Chapter 5: Alkynes
What you will learn
The bonding and linear shape of C≡C, and naming and isomerism of alkynes.
Two preparations: from calcium carbide and from vicinal dihalides.
Why a terminal alkyne hydrogen is acidic, and the tests based on it.
Addition of hydrogen, halogens, hydrogen halides and water to alkynes.
Linear and cyclic polymerisation of alkynes.
5.1 Structure, naming and isomerism
Alkynes contain C≡C and have the general formula CₙH₂ₙ₋₂. The first member, ethyne, is commonly called acetylene. It is the gas in the oxy-acetylene torch used by welders at a fabrication shop.
Each carbon of C≡C is sp hybridised. The two sp orbitals point opposite ways, so H–C≡C–H is linear (180°). The two unused p orbitals on each carbon form two π bonds at right angles. The π cloud is a cylinder around the C–C axis.
| Bond | C–C | C=C | C≡C |
|---|---|---|---|
| Bonds present | 1 σ | 1 σ + 1 π | 1 σ + 2 π |
| Hybridisation | sp³ | sp² | sp |
| Bond length (pm) | 154 | 134 | 120 |
| Bond enthalpy (kJ/mol) | about 348 | about 681 | about 823 |
| s-character of carbon orbital | 25% | 33% | 50% |
Naming. Change "-ane" to "-yne" and give C≡C the lowest locant: HC≡CCH₂CH₃ is but-1-yne; CH₃C≡CCH₃ is but-2-yne.
Isomerism. Alkynes show position and chain isomerism. They are functional isomers of dienes (but-1-yne and buta-1,3-diene are both C₄H₆). They do not show geometrical isomerism, because each sp carbon carries only one other group in a straight line.
Worked example 5.1: Write and name all alkynes of formula C₅H₈.
Solution: HC≡CCH₂CH₂CH₃ (pent-1-yne), CH₃C≡CCH₂CH₃ (pent-2-yne) and HC≡CCH(CH₃)₂ (3-methylbut-1-yne). Three in all.
5.2 Preparation of alkynes
(a) From calcium carbide. Limestone is heated to quicklime. Quicklime and coke are heated in an electric furnace to calcium carbide. Water on calcium carbide gives ethyne. Village fruit sellers once used carbide to ripen mangoes; the gas released is ethyne.
(b) From vicinal dihalides. Two molecules of HX are removed in two steps. Alcoholic KOH removes the first to give a vinylic halide. The second is harder to remove, so the stronger base sodamide (NaNH₂) is used.
Worked example 5.2: What volume of ethyne at STP is obtained from 6.4 g of calcium carbide with excess water?
Solution: Molar mass of CaC₂ = 40 + 24 = 64 g/mol. Moles = 6.4/64 = 0.1 mol. One mole of CaC₂ gives one mole of C₂H₂. Volume = 0.1 × 22.4 = 2.24 L.
5.3 Physical properties
The first three alkynes are gases; the next eight are liquids; higher ones are solids. Pure ethyne is colourless and nearly odourless; the garlic smell of carbide gas comes from impurities such as phosphine. Alkynes are weakly polar, lighter than water and insoluble in it.
5.4 Acidic character of terminal alkynes
A hydrogen on a triple-bonded carbon (≡C–H) can be removed by strong bases. This makes terminal alkynes weak acids.
Why? The sp carbon has 50% s-character. s electrons stay closer to the nucleus, so an sp carbon is more electronegative than sp² or sp³ carbon. It pulls the C–H bond pair towards itself, and H leaves as H⁺ more easily. The anion left behind (acetylide, HC≡C⁻) keeps its lone pair in a low-energy sp orbital, so it is relatively stable.
| Compound | Carbon hybridisation | Approximate pKa |
|---|---|---|
| H₂O | (not C–H) | 15.7 |
| HC≡CH | sp | 25 |
| NH₃ | (not C–H) | 38 |
| CH₂=CH₂ | sp² | 44 |
| CH₃CH₃ | sp³ | 50 |
Lower pKa means stronger acid. So acidity order: H₂O > HC≡CH > NH₃ > CH₂=CH₂ > CH₃CH₃. Ethyne is a stronger acid than ammonia, so NaNH₂ removes its proton and NH₃ is released. Water is a stronger acid than ethyne, so acetylides react with water to give back the alkyne.
