Chapter 2: The p-n Junction
What you will learn
How diffusion and drift build a depletion layer and a barrier potential at a p-n junction.
What forward bias and reverse bias do to the barrier and the depletion width.
The shape of the diode I-V curve, with knee voltage and reverse saturation current.
How to find dynamic resistance from a curve or data.
How to solve circuits with ideal and practical (0.7 V) diodes.
2.1 Forming the junction
A p-n junction is one crystal with p-type doping on one side and n-type on the other. It is made in one piece, for example by diffusing acceptors into part of an n-type wafer. Two separate pieces pressed together do not work, because the surface roughness breaks the crystal.
At the moment the junction forms, two things happen.
Diffusion. The n side has many electrons and the p side has many holes. Like the smell of chai spreading through a house, carriers move from where they are crowded to where they are scarce.
Electrons diffuse from n to p. Holes diffuse from p to n.
This flow is the diffusion current. Its conventional direction is p to n.
Ions left behind. An electron leaving the n side uncovers a fixed positive donor ion. A hole leaving the p side uncovers a fixed negative acceptor ion. Crossing carriers also recombine near the junction.
So a thin layer near the junction loses its free carriers. It holds only immobile ions:
positive ions on the n side,
negative ions on the p side.
This layer is the depletion region. It is typically about one micrometre (10⁻⁶ m) wide.
Drift. The ion layers create an electric field pointing from n to p (from + ions to − ions). This field pushes minority carriers across: electrons from p to n and holes from n to p. This is the drift current, opposite in direction to the diffusion current.
Equilibrium. Diffusion widens the layer. The growing field pushes back. Equilibrium comes when diffusion current equals drift current. The net current through an unbiased junction is then zero. Both currents still exist; they just cancel.
2.2 Barrier potential
The field in the depletion layer means a potential difference across it. The n side is at a higher potential than the p side. This difference is the barrier potential V₀.
Silicon: V₀ ≈ 0.7 V
Germanium: V₀ ≈ 0.3 V
V₀ depends on the semiconductor, the doping and the temperature. An electron moving from n to p must climb an energy hill of eV₀. A hole moving from p to n faces the same hill.
You cannot measure V₀ by placing a voltmeter across an unbiased diode. The contact potentials at the metal leads cancel it.

The depletion region holds negative acceptor ions on the p side and positive donor ions on the n side, so the field points from n to p and the n side sits higher in potential by V₀.
The average field across a depletion layer of width d is:
Worked example 2.1: A silicon junction has barrier potential 0.7 V and depletion width 0.5 μm. Find the average electric field in the depletion layer.
Solution:
That is a very strong field from just 0.7 V, because the layer is so thin.
Worked example 2.2: The barrier potential of a junction is 0.6 V. An electron from the n side reaches the depletion layer with kinetic energy 0.9 eV. What is its kinetic energy when it reaches the p side?
Solution: Moving from n to p, the electron climbs an energy hill of e × 0.6 V = 0.6 eV. So KE on the p side = 0.9 − 0.6 = 0.3 eV. An electron with less than 0.6 eV would be turned back.
2.3 Forward bias
Connect the p side to the positive terminal of a battery and the n side to the negative terminal. This is forward bias.
The applied voltage V opposes the built-in barrier.
The barrier drops to V₀ − V.
The depletion layer becomes narrower.
Majority carriers now cross easily: holes from p to n, electrons from n to p.
Once across, they become minority carriers on the other side. This is called minority carrier injection.
The current is mainly diffusion current. For V below about V₀, the current is very small. Once V nears V₀, the current rises very steeply. The voltage at which this sharp rise begins is the knee voltage or threshold voltage (about 0.7 V for Si, 0.3 V for Ge). The forward current is in milliamperes.
2.4 Reverse bias
Connect the p side to the negative terminal and the n side to the positive terminal. This is reverse bias.
The applied voltage adds to the barrier, which rises to V₀ + V.
The depletion layer becomes wider.
Majority carriers cannot cross. Diffusion current falls almost to zero.
Only the small drift current of minority carriers flows.
