Chapter 5 of 12 · 22 min read

Chapter 3: Self and Mutual Inductance

What you will learn

  • What mutual inductance is, and how to find it for two coaxial solenoids.

  • What self inductance is, and why a coil fights any change in its own current.

  • The formula L = μ0N²A/l for a long solenoid, and what a core does to it.

  • The energy stored in an inductor, ½LI², and the magnetic energy density B²/2μ0.

  • Quick results for inductors joined in series and in parallel.

3.1 Mutual inductance

Place two coils near each other. Send a current I1 through coil 1. Some of its field lines pass through coil 2. The flux linkage of coil 2 is proportional to I1:

N2Φ2=MI1N_2\Phi_2 = M I_1

The constant M is the mutual inductance of the pair. If I1 changes, the flux in coil 2 changes, and Faraday's law gives an emf in coil 2:

e2=−MdI1dte_2 = -M\frac{dI_1}{dt}

So M is the emf induced in one coil per unit rate of change of current in the other. Its SI unit is the henry (H). From the formula, 1 H = 1 V s/A = 1 Wb/A = 1 Ω s. Its dimensions are [ML²T⁻²A⁻²].

A remarkable fact: M is the same whichever coil carries the current. The flux in coil 1 due to a current in coil 2 gives the same M. We write M12 = M21 = M.

M depends only on geometry and material: the number of turns, the sizes of the coils, the distance between them, their relative orientation, and the core material. It does not depend on the current.

3.2 Mutual inductance of two coaxial solenoids

Take a long solenoid S1 of length l, radius r1 and n1 turns per unit length. Inside it, and coaxial with it, place a second solenoid S2 of the same length, radius r2 (smaller) and n2 turns per unit length.

The field inside S1 is B1 = μ0n1I1. It is uniform, so every turn of S2 has flux B1πr2². S2 has n2l turns. Its total flux linkage is:

N2Φ2=(n2l)(μ0n1I1)(πr22)⇒M=μ0n1n2πr22 lN_2\Phi_2 = (n_2 l)(\mu_0 n_1 I_1)(\pi r_2^2) \quad\Rightarrow\quad M = \mu_0 n_1 n_2 \pi r_2^2\, l

Notice that only the area of the inner solenoid enters. Field lines of S1 that pass outside S2 do not link it. If the space is filled with a material of relative permeability μr, M becomes μr times larger.

In terms of total turns (N1 = n1l, N2 = n2l), the same result is M = μ0N1N2A2/l.

For two coils with self inductances L1 and L2, a useful bridge result is M = k√(L1L2). The coupling coefficient k lies between 0 and 1. For perfect coupling (all flux of one links the other), k = 1.

3.3 Self inductance

A coil also links its own field. When a current I flows in a coil, its flux linkage is proportional to I:

NΦ=LIN\Phi = LI

L is the self inductance (unit henry). If the current changes, the coil's own flux changes, and an emf appears in the same coil:

e=−LdIdte = -L\frac{dI}{dt}

By Lenz's law this emf opposes the change in current. When you switch on, it fights the rise. When you switch off, it tries to keep the current going. That is why it is often called a back emf. It is also why switches on large motors and fans spark when opened.

Inductance is electrical inertia. Mass resists changes in velocity; inductance resists changes in current. Push a heavy cart and it is slow to start and slow to stop. A large coil behaves the same way with current.

3.4 Self inductance of a long solenoid

A solenoid of length l, area A, N turns (n = N/l). Its field is B = μ0nI. Total flux linkage:

NΦ=N(μ0nI)A=μ0n2Al I⇒L=μ0n2Al=μ0N2AlN\Phi = N(\mu_0 n I)A = \mu_0 n^2 A l\, I \quad\Rightarrow\quad L = \mu_0 n^2 A l = \frac{\mu_0 N^2 A}{l}

With a core of relative permeability μr, L = μrμ0N²A/l. A soft-iron core can raise L hundreds of times.

