Chapter 2 of 12 · 5 min read

Exam Strategy

This unit usually gives about 2–4 NEET questions (roughly 8–16 marks), and most of them are short numericals on motional emf, LCR circuits and transformers. Study it formula-first: learn each formula with its condition, then do many quick numericals until the answers come in under a minute.

Chapter weightage and priority

ChapterTypical NEET questionsPriorityWhy
1. Magnetic Flux and Faraday's Law0–1MediumAverage emf and induced charge q = NΔΦ/R come up often as one-step sums
2. Lenz's Law, Motional EMF and Eddy Currents0–1HighRod on rails, rotating rod and Lenz direction are favourite question setters' tools
3. Self and Mutual Inductance0–1MediumSolenoid L, energy ½LI² and back emf L di/dt are quick scoring sums
4. Alternating Current Basics0–1Mediumrms, peak and average values; reading v = V0 sin ωt
5. AC Through R, L and C0–1MediumPhase relations and XL, XC versus frequency are asked as concept checks
6. Series LCR Circuit and Resonance1–2HighImpedance, phase angle, resonance frequency and Q factor appear almost every year
7. Power in AC Circuits0–1HighPower factor, average power and wattless current are easy marks
8. AC Generator and Transformer0–1MediumTurns ratio, efficiency and generator peak emf NBAω

Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.

High-yield topics

  • Average induced emf: e = NΔΦ/Δt with B, A or θ changing; often a coil flipped through 180°, which doubles ΔΦ.

  • Induced charge: q = NΔΦ/R, and the trap that it does not depend on how fast the change happens.

  • Lenz's law direction: magnet approaching or leaving a ring, falling magnet with a < g, clockwise or anticlockwise current.

  • Motional emf: e = Bvl for a rod on rails, the force B²l²v/R, power B²l²v²/R and terminal velocity.

  • Rotating rod or disc: e = ½Bωl², including ceiling fan blades and wheel spokes in Earth's field.

  • Self inductance of a solenoid: L = μ0N²A/l, and how L scales when N, l or A change.

  • Energy in an inductor: U = ½LI² and energy density B²/2μ0.

  • rms and average values: I0/√2, 2I0/π for a half cycle, rms of square, half-wave and mixed waves.

  • Phase relations: current leads in C, lags in L, in phase in R; XL = ωL and XC = 1/ωC versus frequency graphs.

  • Series LCR: Z = √(R² + (XL − XC)²), tan φ = (XL − XC)/R, resonance f0 = 1/(2π√LC), Q factor.

  • AC power: P = Vrms Irms cos φ, cos φ = R/Z, wattless current Irms sin φ, choke coil.

  • Transformer: Vs/Vp = Ns/Np, efficiency, energy losses and their remedies, transmission loss I²R.

Question types to expect

TypeWhat it looks likeHow to approach
NumericalFind emf, current, Z, f0, power or turns ratioWrite the formula first, put SI units, then simplify with π² ≈ 10 where allowed
Conceptual"What happens to XC if f is doubled?"Use proportionality; never compute what a ratio can give
Statement-basedFour or five statements, count the correct onesMark each T or F separately in the margin before reading the options
Match-the-columnFour items in List I to four in List IIFix the surest pair first, then strike out options that contradict it
Assertion–ReasonA claim and a reason about Lenz, resonance or powerCheck A and R separately, then ask "does R cause A?"
Graph/diagram-basedΦ–t, i–t, Z–f, I–f or phasor diagramsSlope of Φ–t gives emf; peak of I–f gives resonance; read axes and units

Study plan

DayWhat to studyPractice target
1Chapter 1: flux, Faraday's law, induced chargeWorked examples + Q1–30 of Chapter 1
2Chapter 2: Lenz's law, motional emf, rotating rod, eddy currentsChapter 2 MCQs + 10 rod-on-rails sums
3Chapter 3: self and mutual inductance, energy storedChapter 3 MCQs + Level 4 sets of Chapters 1–3
4Chapters 4 and 5: rms, average, phasors, pure R, L, CBoth chapters' MCQs
5Chapter 6: series LCR, resonance, Q factorChapter 6 MCQs + 15 impedance sums
6Chapters 7 and 8: power factor, wattless current, generator, transformerBoth chapters' MCQs + Level 4 sets of Chapters 4–8
7Full revision with the revision sheetsUnit test (50 min) + Mock Test 2 (35 min), then review every mistake

Last 48 hours plan

  1. Day −2: read the Book-at-a-glance sheet and all eight revision sheets; rewrite every formula once from memory.

  2. Day −1 morning: do Mock Test 2 timed, then redo only the questions you got wrong.

  3. Day −1 evening: read the 40 rapid-fire facts and the common mistakes checklist; no new topics.

Time-saving tricks

  • Induced charge ignores time. If a question gives the time of a flux change but asks for charge, use q = NΔΦ/R and ignore the time.

  • Rotating rod = average speed. e = ½Bωl² is just B × l × (average speed ωl/2). Use it for blades and spokes.

  • Spot the resonance. If XL = XC, write Z = R, φ = 0 and power factor 1 at once; current is V/R.

  • Use right-triangle triples. Impedance values are often 3-4-5, 6-8-10, 5-12-13 or 8-15-17. Spot them before taking square roots.

  • Sum of sin and cos. a sin ωt + b cos ωt has amplitude √(a² + b²). For DC plus AC, Irms = √(Idc² + I0²/2).

  • Unit check to eliminate options. L/R and √(LC) are in seconds, ωL and 1/ωC are in ohm, B²/2μ0 is in J/m³.

  • Transformer ratios flip for current. Vs/Vp = Ns/Np, but Is/Ip = Np/Ns in an ideal transformer.

  • Power without the angle. Average power = Irms²R in any series circuit, so you rarely need cos φ separately.

5 min left
‹
›