Chapter 3 of 10 · 27 min read

Chapter 1: Conductors, Insulators and Semiconductors

What you will learn

  • How solids are sorted by resistivity into conductors, semiconductors and insulators.

  • What valence band, conduction band and band gap mean, and how the gap decides behaviour.

  • How electrons and holes form in a pure (intrinsic) semiconductor.

  • How doping makes n-type and p-type semiconductors.

  • The mass action law n_e n_h = n_i² and how to use it in numericals.

  • How conductivity depends on carrier number and mobility.

1.1 Sorting solids by resistivity

A copper wire in your ceiling fan carries current with almost no loss. The plastic cover on that wire carries almost none. Silicon sits in between.

We sort solids by resistivity ρ (or its inverse, conductivity σ = 1/ρ).

ClassResistivity ρ (Ω m)Conductivity σ (S m⁻¹)Examples
Conductors (metals)10⁻⁸ to 10⁻²10² to 10⁸Copper, silver, aluminium
Semiconductors10⁻⁵ to 10⁶10⁻⁶ to 10⁵Silicon, germanium, GaAs
Insulators10¹¹ to 10¹⁹10⁻¹⁹ to 10⁻¹¹Glass, wood, diamond

Semiconductors come in two kinds:

  • Elemental: Si and Ge (group 14, four valence electrons).

  • Compound: inorganic ones like GaAs, CdS, InP; organic ones like anthracene; and organic polymers like polypyrrole.

Resistivity alone is not the whole story. The real difference lies in how electron energies are arranged inside the solid. That is the band picture.

1.2 Energy bands

In a single atom, an electron can have only certain sharp energy levels. In a crystal, about 10²⁸ atoms per cubic metre sit close together. Their outer levels overlap and spread into nearly continuous ranges of energy, called bands.

Two bands matter:

  • Valence band (VB): the band holding the valence electrons. At 0 K it is completely full in semiconductors and insulators.

  • Conduction band (CB): the next band up. Electrons here are free to move and carry current.

The energy gap between the top of the VB (E_v) and the bottom of the CB (E_c) is the band gap.

Eg=Ec−EvE_g = E_c - E_v

No electron state exists inside the gap of a pure crystal. An electron must gain at least E_g to jump from VB to CB.

Figure 1.1 · Energy bands of a conductor, a semiconductor and an insulator
Figure 1.1 · Energy bands of a conductor, a semiconductor and an insulator

Read left to right: the gap between the valence and conduction bands goes from zero (overlap) to small to large.

The size of E_g sorts the solid:

PropertyConductorSemiconductorInsulator
Band gap E_gZero (bands overlap) or CB partly filledSmall, less than about 3 eVLarge, more than about 3 eV
Typical valuesCopper, sodiumSi: 1.1 eV, Ge: 0.7 eV, GaAs: 1.4 eVDiamond: about 5.4 eV
Electrons in CB at room temperatureVery manyA few, thermally excitedPractically none
At 0 KConductsBehaves as insulatorInsulator
Effect of heating on ρρ risesρ falls sharplyStays very high

At room temperature, thermal energy kT is only about 0.026 eV. That sounds tiny compared with 1.1 eV. But among 10²⁸ electrons, a small fraction still gains enough energy to cross the gap of Si. For diamond the fraction is so small that it stays an insulator.

Carbon, silicon and germanium all have four valence electrons. They differ in band gap: C (diamond) about 5.4 eV, Si 1.1 eV, Ge 0.7 eV. So diamond insulates, while Si and Ge are semiconductors.

Worked example 1.1: The band gap of silicon is 1.1 eV. Find the longest wavelength of light that can create an electron-hole pair in silicon.

Solution: The photon energy must be at least E_g. Using E = hc/λ with hc ≈ 1240 eV nm:

λmax=hcEg=12401.1 nm≈1127 nm\lambda_{max} = \frac{hc}{E_g} = \frac{1240}{1.1}\ \text{nm} \approx 1127\ \text{nm}

So λ_max ≈ 1.13 μm, in the infrared. Visible light (400 to 700 nm) easily creates pairs in Si.

1.3 Intrinsic semiconductors

A pure semiconductor crystal is called intrinsic.

Each Si atom shares its four valence electrons with four neighbours. This makes four covalent bonds in a tetrahedral pattern. At 0 K every electron is locked in a bond, so the crystal does not conduct.

