LATEST
IBPS & BankingBy Pareeksha Editorial Team· ⏱ 11 min read

Caselet DI for Bank Mains: Tabulate, Solve and Check

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Caselet DI for Bank Mains: Tabulate, Solve and Check
On this page
  1. Where DI sits in the mains paper
  2. The method in five steps
  3. Worked set 1: a caselet
  4. Worked set 2: missing-value DI
  5. Worked set 3: setting up equations
  6. Worked set 4: a two-category overlap
  7. A time plan for a DI set
  8. Common mistakes
  9. How to prepare
  10. Frequently asked questions
  11. What is caselet DI?
  12. What is missing-value DI?
  13. Is a calculator allowed in bank mains DI?
  14. How much time should a caselet set take?
  15. What should I do if I cannot fill the table?
  16. How do I practise caselets effectively?
  17. Sources

Caselet DI looks harder than chart DI because the data is hidden in a paragraph. There is no table to read from; you have to build one. Missing-value DI is the reverse problem: the table is there, but some cells are blank and you fill them from clues before you can answer anything. Both reward the same skill, which is setting up the data cleanly before touching the questions.

This post shows how to tabulate a caselet, how to fill a missing-value table, how to turn word clues into equations, and how to plan time across a set. It has four original worked sets. Every number in them was checked with a Python script before publishing. The section details come from the current IBPS PO and SBI PO notices and their main-exam information handouts, listed under Sources; the technique itself is standard arithmetic.

Where DI sits in the mains paper

Exam (notice) Section Questions Marks Time
IBPS PO/MT Mains (CRP PO/MT-XVI) Data Analysis & Interpretation 40 60 45 minutes
SBI PO Mains (CRPD/PO/2026-27/09) Data Analysis & Interpretation 30 60 45 minutes

One detail changes how you should practise. Both main-exam information handouts (IBPS for the exam of 04.10.2026, SBI for its PO Mains) say that for Data Analysis & Interpretation, use of an in-built calculator shown on the computer screen is permitted. So mains DI is less about mental arithmetic and more about reading the case correctly and setting it up without errors. A calculator does not help if the table you built is wrong.

Clerk mains papers have a Quantitative Aptitude section rather than a separate DI section, and neither the IBPS CSA-XVI notification nor the SBI Junior Associates mains booklet mentions an on-screen calculator. Practise the mental arithmetic as well if you are writing clerk exams; the simplification and approximation guide covers that side.

The method in five steps

  1. Read the whole paragraph once without writing. Find the grand total, the categories and the time periods.
  2. Draw the empty table. Rows are usually the categories; columns are the attributes or periods. Add a "Total" row and column.
  3. Fill what is given directly, then what follows in one step (a percentage of a known total, a difference from a known value).
  4. Write equations for what is left. Use one letter per unknown and one equation per clue.
  5. Check the totals add up before answering. One wrong cell spoils every question in the set.

Write numbers, not sentences, on the rough sheet. A small grid with totals is faster to read than notes.

Worked set 1: a caselet

A bank branch opened 1,200 new accounts in the first quarter, of three kinds: savings, current and fixed deposit (FD). Savings accounts made up 55% of the total. The remaining accounts were current and FD in the ratio 4 : 5. Women opened 35% of the savings accounts and 25% of the current accounts. The number of FD accounts opened by women was 60 more than the number of current accounts opened by women.

Building the table.

  • Savings = 55% of 1,200 = 660.
  • Remaining = 1,200 − 660 = 540, split 4 : 5. Current = 540 × 4/9 = 240. FD = 540 × 5/9 = 300.
  • Women, savings = 35% of 660 = 231.
  • Women, current = 25% of 240 = 60.
  • Women, FD = 60 + 60 = 120.
  • Men = total minus women in each row.
Account Total Women Men
Savings 660 231 429
Current 240 60 180
FD 300 120 180
Total 1,200 411 789

Check: 660 + 240 + 300 = 1,200 and 411 + 789 = 1,200.

Q1. How many FD accounts were opened by men? 300 − 120 = 180.

Q2. What percentage of all accounts were opened by women? 411 / 1,200 × 100 = 34.25%.

Q3. What is the ratio of men opening savings accounts to men opening current accounts? 429 : 180. Both divide by 3: 143 : 60.

Q4. In the second quarter, total new accounts rose by 15%. Savings fell to 50% of the new total, and current and FD were equal. By what percentage did FD accounts rise from the first quarter to the second? Second-quarter total = 1,200 × 1.15 = 1,380. Savings = 690. Current = FD = (1,380 − 690)/2 = 345. FD rose from 300 to 345, an increase of 45/300 = 15%.

A follow-up an examiner might ask: current accounts rose from 240 to 345, an increase of 105/240 = 43.75%. Savings rose from 660 to 690, about 4.5%, even though its share of the total fell. That last point is a classic trap: a falling share does not mean a falling number when the total grows.

Worked set 2: missing-value DI

The table shows loan applications at five branches. Some cells are blank.

Branch Applications Approved Approval rate (%) Rejected
A 480 ? 75 ?
B ? 252 ? 108
C 400 ? ? 140
D ? ? 64 90
E 550 385 ? ?

Every row obeys two rules: Applications = Approved + Rejected, and Approval rate = Approved / Applications × 100.

Filling the table.