Alkyl groups push electrons (+I effect) and lower acidity: HC≡CH > CH₃C≡CH. An internal alkyne such as CH₃C≡CCH₃ has no acidic hydrogen at all.
Reactions showing acidity:
Tests for terminal alkynes.
| Reagent | Observation with R–C≡C–H | With internal alkyne or alkene |
|---|---|---|
| Ammoniacal AgNO₃ (Tollens' reagent) | white precipitate of silver acetylide | no precipitate |
| Ammoniacal Cu₂Cl₂ | red-brown precipitate of copper(I) acetylide | no precipitate |
These tests separate but-1-yne from but-2-yne, and ethyne from ethene. Dry metal acetylides are explosive.
Worked example 5.3: Arrange ethane, ethene and ethyne in increasing order of acidity, and explain in one line.
Solution: Ethane < ethene < ethyne. s-character rises from 25% to 33% to 50%, so the carbon becomes more electronegative and holds the C–H electrons more tightly, making H⁺ easier to remove.
Worked example 5.4: How would you distinguish but-1-yne from but-2-yne?
Solution: Add ammoniacal AgNO₃. But-1-yne has a ≡C–H and gives a white precipitate. But-2-yne has no terminal H and gives none.
5.5 Addition reactions of alkynes
Alkynes add two molecules of reagent: one across C≡C to give an alkene, then one more to give a saturated product. Toward electrophiles, alkynes react more slowly than alkenes. The π electrons are held tightly by the more electronegative sp carbons, and the vinylic carbocation (C⁺ on a doubly bonded carbon) formed is less stable.
(a) Hydrogen. Pt, Pd or Ni with excess H₂ gives the alkane. Lindlar's catalyst stops at the cis-alkene; Na in liquid NH₃ stops at the trans-alkene (Chapter 3).
(b) Halogens. Bromine adds twice. The red-brown colour disappears, as with alkenes.
The final product is 1,1,2,2-tetrabromoethane.
(c) Hydrogen halides. HX adds twice, each time by Markovnikov's rule. Both X atoms end on the same carbon, giving a geminal dihalide.
The first Br makes the carbon it sits on better at holding a positive charge (lone pair donation), so the second H goes to the CH₂ end. The product is 2,2-dibromopropane. Ethyne gives 1,1-dibromoethane by the same logic.
(d) Water. Alkynes do not react with water alone. With dilute H₂SO₄ and Hg²⁺ (HgSO₄) at about 333 K, water adds by Markovnikov's rule. The first product is an enol (C=C–OH), which is unstable and shifts at once to a carbonyl compound (tautomerism).
Ethyne is the only alkyne that gives an aldehyde (ethanal). Every other alkyne gives a ketone.
Worked example 5.5: Propyne reacts with two moles of HBr. Name the product.
Solution: First HBr: Markovnikov gives CH₃CBr=CH₂ (2-bromopropene). Second HBr: H to CH₂, Br to C-2. Product: CH₃CBr₂CH₃, 2,2-dibromopropane.
Worked example 5.6: But-1-yne and but-2-yne are each hydrated with HgSO₄ and dilute H₂SO₄. Name the products.
Solution: But-1-yne: OH goes to C-2 (Markovnikov), enol becomes CH₃CH₂COCH₃, butan-2-one. But-2-yne: either carbon takes OH; the product is again butan-2-one. Both give the same ketone.
5.6 Polymerisation
Linear. Ethyne polymerises under suitable catalysts to polyacetylene, –(CH=CH)ₙ–. It conducts electricity and is used in some battery electrodes.
Cyclic. Ethyne passed through a red-hot iron tube at about 873 K trimerises to benzene.
Propyne trimerises the same way to 1,3,5-trimethylbenzene (mesitylene). The methyl groups end up on alternate ring carbons.
Worked example 5.7: 0.52 g of ethyne reacts completely with sodium to form monosodium acetylide. What volume of H₂ at STP is released?