At room temperature, heat breaks a few bonds. Each broken bond releases one free electron into the CB. It also leaves an empty spot in the bond. This vacancy is a hole.

A hole behaves like a positive charge +e:

  • A neighbouring bound electron can jump into the hole.

  • The hole then appears where that electron came from.

  • So the hole moves opposite to the electrons, like a gap moving backwards through a queue at a chai stall as each person steps forward.

In an intrinsic crystal, every free electron leaves exactly one hole. So:

ne=nh=nin_e = n_h = n_i

Here n_i is the intrinsic carrier concentration (per m³). It depends strongly on temperature and band gap.

Under an electric field, electrons drift one way and holes the other. Both give current in the same direction:

I=Ie+IhI = I_e + I_h

Electrons and holes also keep recombining. At steady temperature, the rate of generation equals the rate of recombination, so n_i stays fixed.

Temperature effect. As temperature rises, many more bonds break. n_i rises very fast. Mobility falls a little because of more lattice vibration, but the carrier increase wins. So the resistivity of a semiconductor falls with temperature. We say it has a negative temperature coefficient of resistance. Metals show the opposite.

1.4 Extrinsic semiconductors: doping

Pure Si has too few carriers to be useful. We add a tiny, controlled amount of impurity. This is doping, and the doped crystal is extrinsic. Typical doping is a few parts per million.

The dopant atom must be about the same size as Si so that it fits into the lattice without distorting it.

n-type (pentavalent dopant). Add a group 15 atom: phosphorus (P), arsenic (As) or antimony (Sb).

  • Four of its five valence electrons form bonds with neighbouring Si atoms.

  • The fifth electron is held very loosely. About 0.01 eV (Ge) to 0.05 eV (Si) frees it.

  • At room temperature almost every donor gives one free electron. The donor becomes a fixed positive ion.

  • In the band picture, a donor level E_D sits just below the CB.

Electrons are the majority carriers. Holes are minority carriers. The dopant is called a donor.

p-type (trivalent dopant). Add a group 13 atom: boron (B), aluminium (Al), gallium (Ga) or indium (In).

  • It has only three valence electrons, so one of the four bonds is missing an electron.

  • A neighbouring electron fills it, leaving a hole that can move.

  • The dopant becomes a fixed negative ion. It accepted an electron, so it is called an acceptor.

  • In the band picture, an acceptor level E_A sits just above the VB.

Holes are the majority carriers. Electrons are minority carriers.

Featuren-typep-type
Dopant group15 (pentavalent)13 (trivalent)
ExamplesP, As, SbB, Al, Ga, In
Dopant nameDonorAcceptor
Fixed ion left behindPositiveNegative
Extra levelE_D just below CBE_A just above VB
Majority carriersElectronsHoles
Minority carriersHolesElectrons
Net charge of crystalZeroZero

Both types are electrically neutral. Every free electron in n-type is balanced by a positive donor ion or a hole. Every hole in p-type is balanced by a negative acceptor ion or an electron.

1.5 The mass action law

Doping adds many majority carriers. These carriers meet minority carriers and recombine more often. So doping lowers the minority carrier count below n_i.

At thermal equilibrium, the product of the two concentrations stays fixed at a given temperature:

ne nh=ni2n_e \, n_h = n_i^2

For a heavily doped n-type crystal with donor concentration N_D (much larger than n_i):

ne≈ND,nh=ni2NDn_e \approx N_D, \qquad n_h = \frac{n_i^2}{N_D}

For p-type with acceptor concentration N_A (much larger than n_i):

nh≈NA,ne=ni2NAn_h \approx N_A, \qquad n_e = \frac{n_i^2}{N_A}

If both donors and acceptors are present, the larger one wins by the difference. For example, if N_D is greater than N_A, then n_e ≈ N_D − N_A.

Worked example 1.2: A silicon crystal has n_i = 1.5 × 10¹⁶ m⁻³. It is doped with donors at 4 × 10²² m⁻³. Find the hole concentration.

Solution: n_e ≈ N_D = 4 × 10²² m⁻³. Then

nh=ni2ne=(1.5×1016)24×1022=2.25×10324×1022≈5.6×109 m−3n_h = \frac{n_i^2}{n_e} = \frac{(1.5 \times 10^{16})^2}{4 \times 10^{22}} = \frac{2.25 \times 10^{32}}{4 \times 10^{22}} \approx 5.6 \times 10^{9}\ \text{m}^{-3}

Holes are now about 10¹³ times fewer than electrons.

