Chapter 6 of 11 · 21 min read

Chapter 4: Reactions of Alkenes

What you will learn

  • Why alkenes undergo electrophilic addition, and the carbocation mechanism.

  • Addition of hydrogen, halogens, hydrogen halides and water.

  • Markovnikov's rule, and the peroxide (Kharasch) effect with its free-radical mechanism.

  • Oxidation by Baeyer's reagent and by hot acidic KMnO₄.

  • Ozonolysis: predicting products, and working back from products to the alkene.

  • Addition polymerisation: polythene, polypropene, PVC and Teflon.

4.1 Why alkenes add

The π electrons of C=C lie above and below the plane, loosely held. An electron-poor species (an electrophile, E⁺) is drawn to them. The π bond breaks and two new σ bonds form. The product is saturated. This is an addition reaction.

Two σ bonds are stronger than one σ + one π, so addition is usually exothermic and favourable.

4.2 Addition of hydrogen

H₂ adds over Pt, Pd or Ni to give the alkane (Chapter 1). Vegetable oils contain C=C; hydrogenating them over Ni gives solid vanaspati ghee.

The heat released per mole (enthalpy of hydrogenation) is a measure of alkene stability. A more stable alkene releases less heat. trans-But-2-ene releases less than cis-but-2-ene, which releases less than but-1-ene.

4.3 Addition of halogens

Bromine in CCl₄ (or bromine water) adds across C=C to give a vicinal dibromide. The red-brown colour of bromine disappears. This is the standard test for unsaturation.

CH3CH=CH2+Br2→CCl4CH3CHBr−CH2Br\mathrm{CH_3CH{=}CH_2 + Br_2 \xrightarrow{CCl_4} CH_3CHBr{-}CH_2Br}

Mechanism in short: the approaching Br₂ is polarised by the π cloud. Br⁺ adds to form a three-membered cyclic bromonium ion. Br⁻ then attacks from the opposite face, so the two Br atoms end up on opposite sides (anti addition). Reactivity: Cl₂ > Br₂ > I₂.

4.4 Addition of hydrogen halides and Markovnikov's rule

HX adds to give an alkyl halide. Reactivity is HI > HBr > HCl, because the H–I bond is weakest and gives up H⁺ most easily.

With a symmetrical alkene (ethene, but-2-ene), only one product is possible. With an unsymmetrical alkene such as propene, two products are possible.

Markovnikov's rule: the negative part of the reagent goes to the carbon of C=C that has fewer hydrogen atoms. In other words, H goes where H already is more numerous ("the rich get richer").

CH3CH=CH2+HBr→CH3CHBrCH3 (2-bromopropane, major)\mathrm{CH_3CH{=}CH_2 + HBr \rightarrow CH_3CHBrCH_3\ (2\text{-bromopropane, major})}

Mechanism (electrophilic addition):

  1. H⁺ from HBr attacks the π bond. This is the slow step. It can give either a 2° carbocation, CH₃C⁺HCH₃, or a 1° carbocation, CH₃CH₂C⁺H₂.

  2. The 2° carbocation is more stable (more hyperconjugation and +I effect), so it forms faster.

  3. Br⁻, a nucleophile, attacks the carbocation. Product: 2-bromopropane.

So Markovnikov's rule is really a rule about carbocation stability: 3° > 2° > 1° > CH₃⁺. Where a hydride or methyl shift can make a more stable carbocation, it happens before X⁻ attacks.

4.5 Peroxide effect (Kharasch effect)

In the presence of an organic peroxide such as benzoyl peroxide, HBr adds to unsymmetrical alkenes against Markovnikov's rule. Propene gives 1-bromopropane.

CH3CH=CH2+HBr→(C6H5CO)2O2CH3CH2CH2Br\mathrm{CH_3CH{=}CH_2 + HBr \xrightarrow{(C_6H_5CO)_2O_2} CH_3CH_2CH_2Br}

The mechanism changes from ionic to free-radical.

  • Initiation: the peroxide splits into radicals. (C₆H₅COO)₂ → 2C₆H₅COO· → 2C₆H₅· + 2CO₂. Then C₆H₅· + HBr → C₆H₆ + Br·.