Solution: Moles of C₂H₂ = 0.52/26 = 0.02 mol. From 2HC≡CH + 2Na → 2HC≡CNa + H₂, two moles of ethyne give one mole of H₂. H₂ = 0.01 mol = 0.01 × 22 400 = 224 mL.
Worked example 5.8: Starting from 1,2-dibromoethane, make ethanal in two stages.
Solution: Stage 1: alcoholic KOH, then NaNH₂, gives ethyne. Stage 2: HgSO₄ and dilute H₂SO₄ at 333 K hydrate ethyne to ethanal via vinyl alcohol.
5.7 Reaction map: alkynes at a glance
| Starting alkyne | Reagent and condition | Product |
|---|---|---|
| HC≡CH | H₂ (excess), Pt/Pd/Ni | CH₃CH₃ |
| CH₃C≡CCH₃ | H₂, Lindlar's catalyst | cis-but-2-ene |
| CH₃C≡CCH₃ | Na, liquid NH₃ | trans-but-2-ene |
| HC≡CH | Br₂ (excess) | CHBr₂CHBr₂ |
| CH₃C≡CH | 2 HBr | CH₃CBr₂CH₃ |
| HC≡CH | H₂O, Hg²⁺, H⁺, 333 K | CH₃CHO |
| CH₃C≡CH | H₂O, Hg²⁺, H⁺ | CH₃COCH₃ |
| HC≡CH | Na or NaNH₂ | HC≡C⁻Na⁺ (+ H₂ or NH₃) |
| R–C≡CH | ammoniacal AgNO₃ | R–C≡CAg (white ppt) |
| R–C≡CH | ammoniacal Cu₂Cl₂ | R–C≡CCu (red-brown ppt) |
| HC≡CH | red-hot Fe tube, 873 K | C₆H₆ |
| CH₃C≡CH | red-hot Fe tube | 1,3,5-trimethylbenzene |
Quick revision
C≡C: one σ + two π, sp carbons, linear, 120 pm; no geometrical isomerism.
CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂; vicinal dihalide + alc. KOH, then NaNH₂ → alkyne.
Terminal alkynes are weak acids (pKa about 25) because sp carbon has 50% s-character.
Acidity: H₂O > HC≡CH > NH₃ > CH₂=CH₂ > CH₃CH₃.
Ammoniacal AgNO₃ (white) and ammoniacal Cu₂Cl₂ (red-brown) precipitate only terminal alkynes.
HX adds twice by Markovnikov's rule, giving geminal dihalides.
Hydration (Hg²⁺, H⁺, 333 K): ethyne → ethanal; all others → ketones.
Red-hot iron tube, 873 K: 3 ethyne → benzene; 3 propyne → mesitylene.
NEET traps
Alkynes are less reactive than alkenes towards electrophilic addition, even though they have more π electrons.
Ethyne is acidic but weaker than water. Do not write ethyne > water.
But-2-yne has no acidic hydrogen; it does not react with Na, NaNH₂ or ammoniacal AgNO₃.
HBr twice on propyne gives 2,2-dibromopropane (geminal), not 1,2-dibromopropane (vicinal).
Hydration of propyne gives propanone, not propanal.
The second dehydrohalogenation needs NaNH₂; alc. KOH alone usually stops at the vinyl halide.