Worked example 1.3: Silicon has 5 × 10²⁸ atoms per m³. It is doped with indium at one atom in every 10⁷ Si atoms. Take n_i = 1.5 × 10¹⁶ m⁻³. Find n_h and n_e, and name the type.

Solution: Indium is trivalent, so the crystal is p-type.

NA=5×1028107=5×1021 m−3≈nhN_A = \frac{5 \times 10^{28}}{10^{7}} = 5 \times 10^{21}\ \text{m}^{-3} \approx n_h
ne=ni2nh=2.25×10325×1021=4.5×1010 m−3n_e = \frac{n_i^2}{n_h} = \frac{2.25 \times 10^{32}}{5 \times 10^{21}} = 4.5 \times 10^{10}\ \text{m}^{-3}

Worked example 1.4: In a semiconductor sample, the electron concentration is four times the hole concentration. If n_i = 3 × 10¹⁶ m⁻³, find n_e and n_h.

Solution: Put n_e = 4n_h into n_e n_h = n_i²:

4nh2=ni2⇒nh=ni2=1.5×1016 m−34 n_h^2 = n_i^2 \Rightarrow n_h = \frac{n_i}{2} = 1.5 \times 10^{16}\ \text{m}^{-3}

So n_e = 6 × 10¹⁶ m⁻³. The sample is n-type.

1.6 Conductivity of a semiconductor

Mobility μ tells how fast a carrier drifts per unit field:

μ=vdE\mu = \frac{v_d}{E}

Its unit is m² V⁻¹ s⁻¹. Electrons in the CB move more freely than holes, so usually μ_e is greater than μ_h.

Derivation. Take a bar of area A in a field E. The electron current density is J_e = n_e e v_e = n_e e μ_e E. The hole current density is J_h = n_h e μ_h E. Both add, since holes drift the other way but carry opposite charge:

J=e (neμe+nhμh) E=σEJ = e\,(n_e \mu_e + n_h \mu_h)\,E = \sigma E
σ=1ρ=e (neμe+nhμh)\sigma = \frac{1}{\rho} = e\,(n_e \mu_e + n_h \mu_h)

For an intrinsic crystal, n_e = n_h = n_i, so σ = n_i e (μ_e + μ_h). For a heavily doped crystal, keep only the majority term.

The ratio of electron current to hole current in the same sample is:

IeIh=neμenhμh\frac{I_e}{I_h} = \frac{n_e \mu_e}{n_h \mu_h}

Worked example 1.5: Intrinsic germanium has n_i = 2.5 × 10¹⁹ m⁻³, μ_e = 0.39 m² V⁻¹ s⁻¹ and μ_h = 0.19 m² V⁻¹ s⁻¹. Find its conductivity and resistivity.

Solution:

σ=nie(μe+μh)=2.5×1019×1.6×10−19×0.58=2.32 S m−1\sigma = n_i e(\mu_e + \mu_h) = 2.5 \times 10^{19} \times 1.6 \times 10^{-19} \times 0.58 = 2.32\ \text{S m}^{-1}

ρ = 1/σ ≈ 0.43 Ω m.

Worked example 1.6: An n-type silicon sample has n_e = 8 × 10²¹ m⁻³ and μ_e = 0.13 m² V⁻¹ s⁻¹. Neglect holes. Find its resistivity.

Solution: σ = n_e e μ_e = 8 × 10²¹ × 1.6 × 10⁻¹⁹ × 0.13 = 166.4 S m⁻¹. So ρ = 1/166.4 ≈ 6.0 × 10⁻³ Ω m. Doping has cut the resistivity by a huge factor compared with pure Si (about 2 × 10³ Ω m).

Worked example 1.7 (NEET-hard): Silicon is doped with 5 × 10²² m⁻³ phosphorus atoms and 3 × 10²² m⁻³ boron atoms. Take n_i = 1.5 × 10¹⁶ m⁻³. Find the type and the minority carrier concentration.

Solution: Phosphorus gives donors, boron gives acceptors. The acceptors capture as many electrons as they can, so the net free electrons are

ne≈ND−NA=2×1022 m−3n_e \approx N_D - N_A = 2 \times 10^{22}\ \text{m}^{-3}

The crystal is n-type. The minority holes:

nh=(1.5×1016)22×1022≈1.1×1010 m−3n_h = \frac{(1.5 \times 10^{16})^2}{2 \times 10^{22}} \approx 1.1 \times 10^{10}\ \text{m}^{-3}

Quick revision

  • Band gap: conductor zero (overlap), semiconductor below about 3 eV, insulator above about 3 eV.