  • Propagation 1: Br· adds to the CH₂ end, giving the more stable 2° radical: CH₃ĊH–CH₂Br. (A 1° radical would form if Br· added to the middle carbon.)

  • Propagation 2: CH₃ĊHCH₂Br + HBr → CH₃CH₂CH₂Br + Br·.

  • Termination: any two radicals combine.

In both cases the more stable intermediate wins. The difference is which atom arrives first: H⁺ in the ionic path, Br· in the radical path.

Only HBr shows the peroxide effect.

ReagentPeroxide effect?Why
HClnoH–Cl bond (about 430 kJ/mol) is too strong for a radical to break.
HBryesBoth propagation steps are exothermic.
HInoH–I breaks easily, but I· radicals pair up to form I₂ instead of adding to C=C.
Figure 4.1 · Markovnikov vs anti-Markovnikov addition of HBr to propene
Figure 4.1 · Markovnikov vs anti-Markovnikov addition of HBr to propene

Both paths pass through the more stable 2° intermediate; the product differs because H⁺ arrives first in the ionic path and Br· arrives first in the radical path.

Worked example 4.1: Give the major product when propene reacts with HBr (i) in the dark with no peroxide, (ii) with benzoyl peroxide.

Solution: (i) Ionic path through the 2° carbocation: 2-bromopropane, CH₃CHBrCH₃. (ii) Radical path through the 2° radical CH₃ĊHCH₂Br: 1-bromopropane, CH₃CH₂CH₂Br.

Worked example 4.2: 2-Methylpropene reacts with HCl in the presence of benzoyl peroxide. Predict the product.

Solution: HCl shows no peroxide effect, so normal Markovnikov addition happens. The 3° carbocation (CH₃)₃C⁺ forms. Product: 2-chloro-2-methylpropane, (CH₃)₃CCl.

Worked example 4.3: 3-Methylbut-1-ene, (CH₃)₂CHCH=CH₂, reacts with HCl. Predict the major product.

Solution: H⁺ adds to the CH₂ end, giving a 2° carbocation (CH₃)₂CH–C⁺HCH₃. A hydride shifts from the neighbouring CH to give the 3° carbocation (CH₃)₂C⁺–CH₂CH₃. Cl⁻ attacks it. The major product is 2-chloro-2-methylbutane, not the "expected" 2-chloro-3-methylbutane.

4.6 Addition of water and of sulphuric acid

With dilute acid as catalyst, water adds across C=C to give an alcohol. The addition follows Markovnikov's rule, again through a carbocation.

CH3CH=CH2+H2O→H+CH3CH(OH)CH3\mathrm{CH_3CH{=}CH_2 + H_2O \xrightarrow{H^+} CH_3CH(OH)CH_3}

Cold concentrated H₂SO₄ adds in the same Markovnikov way to give an alkyl hydrogen sulphate, which is a clear solution. Boiling it with water gives the alcohol.

CH3CH=CH2+H2SO4→CH3CH(OSO3H)CH3→H2O, ΔCH3CH(OH)CH3\mathrm{CH_3CH{=}CH_2 + H_2SO_4 \rightarrow CH_3CH(OSO_3H)CH_3 \xrightarrow{H_2O,\ \Delta} CH_3CH(OH)CH_3}

Worked example 4.4: Which alcohol forms when 2-methylpropene is hydrated with dilute H₂SO₄?

Solution: H⁺ adds to the CH₂ end to give the 3° carbocation (CH₃)₃C⁺. Water attacks it, then loses H⁺. Product: 2-methylpropan-2-ol, (CH₃)₃COH.

4.7 Oxidation

Baeyer's reagent is cold, dilute (about 1%), alkaline KMnO₄. It adds two –OH groups across C=C to give a vicinal diol (a glycol). The purple colour fades and a brown precipitate of MnO₂ appears. This is a second test for unsaturation.

CH2=CH2+H2O+[O]→cold, dil. KMnO4/OH−HOCH2−CH2OH\mathrm{CH_2{=}CH_2 + H_2O + [O] \xrightarrow{cold,\ dil.\ KMnO_4/OH^-} HOCH_2{-}CH_2OH}

Hot acidic KMnO₄ or K₂Cr₂O₇ cuts the C=C bond completely. Each end becomes a C=O group and is then oxidised as far as it can go.