Change made (others fixed)Effect on L
N doubled (same length)4 times
Area doubled2 times
Length halved (same N)2 times
Radius doubled4 times
Iron core of μr insertedμr times

3.5 Energy stored in an inductor

To build up a current in a coil, the source must work against the back emf. When the current is i and rising at di/dt, the power needed is:

P=e i=LididtP = e\,i = L i\frac{di}{dt}

The work done to raise the current from 0 to I is:

U=∫0ILi di=12LI2U = \int_0^I L i\,di = \frac{1}{2}LI^2

This energy sits in the magnetic field. Compare with a moving body, ½mv²: L plays the part of m and I the part of v.

Energy density. For a solenoid, L = μ0n²Al and B = μ0nI. So U = ½μ0n²Al × (B/μ0n)² = (B²/2μ0) × Al. Al is the volume inside the coil, so the energy per unit volume is:

uB=B22μ0u_B = \frac{B^2}{2\mu_0}

This holds for any magnetic field in vacuum, not only for solenoids.

3.6 Inductors in series and parallel

When two coils are far apart (no mutual coupling), they combine like resistors:

Lseries=L1+L2,1Lparallel=1L1+1L2L_{series} = L_1 + L_2, \qquad \frac{1}{L_{parallel}} = \frac{1}{L_1} + \frac{1}{L_2}

In series, the same di/dt flows through both, so the emfs add. In parallel, the same emf acts across both, so the rates of change of current add.

Worked example 3.1: The current in one coil falls from 5 A to 1 A in 0.2 s. An emf of 40 V is induced in a nearby coil. Find the mutual inductance.

Solution: M = e ÷ (dI/dt) = 40 ÷ (4/0.2) = 40/20 = 2 H.

Worked example 3.2: A 200-turn coil carries 2 A. The flux through each turn is 5 mWb. Find its self inductance.

Solution: L = NΦ/I = 200 × 5 × 10⁻³ / 2 = 0.5 H.

Worked example 3.3: An air-cored solenoid is 0.5 m long, has 500 turns and a cross-section of 10 cm². Find L.

Solution: L = μ0N²A/l = 4π × 10⁻⁷ × 250000 × 10⁻³ / 0.5 = 6.28 × 10⁻⁴ H = 0.63 mH.

Worked example 3.4: The current in a 50 mH coil rises steadily from 0 to 2 A in 10 ms. Find the self-induced emf.

Solution: e = L dI/dt = 0.05 × (2/0.01) = 10 V, directed against the rise.

Worked example 3.5: An inductor of 0.2 H carries 3 A. Find the stored energy. If the current rises by 10%, by what percentage does the energy rise?

Solution: U = ½ × 0.2 × 9 = 0.9 J. U ∝ I², so new U = (1.1)² = 1.21 times. The energy rises by 21%, not 10%.

Worked example 3.6: A long solenoid has 1000 turns per metre. A 100-turn coil of radius 1 cm sits coaxially inside it. Find M.

Solution: M = μ0n1N2πr2² = 4π × 10⁻⁷ × 1000 × 100 × π × 10⁻⁴ = 3.9 × 10⁻⁵ H ≈ 39 μH.

Worked example 3.7: Two coils have L1 = 4 mH and L2 = 9 mH. The coupling coefficient is 0.5. Find M.

Solution: M = k√(L1L2) = 0.5 × √36 = 0.5 × 6 = 3 mH.

Worked example 3.8 (NEET-hard): The current in a 0.5 H coil varies as i = (2t² − 3t) A. Find the emf and the stored energy at t = 2 s.

Solution: di/dt = 4t − 3 = 5 A/s at t = 2 s. So e = 0.5 × 5 = 2.5 V. At t = 2 s, i = 8 − 6 = 2 A, so U = ½ × 0.5 × 4 = 1 J.

Quick revision

  • Mutual: N2Φ2 = MI1, e2 = −M dI1/dt, M12 = M21.

  • Coaxial solenoids: M = μ0n1n2πr2²l (inner area only). M = k√(L1L2), k up to 1.

  • Self: NΦ = LI, e = −L dI/dt. Unit henry = V s/A = Wb/A.

  • Solenoid: L = μ0N²A/l = μ0n²Al; times μr with a core.

  • Energy U = ½LI²; energy density B²/2μ0.