  • Si 1.1 eV, Ge 0.7 eV, diamond about 5.4 eV.

  • Intrinsic: n_e = n_h = n_i; at 0 K it is an insulator.

  • n-type: group 15 donor, donor level just below CB, electrons majority.

  • p-type: group 13 acceptor, acceptor level just above VB, holes majority.

  • Both types are electrically neutral.

  • Mass action law: n_e n_h = n_i² at a given temperature.

  • σ = e(n_e μ_e + n_h μ_h); semiconductor resistivity falls as temperature rises.

NEET traps

  • Saying n-type is negatively charged. It is neutral; "n" names the majority carrier, not the net charge.

  • Mixing up donor and acceptor positions: donor level is near the CB, acceptor level is near the VB.

  • Using n_h = n_i in a doped crystal. Doping lowers the minority count to n_i²/N.

  • Forgetting that the hole current adds to the electron current in the same direction.

  • Thinking higher temperature always raises resistance. That is true for metals, false for semiconductors.

  • Forgetting to convert ppm or "one in 10⁷" into a concentration before using n_e n_h = n_i².

Practice MCQs: Chapter 1

Level 1: Concept check

1. The band gap of a typical insulator is (a) zero (b) less than 1 eV (c) about 1 eV (d) more than 3 eV

2. A pure silicon crystal at 0 K behaves as (a) a good conductor (b) an insulator (c) an n-type semiconductor (d) a p-type semiconductor

3. To make n-type silicon, the dopant used is (a) boron (b) indium (c) phosphorus (d) aluminium

4. The majority charge carriers in a p-type semiconductor are (a) holes (b) free electrons (c) positive donor ions (d) negative acceptor ions

5. The net charge on a piece of n-type semiconductor is (a) negative (b) zero (c) positive (d) negative or positive depending on doping

6. When the temperature of a semiconductor rises, its resistivity (a) increases (b) stays the same (c) first increases then decreases (d) decreases

7. In a metal, the valence and conduction bands (a) overlap, or the conduction band is partly filled (b) are separated by a gap of about 1 eV (c) are separated by a gap of more than 5 eV (d) are both completely empty

8. In an n-type semiconductor, the donor energy level lies (a) just above the valence band (b) at the middle of the gap (c) just below the conduction band (d) inside the valence band

9. In a semiconductor in thermal equilibrium, the product n_e n_h equals (a) n_i (b) 2n_i (c) n_i/2 (d) n_i²

10. Which of these is an elemental semiconductor? (a) Germanium (b) Gallium arsenide (c) Cadmium sulphide (d) Indium phosphide

Level 2: NEET standard

11. Pure silicon with n_i = 1.5 × 10¹⁶ m⁻³ is doped with acceptors at 3 × 10²¹ m⁻³. The electron concentration is (a) 1.5 × 10¹⁶ m⁻³ (b) 7.5 × 10¹⁰ m⁻³ (c) 3 × 10²¹ m⁻³ (d) 4.5 × 10⁵ m⁻³

12. The band gap of germanium is 0.7 eV. The longest wavelength that can create an electron-hole pair in it is about (a) 0.89 μm (b) 1.13 μm (c) 1.77 μm (d) 2.48 μm

13. An intrinsic sample has n_i = 1.0 × 10¹⁹ m⁻³, μ_e = 0.40 m² V⁻¹ s⁻¹ and μ_h = 0.20 m² V⁻¹ s⁻¹. Its conductivity is (a) 0.96 S m⁻¹ (b) 0.64 S m⁻¹ (c) 0.32 S m⁻¹ (d) 1.92 S m⁻¹

14. An n-type sample has n_e = 5 × 10²² m⁻³ and μ_e = 0.15 m² V⁻¹ s⁻¹. Neglecting holes, its resistivity is about (a) 1.2 × 10³ Ω m (b) 8.3 × 10⁻² Ω m (c) 1.2 × 10⁻³ Ω m (d) 8.3 × 10⁻⁴ Ω m

15. In a semiconductor sample, n_e is 4 times n_h, and μ_e is 3 times μ_h. The ratio of electron current to hole current is (a) 4/3 (b) 12 (c) 3/4 (d) 7