Practice MCQs: Chapter 5
Level 1: Concept check
1. The hybridisation of carbon in ethyne is (a) sp (b) sp² (c) sp³ (d) dsp²
2. The H–C–C bond angle in ethyne is (a) 109.5° (b) 120° (c) 180° (d) 90°
3. Calcium carbide reacts with water to give (a) methane (b) ethyne (c) ethene (d) propyne
4. A carbon–carbon triple bond consists of (a) two σ and one π bond (b) three σ bonds (c) three π bonds (d) one σ and two π bonds
5. The general formula of open-chain alkynes is (a) CₙH₂ₙ (b) CₙH₂ₙ₋₂ (c) CₙH₂ₙ₊₂ (d) CₙH₂ₙ₋₆
6. A white precipitate with ammoniacal AgNO₃ is given by (a) ethene (b) but-2-yne (c) propyne (d) ethane
7. Ethyne is hydrated with HgSO₄ and dilute H₂SO₄ at 333 K to give (a) ethanol (b) ethanal (c) ethanoic acid (d) propanone
8. Ethyne passed through a red-hot iron tube at 873 K gives (a) benzene (b) cyclohexane (c) polythene (d) ethane
9. The C≡C bond length is about (a) 154 pm (b) 134 pm (c) 120 pm (d) 139 pm
10. The most acidic hydrocarbon among these is (a) ethyne (b) ethene (c) ethane (d) methane
Level 2: NEET standard
11. The number of alkynes with formula C₅H₈ is (a) 2 (b) 3 (c) 4 (d) 5
12. Propyne reacts with two moles of HBr to give (a) 1,1-dibromopropane (b) 1,2-dibromopropane (c) 2,2-dibromopropane (d) 1,3-dibromopropane
13. Propyne is hydrated with Hg²⁺ and dilute H₂SO₄. The product is (a) propanal (b) propan-2-ol (c) propanoic acid (d) propanone
14. The hydrogen of a terminal alkyne is acidic because (a) the sp carbon, with 50% s-character, is more electronegative and holds the C–H bond pair closer (b) the triple bond has three π bonds (c) the alkyne forms hydrogen bonds (d) the alkyl group shows +I effect
15. Ammoniacal Cu₂Cl₂ can distinguish between (a) ethene and ethane (b) but-1-yne and but-2-yne (c) propene and propane (d) benzene and toluene
16. Ethyne reacts with excess bromine to give (a) 1,2-dibromoethene (b) 1,1-dibromoethane (c) 1,1,2,2-tetrabromoethane (d) bromoethyne
17. The volume of ethyne at STP obtained from 3.2 g of CaC₂ with excess water is (a) 2.24 L (b) 1.12 L (c) 0.56 L (d) 4.48 L
18. The correct order of acidity is (a) HC≡CH > H₂O > NH₃ (b) NH₃ > HC≡CH > H₂O (c) H₂O > HC≡CH > NH₃ (d) HC≡CH > NH₃ > H₂O
19. 1,2-Dibromoethane is converted into ethyne by (a) zinc dust (b) alcoholic KOH followed by NaNH₂ (c) aqueous KOH (d) Na in dry ether
20. But-2-yne is hydrated with HgSO₄ and dilute H₂SO₄. The product is (a) butanal (b) butanoic acid (c) butan-2-ol (d) butan-2-one
21. A functional isomer of but-1-yne is (a) but-2-yne (b) butane (c) buta-1,3-diene (d) but-1-ene
22. Ethyne reacts with sodium metal to give (a) HC≡CNa and H₂ (b) CH₂=CHNa (c) ethane (d) no reaction
Level 3: Challenge
23. Propyne passed through a red-hot iron tube gives (a) benzene (b) toluene (c) 1,3,5-trimethylbenzene (d) 1,2,3-trimethylbenzene
24. Alkynes are less reactive than alkenes towards electrophilic addition because (a) the π electrons are held more tightly by sp carbons and the vinylic carbocation is less stable (b) alkynes have fewer π electrons (c) alkynes are saturated (d) alkynes are strongly polar
25. An alkyne C₄H₆ gives a red-brown precipitate with ammoniacal Cu₂Cl₂ and gives butan-2-one on hydration. It is (a) but-2-yne (b) but-1-yne (c) buta-1,3-diene (d) cyclobutene
26. 1.04 g of ethyne reacts completely with sodium to form monosodium acetylide. The volume of H₂ released at STP is (a) 448 mL (b) 112 mL (c) 896 mL (d) 224 mL