This current is the reverse saturation current I₀. It is in microamperes (Ge) or nanoamperes (Si). It barely changes with voltage, because it is limited by how many minority carriers heat produces, not by the field. Like a busy road with very few vehicles: raising the speed limit does not increase traffic much.
I₀ rises with temperature, since more bonds break.
At a large enough reverse voltage, the current suddenly shoots up. This is breakdown. An ordinary diode can be destroyed here. A Zener diode is built to work in this region (Chapter 5).
| Feature | Forward bias | Reverse bias |
|---|---|---|
| Connection | p to +, n to − | p to −, n to + |
| Barrier height | V₀ − V (lowered) | V₀ + V (raised) |
| Depletion width | Decreases | Increases |
| Main current | Diffusion of majority carriers | Drift of minority carriers |
| Size of current | mA, rises steeply after knee | μA or nA, nearly constant |
| Resistance | Low (few to tens of ohms) | Very high (megaohms and above) |
2.5 The I-V characteristic
We measure diode current I for different applied voltages V. A milliammeter is used in forward bias and a microammeter in reverse bias. The resulting curve is the I-V characteristic.

Forward current stays small until the knee and then shoots up in mA; reverse current stays a tiny, flat I₀ until breakdown (note the different current scales).
Read the curve in four parts:
Forward, below knee: tiny current.
Forward, above knee: current rises steeply, almost along a straight line.
Reverse, below breakdown: tiny, almost flat current I₀.
Reverse, at breakdown: current rises sharply at nearly constant voltage.
The curve is not a straight line through the origin. So a diode is a non-ohmic device. It conducts well in one direction only, which makes it useful as a one-way valve for current, like the valve on a pressure cooker that lets steam out but not air in.
2.6 Dynamic resistance
Since the curve is not straight, V/I changes from point to point. We use the dynamic (or a.c.) resistance, the inverse slope of the curve at a point:
In forward bias above the knee, r_d is small. In reverse bias, r_d is huge.
Worked example 2.3: For a diode, the current is 8 mA at 0.70 V and 18 mA at 0.75 V. Find its dynamic resistance in this range.
Solution:
Worked example 2.4: In reverse bias, the same diode carries 1.0 μA at −10 V and 1.25 μA at −20 V. Find the reverse dynamic resistance.
Solution:
The reverse resistance is about 10⁷ times the forward value.
2.7 Solving diode circuits
Follow three steps:
Decide the bias of each diode. Assume a diode conducts and check that its current flows from p to n. If not, treat it as off.
Replace a conducting diode with a short (ideal) or a 0.7 V drop (practical Si). Replace an off diode with an open switch.
Solve with Ohm's law and Kirchhoff's rules.
When two forward-biased diodes with different knee voltages are in parallel, the one with the lower knee turns on first and holds the voltage at its own knee. The other stays off.
Worked example 2.5: A 5 V battery, a silicon diode (0.7 V) and a 215 Ω resistor are in series, with the diode forward biased. Find the current.
Solution:
Worked example 2.6: A 12 V battery feeds two parallel branches. Branch A has an ideal diode (forward biased) in series with 4 kΩ. Branch B has an ideal diode (reverse biased) in series with 2 kΩ. Find the current drawn from the battery.
Solution: Branch B is open. Only branch A conducts: I = 12/4000 = 3 mA.
Worked example 2.7: Two silicon diodes (0.7 V each) are in series, both forward biased, with a 3 V source and an 80 Ω resistor. Find the current and the power in each diode.
Solution:
Power in each diode = 0.7 × 0.02 = 0.014 W = 14 mW.
Worked example 2.8 (NEET-hard): A diode has a constant forward drop of 0.5 V and can safely carry at most 0.5 W. It is used with a 1.5 V battery in series with a resistor R. Find the least R that keeps the diode safe.
Solution: Maximum current I = P/V = 0.5/0.5 = 1 A. The resistor takes the rest of the voltage: 1.5 − 0.5 = 1.0 V. So R = 1.0/1 = 1 Ω. Any smaller R would push more than 1 A through the diode.