16. At a fixed temperature, the donor concentration in an n-type sample is doubled. The hole concentration becomes (a) double (b) unchanged (c) half (d) one-fourth

17. Silicon (5 × 10²⁸ atoms m⁻³) is doped with antimony at 2 parts per million. With n_i = 1.5 × 10¹⁶ m⁻³, the hole concentration is (a) 2.25 × 10⁹ m⁻³ (b) 4.5 × 10⁹ m⁻³ (c) 1.0 × 10²³ m⁻³ (d) 1.5 × 10¹⁶ m⁻³

18. In the band diagram of p-type silicon, the acceptor level lies (a) just below the conduction band (b) exactly at the middle of the gap (c) inside the conduction band (d) just above the valence band

19. Electrons in a sample have mobility 0.12 m² V⁻¹ s⁻¹. In a field of 500 V m⁻¹, their drift speed is (a) 6 m s⁻¹ (b) 60 m s⁻¹ (c) 600 m s⁻¹ (d) 4.2 × 10³ m s⁻¹

20. In a sample, n_e = 9n_h and n_i = 6 × 10¹⁷ m⁻³. The hole concentration is (a) 6 × 10¹⁷ m⁻³ (b) 1.8 × 10¹⁸ m⁻³ (c) 2 × 10¹⁷ m⁻³ (d) 6.7 × 10¹⁶ m⁻³

21. Which statement is false? (a) Holes are the main charge carriers in metals (b) A hole behaves like a charge +e (c) Hole mobility is usually less than electron mobility (d) In an intrinsic semiconductor, n_e = n_h

22. The band gap of silicon is 1.1 eV. Light of which wavelength cannot create electron-hole pairs in pure silicon? (a) 600 nm (b) 900 nm (c) 1000 nm (d) 1300 nm

Level 3: Challenge

23. Intrinsic germanium has resistivity 0.5 Ω m, with μ_e = 0.38 and μ_h = 0.18 m² V⁻¹ s⁻¹. Its intrinsic carrier concentration is about (a) 1.1 × 10¹⁹ m⁻³ (b) 4.5 × 10¹⁹ m⁻³ (c) 2.2 × 10¹⁹ m⁻³ (d) 3.3 × 10¹⁹ m⁻³

24. An n-type silicon bar is 2 cm long with cross-section 1 mm². It has n_e = 10²¹ m⁻³ and μ_e = 0.125 m² V⁻¹ s⁻¹. Neglecting holes, its resistance is (a) 100 Ω (b) 1000 Ω (c) 10 Ω (d) 10⁴ Ω

25. Pure silicon has n_i = 1.5 × 10¹⁶ m⁻³, μ_e = 0.135 and μ_h = 0.048 m² V⁻¹ s⁻¹. It is doped with donors at 1.5 × 10²² m⁻³. The ratio of conductivity after doping to before doping is about (a) 1.0 × 10⁶ (b) 2.7 × 10⁵ (c) 1.35 × 10⁶ (d) 7.4 × 10⁵

26. Silicon (n_i = 1.5 × 10¹⁶ m⁻³) contains 5 × 10²² m⁻³ arsenic atoms and 3 × 10²² m⁻³ gallium atoms. The crystal is (a) n-type, with about 1.1 × 10¹⁰ holes per m³ (b) p-type, with about 1.1 × 10¹⁰ electrons per m³ (c) n-type, with about 4.5 × 10⁹ holes per m³ (d) intrinsic, since dopants cancel

27. Carbon (diamond), silicon and germanium all have four valence electrons. Diamond is an insulator because (a) it has no valence electrons free at 0 K (b) its band gap is much larger than that of Si or Ge (c) its bands overlap (d) its atoms are not covalently bonded

28. Light of wavelength 500 nm falls on pure silicon (E_g = 1.1 eV). The energy left over after an electron crosses the gap is about (a) 2.48 eV (b) 1.10 eV (c) 1.38 eV (d) 3.58 eV