End of C=CProduct with hot acidic KMnO₄
=CH₂CO₂ + H₂O
=CHRRCOOH (carboxylic acid)
=CR₂R₂C=O (ketone, not oxidised further)

Worked example 4.5: Pent-2-ene is heated with acidic KMnO₄. Name the products.

Solution: CH₃CH=CHCH₂CH₃ has two =CHR ends. They give CH₃COOH (ethanoic acid) and CH₃CH₂COOH (propanoic acid).

4.8 Ozonolysis

Ozone adds to C=C to form an ozonide. Treating the ozonide with zinc dust and water splits it into two carbonyl compounds. Zinc removes the H₂O₂ formed, so aldehydes are not oxidised to acids.

Rule: cut the C=C and put =O on each carbon. Everything else stays the same.

R2C=CHR′→(ii) Zn/H2O(i) O3R2C=O+R′CHO\mathrm{R_2C{=}CHR' \xrightarrow[(ii)\ Zn/H_2O]{(i)\ O_3} R_2C{=}O + R'CHO}
AlkeneOzonolysis products
CH₂=CH₂2 HCHO
CH₃CH=CH₂CH₃CHO + HCHO
CH₃CH₂CH=CH₂CH₃CH₂CHO + HCHO
CH₃CH=CHCH₃2 CH₃CHO
(CH₃)₂C=CH₂(CH₃)₂CO + HCHO
(CH₃)₂C=CHCH₃(CH₃)₂CO + CH₃CHO
(CH₃)₂C=C(CH₃)₂2 (CH₃)₂CO

Ozonolysis is a tool for finding where the double bond is. Work backwards: join the two carbonyl carbons with a double bond and remove the two oxygens.

Figure 4.2 · Ozonolysis product map for four alkenes
Figure 4.2 · Ozonolysis product map for four alkenes

Read each row left to right: an end carrying H gives an aldehyde, an end carrying two alkyl groups gives a ketone.

Worked example 4.6: An alkene gives propanone and propanal on ozonolysis. Identify it.

Solution: Propanone is (CH₃)₂C=O; propanal is CH₃CH₂CH=O. Join the carbonyl carbons: (CH₃)₂C=CHCH₂CH₃. Name: 2-methylpent-2-ene.

Worked example 4.7: An alkene C₆H₁₂ gives only propanone on ozonolysis. Identify it.

Solution: Two (CH₃)₂C=O units joined give (CH₃)₂C=C(CH₃)₂, which is C₆H₁₂. Name: 2,3-dimethylbut-2-ene.

4.9 Addition polymerisation

Many alkene molecules join to form a long chain called a polymer. The π bonds open and link the monomers. Polythene is made from ethene at high temperature and pressure with a trace of O₂ or a peroxide as initiator.

n CH2=CH2→high T, Pinitiator−(CH2−CH2)−n\mathrm{n\,CH_2{=}CH_2 \xrightarrow[high\ T,\ P]{initiator} {-}(CH_2{-}CH_2){-}_n}
MonomerPolymerEveryday use
CH₂=CH₂ (ethene)polythenecarry bags, milk pouches
CH₃CH=CH₂ (propene)polypropeneropes, buckets, plastic chairs
CH₂=CHCl (vinyl chloride)PVCwater pipes, electric wire insulation
CF₂=CF₂ (tetrafluoroethene)Teflon (PTFE)non-stick tawa coating
C₆H₅CH=CH₂ (styrene)polystyrenepacking foam, disposable cups

Worked example 4.8: What mass of bromine is decolourised by 2.8 g of ethene?

Solution: Moles of C₂H₄ = 2.8/28 = 0.1 mol. Each mole adds one mole of Br₂ (M = 160 g/mol). Mass of Br₂ = 0.1 × 160 = 16 g.