Quick revision
Diffusion builds the depletion layer; drift opposes it; at equilibrium they cancel.
Depletion layer holds only fixed ions: + on n side, − on p side; field points n to p.
V₀ ≈ 0.7 V (Si), 0.3 V (Ge); E ≈ V₀/d.
Forward bias: barrier V₀ − V, layer narrows, current in mA after the knee.
Reverse bias: barrier V₀ + V, layer widens, tiny current I₀ set by minority carriers.
I₀ rises with temperature but hardly with voltage (till breakdown).
Dynamic resistance r_d = ΔV/ΔI; small forward, huge reverse.
NEET traps
Saying the depletion layer contains free electrons and holes. It contains only fixed ions.
Writing the field direction as p to n. It points from the positive ions (n side) to the negative ions (p side).
Thinking zero net current means no current at all. Diffusion and drift both flow; they cancel.
Forgetting the 0.7 V drop when a question says "silicon diode" and gives no other hint.
Taking reverse current as proportional to reverse voltage. It stays nearly constant till breakdown.
Using V/I instead of ΔV/ΔI for dynamic resistance.
Practice MCQs: Chapter 2
Level 1: Concept check
1. The depletion region of a p-n junction contains (a) only free electrons (b) only free holes (c) immobile ions (d) an excess of both free carriers
2. When a p-n junction is forward biased, the width of the depletion layer (a) decreases (b) increases (c) stays the same (d) first increases then decreases
3. The barrier potential of a silicon junction is about (a) 0.07 V (b) 0.7 V (c) 3 V (d) 7 V
4. In reverse bias, the p side of the junction is connected to (a) the positive terminal (b) the earth only (c) nothing (d) the negative terminal
5. The reverse saturation current of a diode is due to (a) majority carriers (b) minority carriers (c) donor ions (d) acceptor ions
6. In an unbiased p-n junction at equilibrium (a) only diffusion current flows (b) only drift current flows (c) diffusion and drift currents are equal and opposite (d) no carriers cross the junction at all
7. The electric field in the depletion layer points (a) from p side to n side (b) parallel to the junction (c) in no fixed direction (d) from n side to p side
8. The electric field in the depletion layer is produced by (a) the fixed ions on either side (b) the battery only (c) the free electrons only (d) the metal contacts
9. The knee voltage of a diode is the voltage (a) at which reverse breakdown starts (b) at which the depletion layer vanishes in reverse bias (c) beyond which forward current rises steeply (d) at which current is zero
10. Compared with its reverse resistance, the forward resistance of a diode is (a) about equal (b) much smaller (c) much larger (d) always zero
Level 2: NEET standard
11. A junction has barrier potential 0.6 V and depletion width 0.4 μm. The average field in the depletion layer is (a) 2.4 × 10⁵ V m⁻¹ (b) 6.7 × 10⁵ V m⁻¹ (c) 1.5 × 10⁵ V m⁻¹ (d) 1.5 × 10⁶ V m⁻¹
12. A diode carries 5 mA at 0.65 V and 15 mA at 0.70 V. Its dynamic resistance in this range is (a) 50 Ω (b) 5 Ω (c) 0.5 Ω (d) 47 Ω
13. A silicon diode (0.7 V) is forward biased by a 3.7 V source through a 150 Ω resistor. The current is (a) 20 mA (b) 24.7 mA (c) 4.7 mA (d) 2 mA
14. In reverse bias, a diode carries 0.5 μA at −5 V and 0.6 μA at −15 V. Its reverse dynamic resistance is (a) 10⁷ Ω (b) 2.5 × 10⁷ Ω (c) 10⁸ Ω (d) 10⁹ Ω
15. As the temperature of a diode rises, its reverse saturation current (a) falls to zero (b) stays exactly constant (c) decreases slowly (d) increases
16. A 10 V battery, a 1 kΩ resistor and an ideal diode are in series, with the diode reverse biased. The current is (a) 10 mA (b) zero (c) 5 mA (d) 1 mA