27. Ethyne reacts with one mole of HBr and the product then reacts with a second mole of HBr. The final product is (a) 1,2-dibromoethane (b) 1,1-dibromoethane (c) bromoethane (d) 1,1,2-tribromoethane
28. Which alkyne gives an aldehyde on hydration with HgSO₄ and dilute H₂SO₄? (a) Propyne (b) But-1-yne (c) But-2-yne (d) Ethyne
29. Assertion (A): Ethyne gives a white precipitate with ammoniacal silver nitrate. Reason (R): Ethyne is a linear molecule. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Alkynes show geometrical isomerism about the triple bond. Statement II: Silver and copper acetylides are formed only by alkynes with a terminal ≡C–H. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | Two σ bonds per carbon, linear. |
| 2 | c | sp carbons are linear. |
| 3 | b | CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂. |
| 4 | d | One head-on and two sideways overlaps. |
| 5 | b | Two fewer H than the alkene. |
| 6 | c | Propyne has a terminal ≡C–H. |
| 7 | b | Vinyl alcohol tautomerises to CH₃CHO. |
| 8 | a | Cyclic trimerisation. |
| 9 | c | Shortest C–C bond. |
| 10 | a | sp carbon, 50% s-character. |
| 11 | b | Pent-1-yne, pent-2-yne, 3-methylbut-1-yne. |
| 12 | c | Two Markovnikov additions give a geminal dibromide. |
| 13 | d | OH on C-2; enol becomes CH₃COCH₃. |
| 14 | a | Higher s-character, more electronegative carbon. |
| 15 | b | Only but-1-yne has ≡C–H. |
| 16 | c | Two Br₂ add across C≡C. |
| 17 | b | 3.2/64 = 0.05 mol × 22.4 = 1.12 L. |
| 18 | c | pKa 15.7, 25, 38. |
| 19 | b | Double dehydrohalogenation; NaNH₂ for the second step. |
| 20 | d | Symmetrical alkyne gives CH₃COCH₂CH₃. |
| 21 | c | Same formula C₄H₆, different functional group. |
| 22 | a | 2HC≡CH + 2Na → 2HC≡CNa + H₂. |
| 23 | c | Methyls on alternate ring carbons. |
| 24 | a | Tightly held π electrons, unstable vinylic cation. |
| 25 | b | Terminal alkyne; hydration gives butan-2-one. |
| 26 | a | 1.04/26 = 0.04 mol C₂H₂ → 0.02 mol H₂ = 448 mL. |
| 27 | b | Both Br on the same carbon (Markovnikov). |
| 28 | d | Only ethyne gives an aldehyde (ethanal). |
| 29 | b | Precipitate is due to acidic H, not linear shape. |
| 30 | d | Linear C≡C gives no cis/trans; only terminal alkynes form acetylides. |
Chapter 5 revision sheet
One-page summary
Alkynes CₙH₂ₙ₋₂ contain C≡C: one σ bond and two π bonds at right angles.
sp carbons, linear (180°); C≡C is 120 pm, the shortest carbon–carbon bond.
Suffix -yne; isomers are chain, position and functional (with dienes); no geometrical isomerism.
Ethyne from calcium carbide: CaO + 3C → CaC₂ + CO; CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂.
Vicinal dihalide + alcoholic KOH gives a vinyl halide; NaNH₂ removes the second HX to give the alkyne.
Terminal alkynes are weak acids (pKa about 25): sp carbon has 50% s-character and holds the carbanion pair tightly.
Acidity: H₂O > HC≡CH > NH₃ > CH₂=CH₂ > CH₃CH₃.
Na or NaNH₂ converts terminal alkynes into acetylides; NaOH cannot do it fully.
Ammoniacal AgNO₃ gives a white precipitate and ammoniacal Cu₂Cl₂ a red-brown precipitate with terminal alkynes only.
Additions: H₂ (twice), X₂ (twice, giving tetrahaloalkane), HX (twice by Markovnikov, giving geminal dihalide).
Hydration with Hg²⁺/H⁺ at 333 K goes through an enol: ethyne → ethanal; other alkynes → ketones.
Alkynes are less reactive than alkenes towards electrophilic addition.
Cyclic polymerisation (red-hot Fe tube, 873 K): 3 ethyne → benzene; 3 propyne → mesitylene.
Linear polymerisation gives polyacetylene, which conducts electricity when doped.