4.10 Reaction map: alkenes at a glance

Reagent and conditionProduct from CH₃CH=CH₂Type
H₂, Ni/Pt/PdCH₃CH₂CH₃hydrogenation
Br₂ in CCl₄CH₃CHBrCH₂Brelectrophilic addition
HBr (no peroxide)CH₃CHBrCH₃Markovnikov
HBr + peroxideCH₃CH₂CH₂Branti-Markovnikov, radical
HCl or HI (with or without peroxide)CH₃CHXCH₃Markovnikov
H₂O, H⁺CH₃CH(OH)CH₃Markovnikov hydration
cold conc. H₂SO₄CH₃CH(OSO₃H)CH₃Markovnikov
cold dilute alkaline KMnO₄CH₃CH(OH)CH₂OHsyn-dihydroxylation
hot acidic KMnO₄CH₃COOH + CO₂ + H₂Ooxidative cleavage
O₃, then Zn/H₂OCH₃CHO + HCHOozonolysis
heat, pressure, catalystpolypropenepolymerisation

Quick revision

  • Alkenes undergo electrophilic addition; the slow step forms a carbocation.

  • HX reactivity: HI > HBr > HCl. Markovnikov: H to the carbon with more H, via the more stable carbocation.

  • Watch for hydride or methyl shifts that give a 3° carbocation.

  • Peroxide effect: only HBr; free-radical chain; Br· adds first to give the more stable radical; anti-Markovnikov product.

  • Br₂/CCl₄ (red-brown colour lost) and Baeyer's reagent (purple colour lost) both test for C=C.

  • Hot acidic KMnO₄: =CH₂ → CO₂, =CHR → RCOOH, =CR₂ → ketone.

  • Ozonolysis (O₃, Zn/H₂O): replace C=C by two C=O; work backwards to locate C=C.

  • Polythene (ethene), polypropene, PVC (vinyl chloride), Teflon (CF₂=CF₂).

NEET traps

  • Peroxide does not change the product with HCl or HI. Only HBr.

  • In the radical path, Br· (not H·) adds first. Students who add H first get the wrong product.

  • Symmetrical alkenes (but-2-ene) give the same product with or without peroxide.

  • Baeyer's reagent does not cut the C=C bond; it gives a diol. Only hot acidic KMnO₄ cleaves.

  • In ozonolysis, a =CH₂ end gives HCHO, not CO₂. CO₂ comes from KMnO₄ cleavage.

  • Without Zn, H₂O₂ oxidises the aldehydes from ozonolysis to acids.

Practice MCQs: Chapter 4

Level 1: Concept check

1. The characteristic reaction of alkenes is (a) free-radical substitution (b) electrophilic addition (c) nucleophilic substitution (d) elimination

2. Bromine water is decolourised by (a) ethane (b) methane (c) ethene (d) CCl₄

3. Propene reacts with HBr in the absence of peroxide to give mainly (a) 1-bromopropane (b) 2-bromopropane (c) 1,2-dibromopropane (d) propane

4. The peroxide effect is shown by (a) HCl (b) HI (c) HF (d) HBr

5. Baeyer's reagent is (a) acidic K₂Cr₂O₇ (b) cold, dilute, alkaline KMnO₄ (c) hot, concentrated, acidic KMnO₄ (d) bromine water

6. Ozonolysis of ethene followed by Zn/H₂O gives (a) methanal (b) ethanal (c) methanol (d) CO₂

7. The order of reactivity of hydrogen halides towards alkenes is (a) HCl > HBr > HI (b) HBr > HCl > HI (c) HI > HBr > HCl (d) all equal

8. Polythene is made by polymerising (a) ethyne (b) propene (c) ethene (d) vinyl chloride

9. Zinc dust is used in the work-up of ozonides to (a) act as a catalyst (b) remove H₂O₂ so that aldehydes are not oxidised (c) reduce ketones to alcohols (d) regenerate ozone

10. The intermediate in the addition of HBr to propene without peroxide is a (a) free radical (b) carbanion (c) carbocation (d) carbene

Level 2: NEET standard

11. 2-Methylpropene reacts with HBr (no peroxide) to give mainly (a) 1-bromo-2-methylpropane (b) 2-bromo-2-methylpropane (c) 1-bromobutane (d) 2-bromobutane