17. A silicon junction (V₀ = 0.7 V) is forward biased with 0.4 V. The effective barrier height is (a) 0.3 V (b) 0.7 V (c) 1.1 V (d) 0.4 V
18. A germanium junction (V₀ = 0.3 V) is reverse biased with 5 V. The barrier height becomes (a) 4.7 V (b) 0.3 V (c) 5.3 V (d) 5.0 V
19. The barrier potential of a junction is 0.7 V. An electron from the n side reaches the depletion layer with kinetic energy 1.0 eV. Its kinetic energy on reaching the p side is (a) 1.7 eV (b) 1.0 eV (c) zero, it is turned back (d) 0.3 eV
20. A 6 V battery feeds two parallel branches: an ideal diode forward biased with 3 kΩ, and an ideal diode reverse biased with 1.5 kΩ. The battery current is (a) 6 mA (b) 2 mA (c) 4 mA (d) zero
21. A diode has a constant forward drop of 0.6 V and a maximum power rating of 0.6 W. With a 3 V source, the least series resistance needed is (a) 2.4 Ω (b) 3.0 Ω (c) 5.0 Ω (d) 0.6 Ω
22. Below breakdown, the reverse current of a diode (a) rises linearly with reverse voltage (b) falls as reverse voltage rises (c) stays nearly constant as reverse voltage rises (d) is zero at all temperatures
Level 3: Challenge
23. Two silicon diodes (0.7 V each) are in series, both forward biased, with a 5 V source and a 180 Ω resistor. The current is (a) 27.8 mA (b) 20 mA (c) 24 mA (d) 16 mA
24. A silicon diode (0.7 V) and a germanium diode (0.3 V) are joined in parallel, both forward biased. The pair is fed from 5 V through a 470 Ω resistor. The current through the silicon diode is (a) 10 mA (b) 9.1 mA (c) 5 mA (d) zero
25. A 9 V battery is in series with a 1 kΩ resistor and a 2 kΩ resistor. An ideal diode is connected across the 2 kΩ resistor so that it is forward biased. The battery current is (a) 9 mA (b) 3 mA (c) 4.5 mA (d) zero
26. A junction (V₀ = 0.7 V) is reverse biased with 9.3 V. The depletion width becomes 2 μm. The average field in the depletion layer is (a) 4.65 × 10⁶ V m⁻¹ (b) 3.5 × 10⁵ V m⁻¹ (c) 5 × 10⁶ V m⁻¹ (d) 5 × 10⁵ V m⁻¹
27. A silicon diode (0.7 V) is forward biased from a 6 V source through a resistor R. The diode dissipates 14 mW. The value of R is (a) 300 Ω (b) 350 Ω (c) 230 Ω (d) 265 Ω
28. The reverse current of a diode stays nearly constant as reverse voltage rises because (a) the depletion layer stops widening (b) it is limited by the number of minority carriers produced by heat (c) majority carriers are all used up (d) the barrier potential falls
29. Assertion (A): The depletion layer of a p-n junction becomes wider under reverse bias. Reason (R): Reverse bias pulls majority carriers away from the junction, uncovering more fixed ions. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: In forward bias, the diode current is mainly due to diffusion of majority carriers. Statement II: In an unbiased p-n junction, the drift current is zero. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | c | Free carriers are swept out; only fixed ions remain. |
| 2 | a | Forward voltage opposes the barrier and narrows the layer. |
| 3 | b | Si barrier is about 0.7 V. |
| 4 | d | Reverse bias: p to negative, n to positive. |
| 5 | b | Only minority carriers drift across in reverse bias. |
| 6 | c | At equilibrium the two currents cancel. |
| 7 | d | Field runs from positive ions (n side) to negative ions (p side). |
| 8 | a | Uncovered donor and acceptor ions set up the field. |
| 9 | c | Knee is where forward current starts rising steeply. |
| 10 | b | Forward resistance is ohms; reverse is megaohms or more. |
| 11 | d | E = 0.6/(0.4 × 10⁻⁶) = 1.5 × 10⁶ V/m. |
| 12 | b | r_d = 0.05 V / 0.010 A = 5 Ω. |