  • Series (no coupling) L1 + L2; parallel L1L2/(L1 + L2).

NEET traps

  • Thinking L or M depends on the current. They depend only on geometry and core.

  • Using the outer solenoid's area in M. Use the inner one.

  • Doubling N and saying L doubles. L goes as N².

  • Thinking an inductor opposes a steady current. It only opposes changes.

  • A 10% rise in current gives a 21% rise in energy, not 10% or 20%.

  • Writing μ0B²/2 for energy density. The μ0 goes in the denominator.

Practice MCQs: Chapter 3

Level 1: Concept check

1. The SI unit of inductance is (a) weber (b) tesla (c) henry (d) farad

2. One henry is equal to (a) 1 V s A⁻¹ (b) 1 V A s⁻¹ (c) 1 Wb A (d) 1 Ω s⁻¹

3. For a long solenoid of fixed length and area, the self inductance is proportional to (a) N (b) N² (c) 1/N (d) √N

4. The energy stored in an inductor L carrying current I is (a) LI² (b) ½LI (c) 2LI² (d) ½LI²

5. The self-induced emf in a coil opposes (a) the current at all times (b) the change in current (c) the source emf at all times (d) the resistance of the coil

6. The dimensional formula of inductance is (a) [ML²T⁻²A⁻¹] (b) [MLT⁻²A⁻²] (c) [ML²T⁻²A⁻²] (d) [ML²T⁻³A⁻²]

7. In the analogy between electrical and mechanical systems, inductance corresponds to (a) mass (b) force (c) velocity (d) spring constant

8. The mutual inductance of two coils does NOT depend on (a) their numbers of turns (b) the distance between them (c) their relative orientation (d) the current in them

9. A soft-iron rod is pushed into an air-cored solenoid. Its self inductance (a) decreases (b) stays the same (c) increases (d) becomes zero

10. The energy density of a magnetic field B in vacuum is (a) B²/2μ0 (b) μ0B²/2 (c) B/2μ0 (d) 2B²/μ0

Level 2: NEET standard

11. The current in a coil falls steadily from 4 A to zero in 0.1 s, and the self-induced emf is 20 V. The self inductance is (a) 5 H (b) 0.5 H (c) 2 H (d) 0.05 H

12. An air-cored solenoid has 1000 turns, length 0.5 m and area 5 cm². Its self inductance is about (a) 12.6 mH (b) 0.126 mH (c) 2.5 mH (d) 1.26 mH

13. The number of turns of a solenoid is doubled, keeping its length and area the same. Its self inductance becomes (a) four times (b) double (c) half (d) unchanged

14. The energy stored in a 40 mH inductor carrying 5 A is (a) 1 J (b) 0.25 J (c) 0.5 J (d) 5 J

15. The current through an inductor is increased by 20%. The stored energy increases by (a) 20% (b) 44% (c) 40% (d) 21%

16. A current of 2 A in coil A gives a flux linkage of 8 mWb in coil B. If the current in A changes at 50 A/s, the emf in B is (a) 0.2 V (b) 0.4 V (c) 0.1 V (d) 2 V

17. Two perfectly coupled coils have self inductances 2 mH and 8 mH. Their mutual inductance is (a) 10 mH (b) 16 mH (c) 6 mH (d) 4 mH

18. A 100-turn coil carries 5 A, and the flux through each turn is 2 × 10⁻³ Wb. Its self inductance is (a) 4 mH (b) 400 mH (c) 40 mH (d) 0.4 mH

19. The current in a 0.2 H coil is i = (3t² + 2t) A. The magnitude of the emf at t = 1 s is (a) 1.6 V (b) 1.0 V (c) 0.8 V (d) 3.2 V

20. A long solenoid has 2000 turns per metre. A 50-turn coil of area 4 cm² is placed coaxially inside it. Their mutual inductance is about (a) 5 μH (b) 50 μH (c) 0.5 mH (d) 5 mH

21. Inductors of 3 mH and 6 mH, far apart from each other, are joined in parallel. The equivalent inductance is (a) 9 mH (b) 4.5 mH (c) 2 mH (d) 18 mH