29. Assertion (A): The resistivity of a semiconductor decreases as its temperature rises. Reason (R): With rising temperature, the number of charge carriers increases much faster than their mobility falls. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: In an n-type semiconductor, each donor atom that has given up its electron becomes a fixed positive ion. Statement II: An n-type semiconductor has more electrons than holes, so it carries a net negative charge. (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1dInsulators have E_g above about 3 eV.
2bAt 0 K no bonds break, so no free carriers.
3cPhosphorus is pentavalent, a donor.
4aAcceptors create holes, the majority in p-type.
5bFree electrons are balanced by fixed positive donor ions.
6dCarrier number rises sharply with temperature.
7aMetals have overlapping or partly filled bands.
8cDonor level sits just below the CB.
9dMass action law: n_e n_h = n_i².
10aGe is a single element; the rest are compounds.
11bn_e = (1.5 × 10¹⁶)² / (3 × 10²¹) = 7.5 × 10¹⁰.
12cλ = 1240/0.7 nm ≈ 1771 nm.
13aσ = 10¹⁹ × 1.6 × 10⁻¹⁹ × 0.60 = 0.96 S/m.
14dσ = 1200 S/m, so ρ = 8.3 × 10⁻⁴ Ω m.
15bI_e/I_h = (n_e μ_e)/(n_h μ_h) = 4 × 3 = 12.
16cn_h = n_i²/N_D, so doubling N_D halves n_h.
17aN_D = 10²³, so n_h = 2.25 × 10³² / 10²³.
18dAcceptor level lies just above the VB.
19bv_d = μE = 0.12 × 500 = 60 m/s.
20c9n_h² = n_i², so n_h = n_i/3 = 2 × 10¹⁷.
21aMetals conduct by free electrons, not holes.
22dThreshold is 1240/1.1 ≈ 1127 nm; 1300 nm is longer.
23cn_i = 1/(ρ e (μ_e + μ_h)) = 1/(0.5 × 1.6 × 10⁻¹⁹ × 0.56) ≈ 2.2 × 10¹⁹.
24bσ = 20 S/m; R = L/(σA) = 0.02/(20 × 10⁻⁶) = 1000 Ω.
25d(1.5 × 10²² × 0.135)/(1.5 × 10¹⁶ × 0.183) ≈ 7.4 × 10⁵.
26aNet n_e = 2 × 10²², so n_h = 2.25 × 10³² / 2 × 10²² ≈ 1.1 × 10¹⁰.
27bDiamond's gap is about 5.4 eV against 1.1 and 0.7 eV.
28c1240/500 = 2.48 eV; 2.48 − 1.10 = 1.38 eV.
29aCarrier growth outweighs mobility fall, which is why ρ falls.
30cIons are positive but the crystal stays neutral overall.

Chapter 1 revision sheet

One-page summary

  • Solids are sorted by band gap E_g = E_c − E_v: conductor (bands overlap), semiconductor (below about 3 eV), insulator (above about 3 eV).

  • Valence band: highest band filled at 0 K. Conduction band: next band, empty at 0 K. Between them: no allowed states.

  • Si 1.1 eV, Ge 0.7 eV, diamond about 5.4 eV.

  • A pure (intrinsic) semiconductor has n_e = n_h = n_i. At 0 K it behaves as an insulator.

  • A hole is a missing electron in a bond. It acts as a charge +e and moves along the field.

  • Total current I = I_e + I_h; both add because opposite charges move in opposite directions.

  • n-type: group 15 donor (P, As, Sb), donor level just below the conduction band, electrons are majority carriers.

  • p-type: group 13 acceptor (B, Al, Ga, In), acceptor level just above the valence band, holes are majority carriers.

  • Doped crystals stay electrically neutral; ionised donors and acceptors balance the free charges.

  • Mass action law: n_e n_h = n_i² at a fixed temperature. Heavy donor doping: n_e ≈ N_D and n_h ≈ n_i²/N_D.

  • Mobility μ = v_d/E, unit m² V⁻¹ s⁻¹. In Si, μ_e is larger than μ_h.

  • Conductivity σ = e(n_e μ_e + n_h μ_h); resistivity ρ = 1/σ.

  • In an intrinsic sample I_e/I_h = μ_e/μ_h, so electrons carry more current.

  • Raising temperature frees more pairs, so a semiconductor's resistivity falls; a metal's rises.

  • Light can create a pair only if its photon energy is at least E_g: λ_max (nm) = 1240/E_g (eV).

Must-remember table

QuantityFormula or valueUnit
Band gapE_g = E_c − E_veV
Si, Ge, diamond gaps1.1, 0.7, about 5.4eV
Intrinsic carriersn_e = n_h = n_im⁻³
Mass action lawn_e n_h = n_i²m⁻⁶
Mobilityμ = v_d/Em² V⁻¹ s⁻¹
Conductivityσ = e(n_e μ_e + n_h μ_h)S m⁻¹ (Ω⁻¹ m⁻¹)
Current densityJ = σEA m⁻²
Cut-off wavelengthλ_max = 1240/E_gnm (E_g in eV)

Memory aids

  • "PAS the electron": P (phosphorus), As (arsenic), Sb (antimony) pass on a spare electron, so they make n-type.