| 13 | a | I = (3.7 − 0.7)/150 = 0.02 A. |
| 14 | c | r_d = 10 V / 0.1 μA = 10⁸ Ω. |
| 15 | d | More bonds break, so more minority carriers. |
| 16 | b | A reverse-biased ideal diode is an open circuit. |
| 17 | a | Barrier = 0.7 − 0.4 = 0.3 V. |
| 18 | c | Barrier = 0.3 + 5 = 5.3 V. |
| 19 | d | KE = 1.0 − 0.7 = 0.3 eV. |
| 20 | b | Only the forward branch conducts: 6/3000 = 2 mA. |
| 21 | a | I_max = 0.6/0.6 = 1 A; R = (3 − 0.6)/1 = 2.4 Ω. |
| 22 | c | Reverse current is set by minority carrier supply. |
| 23 | b | I = (5 − 1.4)/180 = 0.02 A. |
| 24 | d | Ge turns on first and holds 0.3 V, below the Si knee. |
| 25 | a | The diode shorts the 2 kΩ resistor: I = 9/1000. |
| 26 | c | Total barrier 10 V; E = 10/(2 × 10⁻⁶) = 5 × 10⁶ V/m. |
| 27 | d | I = 0.014/0.7 = 20 mA; R = 5.3/0.02 = 265 Ω. |
| 28 | b | Minority carrier supply, set by temperature, limits the current. |
| 29 | a | Uncovering more ions is exactly why the layer widens. |
| 30 | c | Drift current is not zero; it equals the diffusion current. |
Chapter 2 revision sheet
One-page summary
A p-n junction is one crystal with a p region and an n region, not two pieces pressed together.
At contact, electrons diffuse n → p and holes p → n because of the concentration difference (diffusion current).
They leave behind immobile ions: positive donor ions on the n side, negative acceptor ions on the p side.
This thin layer with no free carriers is the depletion region, usually a fraction of a micrometre wide.
The ions set up a field from n to p. It drives minority carriers across (drift current).
At equilibrium diffusion = drift, and the net current is zero.
Barrier potential V₀: about 0.7 V (Si), 0.3 V (Ge). It cannot be read with a voltmeter.
Average field in the depletion region: E ≈ V/d.
Forward bias (p to +, n to −): barrier falls to V₀ − V, depletion region narrows, large majority current (mA) after the knee.
Reverse bias (p to −, n to +): barrier rises to V₀ + V, depletion region widens, tiny minority current (µA or nA) that is nearly independent of voltage.
Reverse current rises with temperature because heat makes more minority carriers.
At breakdown voltage the reverse current shoots up; an ordinary diode can burn out there.
The I-V curve is non-linear, so the diode does not obey Ohm's law.
Dynamic resistance r_d = ΔV/ΔI: a few ohms in forward bias, megaohms in reverse bias.
Circuit method: decide each diode's bias, replace a forward diode by 0.7 V (or 0 V if ideal), a reverse one by an open switch, then use Ohm's law.
Must-remember table
| Quantity | Formula or value | Unit |
|---|---|---|
| Barrier potential | Si 0.7, Ge 0.3 | V |
| Barrier in forward bias | V₀ − V | V |
| Barrier in reverse bias | V₀ + V | V |
| Average junction field | E ≈ V/d | V m⁻¹ |
| Dynamic resistance | r_d = ΔV/ΔI | Ω |
| Series diode circuit current | I = (E − n × 0.7)/R for n Si diodes | A |
| Power in a diode | P = V_D × I | W |
| Typical currents | forward mA, reverse µA (Ge) or nA (Si) | A |
Memory aids
"P to P is Pass": positive terminal to p side means forward bias and the diode passes current.
"Forward Flattens, Reverse Raises": forward bias flattens the barrier hill; reverse bias raises it and widens the depletion region.
"DiMa, DrMi": Diffusion is by Majority carriers, Drift is by Minority carriers.
"Light doping, Long depletion": a lightly doped junction has a wider depletion region.
"Hot leaks more": reverse (leakage) current rises with temperature.
Concept connections
Electric field from a potential difference (E = V/d) and the energy eV come from Physics Book 11: Electrostatics.