12. Propene reacts with HBr in the presence of benzoyl peroxide to give mainly (a) 1-bromopropane (b) 2-bromopropane (c) 1,2-dibromopropane (d) 3-bromopropene

13. Acid-catalysed hydration of propene gives (a) propan-1-ol (b) propan-2-ol (c) propanal (d) propanone

14. Ozonolysis of but-2-ene gives (a) two molecules of ethanal (b) methanal and propanal (c) propanone (d) ethanoic acid

15. Which alkene gives propanone and methanal on ozonolysis? (a) But-1-ene (b) But-2-ene (c) 2-Methylpropene (d) Propene

16. 2-Methylpropene is heated with acidic KMnO₄. The products are (a) two molecules of ethanoic acid (b) propanoic acid and CO₂ (c) 2-methylpropane-1,2-diol (d) propanone, CO₂ and H₂O

17. Ethene reacts with cold, dilute, alkaline KMnO₄ to give (a) ethanol (b) ethane-1,2-diol (c) ethanal (d) CO₂ and H₂O

18. HCl does not show the peroxide effect because (a) the H–Cl bond is too strong to be broken by a radical (b) HCl is a gas (c) Cl· is too stable to form (d) HCl is a weak acid

19. The monomer of PVC is (a) CF₂=CF₂ (b) CH₂=CHCN (c) CH₂=CHCl (d) CH₂=CHCH₃

20. The mass of bromine that adds completely to 5.6 g of ethene is (a) 16 g (b) 32 g (c) 64 g (d) 8 g

21. Which alkene gives the same product with HBr whether or not peroxide is present? (a) Propene (b) But-1-ene (c) But-2-ene (d) 2-Methylpropene

22. Ozonolysis of 2-methylbut-2-ene gives (a) propanone and ethanal (b) butanone and methanal (c) two molecules of ethanal (d) propanal and ethanal

Level 3: Challenge

23. 3-Methylbut-1-ene reacts with HCl. The major product is (a) 2-chloro-3-methylbutane (b) 1-chloro-3-methylbutane (c) 2-chloro-2-methylbutane (d) 1-chloro-2-methylbutane

24. An alkene C₆H₁₂ gives only propanone on ozonolysis. It is (a) hex-3-ene (b) 2,3-dimethylbut-2-ene (c) 2-methylpent-2-ene (d) 3,3-dimethylbut-1-ene

25. An alkene gives ethanal and propanal on ozonolysis. It is (a) 2-methylbut-2-ene (b) pent-1-ene (c) 3-methylbut-1-ene (d) pent-2-ene

26. In the peroxide-initiated addition of HBr to propene, the radical formed when Br· adds to the alkene is (a) CH₃ĊHCH₂Br (b) CH₃CHBrĊH₂ (c) CH₃CH₂ĊH₂ (d) BrCH₂CH₂ĊH₂

27. An alkene C₅H₁₀ gives propanone and ethanoic acid with hot acidic KMnO₄. It is (a) pent-2-ene (b) 2-methylbut-1-ene (c) 2-methylbut-2-ene (d) 3-methylbut-1-ene

28. Which statement about the addition of HBr to propene in the presence of peroxide is correct? (a) It goes through a carbocation (b) It gives mainly 2-bromopropane (c) HI behaves the same way (d) It is a free-radical chain reaction