  • "BAGI owes one": B (boron), Al (aluminium), Ga (gallium), In (indium) are one electron short, so they make p-type.

  • n for Negative, p for Positive carriers: the letter names the majority carrier's sign, never the net charge of the crystal (which is zero).

  • Seesaw rule: n_e n_h is fixed; push one carrier up by doping and the other goes down by the same factor.

  • "Hot chips conduct": heat a semiconductor and its resistance drops; heat a metal wire and its resistance rises.

Concept connections

  • Drift velocity, current density and resistivity come from Physics Book 12: Current Electricity.

  • Photon energy E = hc/λ and the 1240 eV nm shortcut come from Physics Book 17: Dual Nature of Matter and Radiation.

  • Energy levels and why electrons occupy bands link to Physics Book 18: Atoms and Nuclei and Chemistry Book 2: Atomic Structure.

Practice MCQs: Chapter 1, Level 4 (new NEET pattern)

31. Match List I (material) with List II (band gap at room temperature).

  • List I: A. Silicon · B. Germanium · C. Diamond · D. Copper

  • List II: i. about 5.4 eV · ii. 1.1 eV · iii. zero (bands overlap) · iv. 0.7 eV

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-ii, B-iv, C-i, D-iii (d) A-i, B-iv, C-ii, D-iii

32. Match List I (quantity) with List II (SI unit).

  • List I: A. Mobility · B. Conductivity · C. Current density · D. Resistivity

  • List II: i. Ω⁻¹ m⁻¹ · ii. m² V⁻¹ s⁻¹ · iii. Ω m · iv. A m⁻²

(a) A-ii, B-i, C-iv, D-iii (b) A-ii, B-iii, C-iv, D-i (c) A-iv, B-i, C-ii, D-iii (d) A-i, B-ii, C-iv, D-iii

33. Match List I with List II.

  • List I: A. Pentavalent impurity in Si · B. Trivalent impurity in Si · C. Pure Si at 0 K · D. Pure Si at 300 K

  • List II: i. behaves as an insulator · ii. n_e = n_h, both non-zero · iii. acceptor, creates holes · iv. donor, gives free electrons

(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-ii, D-i (c) A-i, B-iii, C-iv, D-ii (d) A-iv, B-iii, C-i, D-ii

34. Match List I (energy level or band) with List II (description).

  • List I: A. Valence band · B. Conduction band · C. Forbidden gap · D. Donor level

  • List II: i. a few hundredths of an eV below the conduction band · ii. highest band filled at 0 K · iii. lowest band empty at 0 K · iv. no allowed electron states

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-iii, C-ii, D-i

35. How many of the following statements are correct?

  • A. An n-type semiconductor carries a net negative charge.

  • B. In p-type silicon, holes are the majority carriers.

  • C. Adding a few parts per million of dopant raises the conductivity of silicon many times.

  • D. Germanium has a larger band gap than silicon.

(a) one (b) two (c) three (d) four

36. Choose the correct set of statements.

  • A. The resistivity of a semiconductor decreases as temperature rises.

  • B. The band gap of silicon increases sharply as it is heated.

  • C. The intrinsic carrier density n_i increases with temperature.

  • D. The resistivity of copper decreases as temperature rises.

(a) A and B only (b) B and D only (c) A, C and D only (d) A and C only

37. Silicon with n_i = 1.5 × 10¹⁶ m⁻³ is doped with donors, N_D = 1.5 × 10²² m⁻³. Choose the correct set of statements.

  • A. n_e ≈ 1.5 × 10²² m⁻³

  • B. n_h ≈ 1.5 × 10¹⁰ m⁻³

  • C. n_e n_h = 2.25 × 10³² m⁻⁶

  • D. The sample is p-type.

(a) A, B and C only (b) A and B only (c) B, C and D only (d) A, B, C and D

38. Choose the correct set of statements.

  • A. A hole behaves like a positive charge of magnitude e.

  • B. Holes drift in the direction of the applied electric field.

  • C. In silicon, electron mobility is larger than hole mobility.

  • D. In an intrinsic semiconductor, the electron current equals the hole current.