Series circuits, Ohm's law and power P = VI are from Physics Book 12: Current Electricity.
Reading non-linear I-V curves and finding a slope is practised in Physics Book 20: Experimental Skills.
Practice MCQs: Chapter 2, Level 4 (new NEET pattern)
31. Match List I with List II.
List I: A. Diffusion current · B. Drift current · C. Depletion region · D. Barrier potential of Si
List II: i. caused by the junction field acting on minority carriers · ii. caused by a difference in carrier concentration · iii. about 0.7 V · iv. contains immobile ions and no free carriers
(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-i, C-iv, D-iii (c) A-ii, B-i, C-iii, D-iv (d) A-iv, B-i, C-ii, D-iii
32. Match List I (condition of a junction) with List II (what happens).
List I: A. Forward bias · B. Reverse bias below breakdown · C. No bias · D. Reverse bias at breakdown
List II: i. diffusion balances drift, net current zero · ii. barrier lowered, depletion region narrows, large current · iii. reverse current rises suddenly · iv. barrier raised, depletion region widens, tiny current
(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-iii, D-i (c) A-i, B-iv, C-ii, D-iii (d) A-ii, B-iv, C-i, D-iii
33. Match each pair of readings (List I) with the dynamic resistance (List II).
List I: A. ΔV = 0.1 V, ΔI = 20 mA · B. ΔV = 0.2 V, ΔI = 10 mA · C. ΔV = 10 V, ΔI = 1 µA · D. ΔV = 0.05 V, ΔI = 25 mA
List II: i. 2 Ω · ii. 5 Ω · iii. 20 Ω · iv. 10 MΩ
(a) A-ii, B-iii, C-iv, D-i (b) A-iii, B-ii, C-iv, D-i (c) A-ii, B-iii, C-i, D-iv (d) A-i, B-iii, C-iv, D-ii
34. A silicon diode (0.7 V drop when on) is in series with a battery and a resistor. Match List I (circuit) with List II (current).
List I: A. 5 V, 1 kΩ, forward · B. 10.7 V, 2 kΩ, forward · C. 2.7 V, 1 kΩ, forward · D. 5 V, 1 kΩ, reverse
List II: i. 2 mA · ii. 4.3 mA · iii. 5 mA · iv. nearly zero
(a) A-iii, B-ii, C-i, D-iv (b) A-ii, B-i, C-iii, D-iv (c) A-ii, B-iii, C-i, D-iv (d) A-iv, B-iii, C-i, D-ii