29. Assertion (A): Propene reacts with HBr in the absence of peroxide to give mainly 2-bromopropane. Reason (R): A secondary carbocation is more stable than a primary carbocation. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: An alkene with a terminal =CH₂ group gives methanal as one product of ozonolysis followed by Zn/H₂O. Statement II: Cold, dilute, alkaline KMnO₄ breaks the C=C bond to give carboxylic acids. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1bπ electrons attract electrophiles.
2cBr₂ adds across C=C.
3bMarkovnikov, via 2° carbocation.
4dOnly HBr has both radical steps favourable.
5bCold dilute alkaline KMnO₄.
6aEach CH₂ end becomes HCHO.
7cH–I is the weakest bond.
8cn CH₂=CH₂ → (CH₂CH₂)ₙ.
9bZn destroys H₂O₂.
10cIonic electrophilic addition.
11b3° carbocation (CH₃)₃C⁺.
12aAnti-Markovnikov via 2° radical.
13bMarkovnikov: OH on C-2.
14aSymmetrical cut: 2 CH₃CHO.
15c(CH₃)₂C= gives propanone, =CH₂ gives HCHO.
16d=C(CH₃)₂ → ketone; =CH₂ → CO₂ + H₂O.
17bTwo OH groups added (glycol).
18aH–Cl about 430 kJ/mol; propagation step uphill.
19cVinyl chloride, CH₂=CHCl.
20b5.6/28 = 0.2 mol; 0.2 × 160 = 32 g.
21cSymmetrical; both paths give 2-bromobutane.
22a(CH₃)₂C= → propanone; =CHCH₃ → ethanal.
23cHydride shift gives 3° carbocation.
24bTwo (CH₃)₂C=O joined: (CH₃)₂C=C(CH₃)₂.
25dCH₃CH= joined to =CHCH₂CH₃.
26aBr on CH₂ end gives the 2° radical.
27c(CH₃)₂C= → ketone; =CHCH₃ → CH₃COOH.
28dPeroxide starts a radical chain.
29aStability of 2° cation decides the product.
30cBaeyer's reagent gives a diol, no cleavage.

Chapter 4 revision sheet

One-page summary

  • The π electrons of C=C attract electrophiles, so alkenes undergo electrophilic addition: one π bond breaks, two σ bonds form.

  • H₂ (Ni, Pt or Pd) converts alkenes to alkanes; the heat released measures alkene stability.

  • Br₂ in CCl₄ adds through a cyclic bromonium ion to give a vicinal dibromide; loss of red-brown colour tests for C=C.

  • HX reactivity: HI > HBr > HCl (weaker H–X bond reacts faster).

  • Markovnikov: H goes to the carbon that already has more H; the halide goes to the carbon that gives the more stable carbocation.

  • The slow step is carbocation formation; 3° > 2° > 1° stability decides the product.

  • Carbocations can rearrange (1,2-hydride or 1,2-methyl shift) to become more stable.

  • Peroxide effect (Kharasch): HBr only, free-radical chain, Br· adds first to give the more stable radical, anti-Markovnikov product.

  • Dilute H₂SO₄ adds water (Markovnikov) to give alcohols; cold conc. H₂SO₄ gives alkyl hydrogen sulphates.

  • Baeyer's reagent (cold, dilute, alkaline KMnO₄) gives a vicinal diol; purple colour disappears.

  • Hot acidic KMnO₄: =CH₂ → CO₂ + H₂O, =CHR → RCOOH, =CR₂ → ketone.

  • Ozonolysis (O₃ then Zn/H₂O): each C=C becomes two C=O; Zn stops H₂O₂ oxidising aldehydes.

  • Addition polymers: polythene, polypropene, PVC, Teflon, polystyrene.

  • HBr + but-2-ene gives the same product with or without peroxide (symmetric alkene).

R2C=CR2′→(i) O3 (ii) Zn/H2OR2C=O+O=CR2′\mathrm{R_2C{=}CR'_2 \xrightarrow{(i)\ O_3\ (ii)\ Zn/H_2O} R_2C{=}O + O{=}CR'_2}

Must-remember table

Reagent on propeneProductRule or intermediate
H₂, NiPropaneSyn addition on metal surface
Br₂ in CCl₄1,2-DibromopropaneBromonium ion
HBr (no peroxide)2-BromopropaneMarkovnikov, 2° carbocation
HBr + peroxide1-BromopropaneAnti-Markovnikov, 2° radical
Dil. H₂SO₄ (H₂O/H⁺)Propan-2-olMarkovnikov
Cold dil. alk. KMnO₄Propane-1,2-diolBaeyer's test
Hot acidic KMnO₄CH₃COOH + CO₂ + H₂OOxidative cleavage
O₃, then Zn/H₂OEthanal + methanalOzonolysis

Memory aids

  • "Hydrogen to the Hydrogen-rich": Markovnikov's H goes where H atoms already are.