22. An air-cored coil has L = 2 mH. A core of relative permeability 500 fills it completely. The new inductance is (a) 0.2 H (b) 4 mH (c) 0.5 H (d) 1 H

Level 3: Challenge

23. An inductor stores 64 mJ when it carries 2 A. The current needed to store 0.256 J is (a) 8 A (b) 4 A (c) 2.8 A (d) 16 A

24. The length of a solenoid is halved, keeping its number of turns and cross-section the same. Its self inductance (a) doubles (b) halves (c) becomes four times (d) stays the same

25. The field inside a solenoid is 0.5 T and its inner volume is 2 × 10⁻⁴ m³. The magnetic energy stored inside is about (a) 10 J (b) 40 J (c) 2 J (d) 20 J

26. The current in a 5 mH coil rises uniformly from 0 to 4 A in 2 ms. The self-induced emf during this time is (a) 20 V (b) 2.5 V (c) 10 V (d) 5 V

27. When the current in coil 1 changes at 10 A/s, the emf in coil 2 is 30 mV. When the current in coil 2 changes at 20 A/s, the emf in coil 1 is (a) 15 mV (b) 60 mV (c) 30 mV (d) 120 mV

28. A coil of inductance 0.6 H and resistance 4 Ω is connected to a 12 V battery of negligible internal resistance. Once the current is steady, the energy stored in the coil is (a) 2.7 J (b) 5.4 J (c) 1.8 J (d) zero

29. Assertion (A): The mutual inductance of a pair of coils is the same whichever coil carries the changing current. Reason (R): Mutual inductance depends on the current flowing in the primary coil. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true

30. Statement I: The self inductance of a long air-cored solenoid is proportional to the square of its number of turns. Statement II: The energy per unit volume stored in a magnetic field is proportional to B². (a) Both true (b) Both false (c) I true, II false (d) I false, II true

Answer key with reasons

QAnsReason
1cInductance is measured in henry
2aFrom e = L dI/dt, L = V s/A
3bL = μ0N²A/l
4dWork against back emf gives ½LI²
5bLenz's law acts on the change
6cL = 2U/I² gives [ML²T⁻²]/[A²]
7a½LI² matches ½mv²
8dM depends only on geometry and core
9cL rises by the factor μr
10au = B²/2μ0
11bL = 20 ÷ (4/0.1) = 0.5 H
12d4π × 10⁻⁷ × 10⁶ × 5 × 10⁻⁴ / 0.5 = 1.26 mH
13aL ∝ N²
14c½ × 0.04 × 25 = 0.5 J
15b(1.2)² = 1.44
16aM = 4 mH; e = 4 mH × 50 A/s
17dM = √(L1L2) = √16 mH
18c100 × 0.002 / 5 = 0.04 H
19adi/dt = 8 A/s; e = 0.2 × 8
20b4π × 10⁻⁷ × 2000 × 50 × 4 × 10⁻⁴ = 5.0 × 10⁻⁵ H
21c3 × 6 / 9 = 2 mH
22d500 × 2 mH = 1 H
23bFour times the energy needs twice the current
24aL ∝ 1/l
25dB²/2μ0 ≈ 9.95 × 10⁴ J/m³, times volume
26c0.005 × (4/0.002) = 10 V
27bM = 3 mH; 3 mH × 20 A/s = 60 mV
28aI = 3 A; ½ × 0.6 × 9 = 2.7 J
29cM12 = M21; M is independent of current
30aL ∝ N² and u = B²/2μ0

Chapter 3 revision sheet

One-page summary

  • Mutual inductance: flux linkage in coil 2 due to current in coil 1, N2Φ2 = M I1; induced emf e2 = −M dI1/dt.

  • M12 = M21 for any pair of coils (reciprocity). Unit henry: 1 H = 1 V s/A = 1 Wb/A.

  • M depends on the shapes, sizes, turns, separation, orientation of the coils and the core material, not on the current.

  • Two long coaxial solenoids (inner radius r1, length l): M = μ0 n1 n2 πr1² l = μ0 N1 N2 A1/l.

  • Coupling coefficient: M = k√(L1 L2), with 0 ≤ k ≤ 1; k = 1 for perfect coupling.