(a) A and D only (b) B and C only (c) A, B and C only (d) A, B, C and D

39. A table lists four solids and their band gaps: P (bands overlap), Q (1.1 eV), R (5.4 eV), S (0.7 eV). Their room-temperature conductivity in increasing order is

(a) P < S < Q < R (b) R < Q < S < P (c) R < S < Q < P (d) Q < R < S < P

40. A graph of resistivity (y-axis) against temperature (x-axis) shows two curves. Curve X rises slowly and almost linearly. Curve Y starts high and falls steeply as temperature increases. The materials are most likely

(a) X: silicon, Y: copper (b) X and Y: both semiconductors (c) X: diamond, Y: copper (d) X: copper, Y: silicon

41. Three samples of the same semiconductor (n_i = 1.5 × 10¹⁶ m⁻³) have these carrier densities (m⁻³):

Samplen_en_h
11 × 10²⁰2.25 × 10¹²
21.5 × 10¹⁶1.5 × 10¹⁶
34.5 × 10⁹5 × 10²²

The samples are

(a) 1: n-type, 2: intrinsic, 3: p-type (b) 1: p-type, 2: intrinsic, 3: n-type (c) 1: n-type, 2: p-type, 3: intrinsic (d) all three n-type

Case for Q42–43. A lab in Pune has a silicon wafer with n_i = 1.0 × 10¹⁶ m⁻³ at 300 K. They dope it with boron to N_A = 5 × 10²¹ m⁻³. Take μ_e = 0.135 m² V⁻¹ s⁻¹, μ_h = 0.048 m² V⁻¹ s⁻¹ and e = 1.6 × 10⁻¹⁹ C.

42. The electron density in the doped wafer is about

(a) 5 × 10²¹ m⁻³ (b) 1 × 10¹⁶ m⁻³ (c) 2 × 10¹⁰ m⁻³ (d) 2 × 10⁵ m⁻³

43. The conductivity of the doped wafer is about

(a) 3.84 S m⁻¹ (b) 38.4 S m⁻¹ (c) 108 S m⁻¹ (d) 0.384 S m⁻¹

44. In intrinsic silicon, μ_e = 0.135 m² V⁻¹ s⁻¹ and μ_h = 0.048 m² V⁻¹ s⁻¹. The fraction of the total current carried by electrons is about

(a) 26% (b) 50% (c) 64% (d) 74%

45. Light of wavelength 1500 nm falls on a silicon slab (E_g = 1.1 eV) and a germanium slab (E_g = 0.7 eV). Electron-hole pairs are created in

(a) germanium only (b) silicon only (c) both (d) neither

Level 4 answer key

QAnsReason
31cSi 1.1 eV, Ge 0.7 eV, diamond about 5.4 eV, copper bands overlap
32aμ = v_d/E gives m² V⁻¹ s⁻¹; σ in Ω⁻¹ m⁻¹; J in A m⁻²; ρ in Ω m
33dGroup 15 donates, group 13 accepts; pure Si is an insulator at 0 K and has equal carriers at 300 K
34bVB filled and CB empty at 0 K; the gap has no states; donor level sits just below CB
35bB and C true; doped crystals are neutral (A false); Ge gap 0.7 eV is smaller than Si's 1.1 eV (D false)
36dMore pairs at higher T, so ρ falls and n_i rises; gap changes only slightly; metal ρ rises
37an_e ≈ N_D; n_h = (1.5 × 10¹⁶)²/1.5 × 10²² = 1.5 × 10¹⁰; donors make it n-type
38cI_e/I_h = μ_e/μ_h, so the two currents are not equal (D false)
39bLarger gap, fewer carriers: diamond < Si < Ge < metal
40dMetal resistivity rises slowly with T; a semiconductor's falls steeply
41aAll products equal n_i² = 2.25 × 10³²; more electrons means n-type, more holes p-type
42cn_e = n_i²/N_A = 10³²/(5 × 10²¹) = 2 × 10¹⁰ m⁻³
43bσ ≈ N_A e μ_h = 5 × 10²¹ × 1.6 × 10⁻¹⁹ × 0.048 = 38.4 S m⁻¹; (c) wrongly uses μ_e
44dn_e = n_h, so fraction = μ_e/(μ_e + μ_h) = 0.135/0.183 ≈ 0.74
45aE = 1240/1500 ≈ 0.83 eV: above 0.7 eV but below 1.1 eV
27 min left
‹
›