Must-remember table
| Quantity or reaction | Value or product |
|---|---|
| C≡C bond length | 120 pm |
| s-character: sp, sp², sp³ | 50%, 33%, 25% |
| Approximate pKa: H₂O, HC≡CH, NH₃, C₂H₄, C₂H₆ | 15.7, 25, 38, 44, 50 |
| CaC₂ + 2H₂O | C₂H₂ + Ca(OH)₂ |
| Propyne + 2HBr | 2,2-Dibromopropane |
| Ethyne + excess Br₂ | 1,1,2,2-Tetrabromoethane |
| Propyne + H₂O (Hg²⁺/H⁺) | Propanone |
| 3 Propyne, 873 K, Fe | 1,3,5-Trimethylbenzene |
Memory aids
"Fifty Percent, Fully Pulled": 50% s-character pulls the carbanion pair close, so terminal alkynes are acidic.
"Water-Ethyne-Ammonia-Ethene-Ethane" (WEAEE, "we AEE"): acidity in falling order.
"Silver Shows Terminals": ammoniacal Ag⁺ and Cu⁺ precipitate only terminal alkynes (C≡C–H).
"Only Ethyne gets an Aldehyde": hydration of every other alkyne gives a ketone.
"Three Make a Ring": three alkyne units at 873 K close into a benzene ring.
Concept connections
Hybridisation and bond lengths come from Chemistry Book 3: Chemical Bonding and Molecular Structure.
pKa and acid–base strength link to Chemistry Book 6: Equilibrium.
Ethanal and propanone formed by hydration are studied in Chemistry Book 17: Organic Compounds Containing Oxygen.
Practice MCQs: Chapter 5, Level 4 (new NEET pattern)
31. Match the reaction (List I) with its product (List II).
List I
A. CaC₂ + H₂O
B. Propyne + H₂O, Hg²⁺/H⁺
C. Ethyne + H₂O, Hg²⁺/H⁺
D. Propyne through a red-hot iron tube, 873 K
List II
(i) Ethanal
(ii) 1,3,5-Trimethylbenzene
(iii) Ethyne
(iv) Propanone
(a) A-iii, B-i, C-iv, D-ii (b) A-iv, B-iii, C-i, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii
32. Match the compound (List I) with its approximate pKa (List II).
List I
A. Ethyne
B. Ethene
C. Ethane
D. Water
List II
(i) 44
(ii) 15.7
(iii) 25
(iv) 50
(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-ii, B-i, C-iv, D-iii
33. Match the test (List I) with the observation (List II).
List I
A. Ammoniacal AgNO₃ + propyne
B. Ammoniacal Cu₂Cl₂ + ethyne
C. Bromine water + ethyne
D. Ammoniacal AgNO₃ + but-2-yne
List II
(i) No precipitate
(ii) Red-brown precipitate
(iii) White precipitate
(iv) Brown colour of the reagent disappears
(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-ii, C-i, D-iv
34. Match List I with List II.
List I
A. C≡C bond length
B. C=C bond length
C. C–C bond length
D. s-character of an sp orbital
List II
(i) 154 pm
(ii) 50%
(iii) 120 pm
(iv) 134 pm
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
35. How many of the following statements are correct?
A. Ethyne is linear, with an H–C–C angle of 180°.
B. Alkynes show geometrical isomerism.
C. HC≡C⁻ is a stronger base than OH⁻.
D. Sodium metal reacts with ethyne to release H₂.
E. But-2-yne reacts with NaNH₂ to give a sodium acetylide.
(a) 2 (b) 4 (c) 5 (d) 3
36. Choose the correct set of statements.
A. Alkynes are less reactive than alkenes towards electrophilic addition.
B. Propyne adds two molecules of HBr to give 2,2-dibromopropane.
C. Excess bromine converts ethyne into 1,1,2,2-tetrabromoethane.
D. Acid-catalysed hydration of propyne gives propanal.
(a) A, B and C only (b) B and D only (c) A and D only (d) A, B, C and D
37. How many of the following statements are correct?
A. CaC₂ is made by heating quicklime with coke at a very high temperature.
B. 1,2-Dibromoethane with alcoholic KOH and then NaNH₂ gives ethyne.
C. Hydrolysis of CaC₂ gives Ca(OH)₂ as the by-product.
D. Alcoholic KOH alone usually stops at the vinyl halide stage.
(a) 3 (b) 4 (c) 2 (d) 1
38. Choose the correct set of statements.
A. Ethyne passed through a red-hot iron tube at 873 K gives benzene.
B. Three molecules of propyne give 1,2,3-trimethylbenzene.
C. Linear polymerisation of ethyne gives polyacetylene, which conducts electricity when doped.
D. One benzene molecule forms from two ethyne molecules.
(a) A, B and C only (b) B and D only (c) A and C only (d) C and D only
39. A table gives approximate pKa values: CH₃CH₃ 50, CH₂=CH₂ 44, NH₃ 38, HC≡CH 25, H₂O 15.7. Which conclusion is correct? (a) NaOH converts ethyne completely into sodium acetylide (b) Ethene is a stronger acid than ethyne (c) NH₂⁻ is a weaker base than HC≡C⁻ (d) NaNH₂ can deprotonate ethyne because NH₃ is a weaker acid than ethyne
40. A table shows: sp³ carbon 25% s-character, sp² 33%, sp 50%; C–H acidity rises in the same order. The best explanation is (a) more s-character makes the carbon less electronegative (b) more s-character keeps the carbanion lone pair closer to the nucleus, so the conjugate base is more stable (c) the sp carbon is the least electronegative (d) acidity falls as s-character rises
41. 3.2 g of CaC₂ reacts with excess water. The volume of ethyne formed at STP is (a) 2.24 L (b) 0.56 L (c) 1.12 L (d) 3.36 L
Passage for Q42–43: Two unlabelled bottles hold but-1-yne and but-2-yne. A student adds ammoniacal AgNO₃ to a sample of each. She then warms fresh samples of each with dilute H₂SO₄ and HgSO₄.
42. Which liquid gives a white precipitate? (a) But-2-yne only (b) Both (c) Neither (d) But-1-yne only
43. The hydration products are (a) butanal from but-1-yne and butanone from but-2-yne (b) butanone from both (c) butanal from both (d) butanone and butan-2-ol
44. The volume of ethyne at STP needed to make 7.8 g of benzene by cyclic polymerisation (100% yield) is (a) 6.72 L (b) 2.24 L (c) 4.48 L (d) 22.4 L
45. Compound X (C₃H₄) gives a white precipitate with ammoniacal AgNO₃ and adds two moles of HBr. X and its acid-catalysed hydration product (Hg²⁺) are (a) Propyne; propanal (b) Propa-1,2-diene; propanone (c) Propyne; propanone (d) Cyclopropene; propanal
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | d | Carbide → ethyne; propyne → ketone; ethyne → aldehyde; 3 propyne → mesitylene |
| 32 | a | Ethyne 25, ethene 44, ethane 50, water 15.7 |
| 33 | b | Ag⁺ white, Cu⁺ red-brown; Br₂ adds; internal alkyne has no acidic H |
| 34 | c | 120, 134, 154 pm; sp = 50% s |
| 35 | d | A, C, D true; no cis–trans in linear alkynes; but-2-yne has no C≡C–H |
| 36 | a | Propyne hydration gives propanone |
| 37 | b | All four are correct |
| 38 | c | Propyne gives 1,3,5-trimethylbenzene; three ethyne units make one benzene |
| 39 | d | Stronger acid displaces weaker one; NH₃ (38) is weaker than ethyne (25) |
| 40 | b | s-orbitals sit closer to the nucleus |
| 41 | c | 3.2/64 = 0.05 mol × 22.4 = 1.12 L |
| 42 | d | Only the terminal alkyne has C≡C–H |
| 43 | b | Both give CH₃COCH₂CH₃ (Markovnikov enol, then keto form) |
| 44 | a | 0.1 mol benzene needs 0.3 mol ethyne × 22.4 = 6.72 L |
| 45 | c | Terminal alkyne C₃H₄ is propyne; hydration gives a ketone |