  • A: Approved = 75% of 480 = 360. Rejected = 480 − 360 = 120.
  • B: Applications = 252 + 108 = 360. Rate = 252/360 × 100 = 70%.
  • C: Approved = 400 − 140 = 260. Rate = 260/400 × 100 = 65%.
  • D: The rate is 64%, so rejections are 36% of applications. 36% of Applications = 90, so Applications = 90 / 0.36 = 250. Approved = 250 − 90 = 160.
  • E: Rate = 385/550 × 100 = 70%. Rejected = 550 − 385 = 165.
Branch Applications Approved Rate (%) Rejected
A 480 360 75 120
B 360 252 70 108
C 400 260 65 140
D 250 160 64 90
E 550 385 70 165
Total 2,040 1,417 623

Check: 1,417 + 623 = 2,040.

Q1. Total applications across the five branches? 2,040.

Q2. Which branch has the highest approval rate? A, at 75%.

Q3. Average number of approved loans per branch? 1,417 / 5 = 283.4.

Q4. Rejections at C and E together are what percentage of all rejections? (140 + 165) / 623 × 100 = 305/623 × 100 ≈ 48.96%, about 49%.

Q5. Next year, applications at B rise by 25% and its approval rate stays the same. How many loans will B approve? 360 × 1.25 = 450 applications; 70% of 450 = 315.

Q6. By what percentage are D's applications fewer than C's? (400 − 250)/400 × 100 = 37.5%.

The step that slows most candidates is D, where neither applications nor approvals is given. The fix is to notice that the approval rate also fixes the rejection rate (100 − 64 = 36%), and the rejected count is known. Look for the cell that, together with a rate, pins down a total.

Worked set 3: setting up equations

A customer split ₹84 lakh between two deposit schemes, X and Y. Scheme X pays 6% simple interest a year and scheme Y pays 8%. The total interest after one year was ₹5.8 lakh. How much was placed in each scheme?

Let the amounts be x and y (in ₹ lakh).

  • x + y = 84
  • 0.06x + 0.08y = 5.8

From the first equation, x = 84 − y. Substitute: 0.06(84 − y) + 0.08y = 5.8, so 5.04 + 0.02y = 5.8, giving 0.02y = 0.76 and y = 38. Then x = 46.

Check: 6% of 46 = 2.76 and 8% of 38 = 3.04. 2.76 + 3.04 = 5.8. Correct.

A faster route, once the setup is clear: if all ₹84 lakh earned 6%, interest would be ₹5.04 lakh. The extra ₹0.76 lakh comes from Y earning 2 percentage points more, so Y = 0.76 / 0.02 = 38. This is the same equation written as a shortcut; use whichever you can do without error.

Many caselets reduce to exactly this shape: two unknowns, one total and one weighted total. Spot it and the set becomes routine.

Worked set 4: a two-category overlap

In a survey of 500 customers, 300 use UPI, 240 use net banking and 60 use neither.

Customers using at least one = 500 − 60 = 440. Using both = 300 + 240 − 440 = 100.

Group Count
UPI only 300 − 100 = 200
Net banking only 240 − 100 = 140
Both 100
Neither 60
Total 500

Q1. What percentage use exactly one of the two? (200 + 140) / 500 × 100 = 68%.

Q2. Of the UPI users, what fraction also use net banking? 100/300 = one-third.

The trap here is adding 300 and 240 and forgetting that the 100 who use both are counted twice. Always find "both" first.

A time plan for a DI set

With 45 minutes for the section, the per-question time works out to about 67 seconds in a 40-question paper and 90 seconds in a 30-question paper. A caselet set of five questions therefore has roughly five and a half to seven and a half minutes. A workable split:

Step Time for a five-question set
Read the paragraph once 45 to 60 seconds
Build and check the table 90 to 120 seconds
Answer the five questions 2.5 to 4 minutes

Two rules follow from this:

  • Spend the setup time. Building the table takes a third of the set's time, but it makes each question take 30 to 45 seconds instead of a minute and a half.
  • Skip a set that will not close. If after two minutes the table still has cells you cannot fill, move on and come back. One stuck caselet can cost three other sets.

The section-wise time management guide covers how to plan the whole section, and solving DI faster has more on chart and table sets.

Common mistakes

  • Percentage of the wrong base. "35% of savings accounts" is a share of 660, not of 1,200. Underline the base in each clue.
  • Ratio applied to the wrong total. In set 1 the 4 : 5 ratio splits the remaining 540, not the full 1,200.
  • Share versus number. A falling share can hide a rising number when the total grows, as set 1 Q4 showed.
  • Counting overlaps twice. In any "both" or "neither" caselet, find the overlap first.
  • Not checking totals. A ten-second total check catches most setup errors before they spread.
  • Rounding too early. Keep exact values until the final answer; options are often close.

How to prepare

Frequently asked questions

What is caselet DI?

Caselet DI gives the data in a paragraph instead of a table or chart. You read the paragraph, build a table from it, and then answer a set of questions from that table.

What is missing-value DI?

It is a table with some cells left blank. You fill the blanks from the relations between columns (such as totals and rates) and from extra clues, and then answer the questions.

Is a calculator allowed in bank mains DI?

The IBPS PO main-exam handout for the exam of 04.10.2026 and the SBI PO Mains handout both say an in-built on-screen calculator is permitted for Data Analysis & Interpretation. Check the handout of your own exam, because the rule is stated per exam.

How much time should a caselet set take?

In a 45-minute DI section, a five-question set has roughly five and a half to seven and a half minutes, depending on the number of questions in the section. Spend about a third of it building and checking the table.

What should I do if I cannot fill the table?

Leave the set after about two minutes and return to it if time remains. A stuck setup rarely loosens under pressure, and other sets may be quicker.

How do I practise caselets effectively?

Practise the setup separately: take a caselet, build the table, check totals, and only then look at the questions. Once the setup is reliable, move to timed sets.

Sources

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.