  • "Peroxide Puts Bromine on the Poor end": with peroxide, Br lands on the carbon with more H.

  • "Only B-R-O": only HBR shows the peROxide effect; HCl and HI do not.

  • "Cut, Cap with O": ozonolysis cuts C=C and caps each end with =O.

  • "Baeyer = Bye, purple": Baeyer's reagent loses its purple colour with C=C.

Concept connections

  • Carbocation and free-radical stability, inductive effect and hyperconjugation come from Chemistry Book 14: Some Basic Principles of Organic Chemistry.

  • Haloalkanes and alcohols made here are developed in Chemistry Book 16: Organic Compounds Containing Halogens and Chemistry Book 17: Organic Compounds Containing Oxygen.

  • KMnO₄ as an oxidant and its colour changes link to Chemistry Book 7: Redox Reactions and Electrochemistry and Chemistry Book 11: d- and f-Block Elements.

Practice MCQs: Chapter 4, Level 4 (new NEET pattern)

31. Match the reaction of propene (List I) with its main product (List II).

List I

  • A. HBr, no peroxide

  • B. HBr with benzoyl peroxide

  • C. H₂O with dilute H₂SO₄

  • D. Br₂ in CCl₄

List II

  • (i) Propan-2-ol

  • (ii) 1,2-Dibromopropane

  • (iii) 1-Bromopropane

  • (iv) 2-Bromopropane

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iv, B-iii, C-ii, D-i (d) A-i, B-iii, C-iv, D-ii

32. Match the alkene (List I) with its ozonolysis products (List II).

List I

  • A. Ethene

  • B. But-2-ene

  • C. 2-Methylpropene

  • D. 2,3-Dimethylbut-2-ene

List II

  • (i) Propanone only

  • (ii) Methanal only

  • (iii) Propanone and methanal

  • (iv) Ethanal only

(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-ii, B-iii, C-iv, D-i (d) A-ii, B-iv, C-i, D-iii

33. Match the alkene (List I) with its organic products on heating with acidic KMnO₄ (List II).

List I

  • A. Propene

  • B. But-2-ene

  • C. 2-Methylpropene

  • D. 2-Methylbut-2-ene

List II

  • (i) Ethanoic acid only

  • (ii) Propanone and CO₂

  • (iii) Ethanoic acid and CO₂

  • (iv) Propanone and ethanoic acid

(a) A-i, B-iii, C-ii, D-iv (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-ii, C-i, D-iv (d) A-iii, B-i, C-ii, D-iv

34. Match the polymer (List I) with its monomer (List II).

List I

  • A. Polythene

  • B. PVC

  • C. Teflon

  • D. Polypropene

List II

  • (i) CF₂=CF₂

  • (ii) CH₂=CHCH₃

  • (iii) CH₂=CH₂

  • (iv) CH₂=CHCl

(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-iii, B-iv, C-ii, D-i

35. How many of the following statements are correct?

  • A. Reactivity towards alkenes is HI > HBr > HCl.

  • B. The peroxide effect is shown by HBr only.

  • C. HBr gives different products with but-2-ene in the presence and absence of peroxide.

  • D. Bromine adds to an alkene through a cyclic bromonium ion.

  • E. Baeyer's reagent converts ethene into ethane-1,2-diol.

(a) 3 (b) 5 (c) 4 (d) 2

36. Choose the correct set of statements.

  • A. In ionic addition of HBr, H⁺ adds to the alkene first.

  • B. In the peroxide effect, Br· adds to the alkene first.

  • C. HCl shows the peroxide effect because the H–Cl bond is weak.

  • D. In the peroxide effect, Br· adds so as to give the more stable carbon radical.

(a) A and C only (b) A, B and D only (c) B, C and D only (d) A, B, C and D

37. How many of the following statements about ozonolysis are correct?

  • A. Ozonolysis followed by Zn/H₂O gives aldehydes and/or ketones.

  • B. Zn dust stops H₂O₂ from oxidising the aldehydes to acids.

  • C. Ozonolysis of cyclohexene gives two molecules of one product.

  • D. An alkene that gives only propanone is 2,3-dimethylbut-2-ene.