35. How many of the following statements are correct?
A. In forward bias, the current is mainly due to diffusion of majority carriers.
B. Below breakdown, the reverse saturation current depends strongly on the reverse voltage.
C. The reverse current of a diode increases with temperature.
D. A lightly doped junction has a wider depletion region than a heavily doped one.
(a) one (b) two (c) three (d) four
36. Choose the correct set of statements.
A. The electric field in the depletion region points from the n side to the p side.
B. The barrier potential of a diode can be measured by connecting a voltmeter across it.
C. A germanium diode has a lower knee voltage than a silicon diode.
D. In the depletion region, the n side holds positive immobile ions.
(a) A, C and D only (b) A and B only (c) B and C only (d) B, C and D only
37. How many of the following statements about a diode's I-V curve are correct?
A. Forward current rises sharply once the knee voltage is crossed.
B. The forward I-V curve is a straight line, so the diode obeys Ohm's law.
C. Reverse current stays very small until breakdown.
D. The dynamic resistance is the same in forward and reverse bias.
(a) one (b) two (c) three (d) four
38. A silicon junction has V₀ = 0.7 V. Choose the correct set of statements.
A. An electron moving from the n side to the p side must climb a 0.7 eV energy hill.
B. A hole moving from the p side to the n side also faces the barrier.
C. A reverse bias of 5 V makes the total barrier 5.7 V.
D. A forward bias of 0.5 V makes the total barrier 1.2 V.
(a) A and D only (b) B and C only (c) C and D only (d) A, B and C only
39. The forward I-V graphs of two diodes P and Q are drawn on the same axes. P's current starts rising sharply near 0.3 V; Q's starts rising sharply near 0.7 V. Below these voltages both currents are almost zero. P and Q are
(a) P: silicon, Q: germanium (b) both silicon (c) P: germanium, Q: silicon (d) P: Zener, Q: LED
40. Forward readings of a diode are given.
| V (V) | 0.70 | 0.72 | 0.74 |
|---|---|---|---|
| I (mA) | 5 | 10 | 20 |
The dynamic resistance between 0.72 V and 0.74 V is
(a) 2 Ω (b) 4 Ω (c) 37 Ω (d) 74 Ω
41. A 6 V battery feeds two branches in parallel. Branch 1: a silicon diode, forward biased, in series with 1 kΩ. Branch 2: a silicon diode, reverse biased, in series with 1 kΩ. The current drawn from the battery is
(a) zero (b) 2.65 mA (c) 6.0 mA (d) 5.3 mA
Case for Q42–43. Ravi builds a torch-indicator circuit: a 9 V battery, a silicon diode (0.7 V when on) and an 830 Ω resistor, all in series, with the diode forward biased.
42. The current in the circuit is
(a) 10.8 mA (b) 10 mA (c) 9.2 mA (d) zero
43. The power dissipated in the diode is
(a) 90 mW (b) 83 mW (c) 7 mW (d) 0.7 mW
44. A germanium diode (0.3 V) and a silicon diode (0.7 V), both forward biased, are in series with a 2 kΩ resistor and a 5 V battery. The current is
(a) 2.0 mA (b) 1.8 mA (c) 2.35 mA (d) 2.5 mA
45. A silicon junction (V₀ = 0.7 V) has a depletion width of 0.5 µm at zero bias. A reverse bias of 4.3 V widens it to 1.2 µm. The average field in the depletion region is now about
(a) 1.4 × 10⁶ V m⁻¹ (b) 3.6 × 10⁶ V m⁻¹ (c) 1.0 × 10⁷ V m⁻¹ (d) 4.2 × 10⁶ V m⁻¹
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | Diffusion from concentration gradient, drift from the field, depletion region holds ions, Si barrier 0.7 V |
| 32 | d | Forward lowers the barrier, reverse raises it, no bias gives zero net current, breakdown gives a sudden rise |
| 33 | a | 0.1/0.020 = 5 Ω; 0.2/0.010 = 20 Ω; 10/10⁻⁶ = 10 MΩ; 0.05/0.025 = 2 Ω |
| 34 | c | (5 − 0.7)/1 kΩ = 4.3 mA; (10.7 − 0.7)/2 kΩ = 5 mA; (2.7 − 0.7)/1 kΩ = 2 mA; reverse gives almost none |
| 35 | c | A, C, D true; saturation current hardly depends on reverse voltage (B false) |
| 36 | a | Field runs from + ions (n side) to − ions (p side); a voltmeter cannot read V₀ because contact potentials cancel it |
| 37 | b | A and C true; the curve is non-linear (B false); r_d is small forward, huge reverse (D false) |
| 38 | d | Forward bias lowers the barrier to 0.7 − 0.5 = 0.2 V, so D is false |
| 39 | c | Knee near 0.3 V is germanium, near 0.7 V is silicon |
| 40 | a | r_d = (0.74 − 0.72)/(20 − 10) mA = 0.02/0.010 = 2 Ω |
| 41 | d | Only branch 1 conducts: (6 − 0.7)/1000 = 5.3 mA |
| 42 | b | I = (9 − 0.7)/830 = 8.3/830 = 10 mA; (a) ignores the 0.7 V drop |
| 43 | c | P = 0.7 V × 10 mA = 7 mW; 83 mW goes in the resistor |
| 44 | a | I = (5 − 0.3 − 0.7)/2000 = 4/2000 = 2.0 mA |
| 45 | d | Total barrier = 0.7 + 4.3 = 5 V; E = 5/(1.2 × 10⁻⁶) ≈ 4.2 × 10⁶ V m⁻¹ |