(a) 3 (b) 2 (c) 4 (d) 1

38. Choose the correct set of statements.

  • A. HCl adds to 3-methylbut-1-ene to give mainly 2-chloro-2-methylbutane.

  • B. A 1,2-hydride shift can turn a 2° carbocation into a more stable 3° carbocation.

  • C. Carbocation rearrangement also occurs in peroxide-initiated addition of HBr.

  • D. Cold concentrated H₂SO₄ adds to propene to give mainly propyl hydrogen sulphate (1-isomer).

(a) A, B and C only (b) B and D only (c) A and D only (d) A and B only

39. An energy profile for ionic addition of HBr to propene shows two humps: the first hump is much higher than the second, and a shallow valley lies between them. Which reading is correct? (a) The second step has the higher activation energy and decides the rate (b) The first step, forming the carbocation, has the higher activation energy and is rate-determining (c) The species in the valley is a free radical (d) The reaction is a single concerted step

40. An alkene C₆H₁₂ gives propanone and propanal on ozonolysis. The alkene is (a) 2-Methylpent-2-ene (b) Hex-3-ene (c) 3-Methylpent-2-ene (d) 2,3-Dimethylbut-2-ene

41. 5.6 L of ethene at STP is fully converted to polythene. The mass of polymer formed is (a) 14 g (b) 3.5 g (c) 5.6 g (d) 7.0 g

Passage for Q42–43: A student sets up two flasks of 2-methylpropene, (CH₃)₂C=CH₂. Flask 1 gets dry HBr in the dark with no peroxide. Flask 2 gets HBr with a little benzoyl peroxide.

42. The main product in Flask 1 is (a) 1-Bromo-2-methylpropane (b) 2-Bromobutane (c) 2-Bromo-2-methylpropane (d) 1,2-Dibromo-2-methylpropane

43. The main product in Flask 2 and the key intermediate are (a) 1-Bromo-2-methylpropane, via a 1° carbocation (b) 1-Bromo-2-methylpropane, via a 3° carbon radical (c) 2-Bromo-2-methylpropane, via a 3° carbocation (d) 2-Bromo-2-methylpropane, via a 1° radical

44. An alkene X (C₅H₁₀) gives 2-bromo-2-methylbutane with HBr, and methanal plus butanone on ozonolysis. X is (a) 3-Methylbut-1-ene (b) 2-Methylbut-2-ene (c) Pent-1-ene (d) 2-Methylbut-1-ene

45. 0.1 mol of an alkene takes up 2.24 L of H₂ at STP, and its ozonolysis gives only ethanal. Which statement about it is correct? (a) It is 2-methylpropene (b) It gives 1-bromobutane with HBr and peroxide (c) It exists as cis and trans isomers (d) Hot acidic KMnO₄ converts it into propanone

Level 4 answer key

QAnsReason
31bMarkovnikov → 2-bromo; peroxide → 1-bromo; hydration → propan-2-ol; Br₂ → vicinal dibromide
32aReplace C=C by two C=O on each fragment
33d=CH₂ → CO₂; =CHCH₃ → CH₃COOH; =C(CH₃)₂ → propanone
34cPVC from vinyl chloride; Teflon from tetrafluoroethene
35cC is false: but-2-ene is symmetric, both routes give 2-bromobutane
36bH–Cl is strong; HCl shows no peroxide effect
37aC is false: the ring opens to one molecule of hexanedial
38dNo shift in radical addition; cold conc. H₂SO₄ follows Markovnikov (isopropyl)
39bCarbocation formation is slow; Br⁻ capture is fast
40aJoin (CH₃)₂C= and =CHCH₂CH₃ → (CH₃)₂C=CHCH₂CH₃
41d5.6/22.4 = 0.25 mol × 28 g/mol = 7.0 g
42cH⁺ to CH₂ gives the 3° cation; Br⁻ adds there
43bBr· adds to CH₂ giving the 3° radical; H then goes to that carbon
44dCH₂=C(CH₃)CH₂CH₃ fits both; 3-methylbut-1-ene would give 2-methylpropanal
45cOne C=C, two CH₃CH= halves → but-2-ene, which has cis and trans forms
21 min left
‹
›