  • Self inductance: NΦ = LI; back emf e = −L dI/dt.

  • The back emf opposes the change in current, not the current itself. Inductance acts like electrical inertia.

  • Long solenoid: L = μ0 N²A/l = μ0 n² A l. With a core of relative permeability μr, L = μr μ0 N²A/l.

  • Energy stored: U = ½LI², built up against the back emf while the current grows.

  • Energy density of a magnetic field: u = B²/(2μ0), valid for any field.

  • Series (no coupling): L = L1 + L2. Parallel (no coupling): 1/L = 1/L1 + 1/L2.

  • Series with mutual coupling M: L1 + L2 + 2M (aiding) or L1 + L2 − 2M (opposing).

  • Breaking a circuit with a big inductor fast gives a large back emf, which can spark across a switch.

Must-remember table

QuantityFormulaUnit / dimension
Self inductance (solenoid)μ0 N²A/lH, [M L² T⁻² A⁻²]
Mutual inductance (coaxial)μ0 N1 N2 A1/lH
Back emfL dI/dtV
Energy stored½LI²J
Energy densityB²/(2μ0)J/m³
CouplingM = k√(L1 L2)k has no unit
μ04π × 10⁻⁷H/m
L/Rtime constants

Memory aids

  • "Lazy Lion": L resists change, like a lazy lion that will not start or stop running quickly.

  • "Square the turns": L goes as N², so double the turns and L is four times.

  • "Half L I-squared, like half m v-squared": U = ½LI² matches kinetic energy, with L as mass and I as speed.

  • "Mutual is fair": M12 = M21; each coil affects the other equally.

Concept connections

  • Field inside a long solenoid, B = μ0 n I, comes from Physics Book 13: Magnetic Effects of Current and Magnetism.

  • U = ½LI² mirrors the capacitor energy ½CV² in Physics Book 11: Electrostatics.

  • Inductors decide phase and reactance in Chapter 5 and Chapter 6 of this book; mutual induction drives the transformer in Chapter 8.

Practice MCQs: Chapter 3, Level 4 (new NEET pattern)

31. Match List I with List II.

List I:

  • A. Self inductance of a long solenoid

  • B. Mutual inductance of two coaxial solenoids (same length l, inner area A)

  • C. Energy stored in an inductor

  • D. Magnetic energy density

List II:

  • (i) B²/(2μ0)

  • (ii) μ0 N²A/l

  • (iii) ½LI²

  • (iv) μ0 N1 N2 A/l

(a) A-iv, B-ii, C-iii, D-i (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-iv, C-iii, D-i (d) A-iii, B-iv, C-ii, D-i

32. L1 = 3 H and L2 = 6 H. Match the arrangement (List I) with the equivalent inductance (List II).

List I:

  • A. Series, no coupling

  • B. Parallel, no coupling

  • C. Series aiding, M = 1 H

  • D. Series opposing, M = 1 H

List II:

  • (i) 7 H

  • (ii) 9 H

  • (iii) 2 H

  • (iv) 11 H

(a) A-iii, B-ii, C-iv, D-i (b) A-ii, B-iii, C-i, D-iv (c) A-iv, B-iii, C-ii, D-i (d) A-ii, B-iii, C-iv, D-i

33. An air-core solenoid has self inductance L. Match the change (List I) with the new inductance (List II). Area stays the same unless stated.

List I:

  • A. Turns doubled, same length

  • B. Length doubled, same turns

  • C. Soft-iron core of μr = 100 inserted

  • D. Turns doubled and length doubled

List II:

  • (i) L/2

  • (ii) 2L

  • (iii) 4L

  • (iv) 100L

(a) A-ii, B-i, C-iv, D-iii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iii, C-iv, D-ii

34. Match the quantity (List I) with its dimensions (List II).

List I:

  • A. Inductance

  • B. Magnetic flux

  • C. L/R

  • D. ½LI²

List II:

  • (i) [T]

  • (ii) [M L² T⁻² A⁻¹]

  • (iii) [M L² T⁻²]

  • (iv) [M L² T⁻² A⁻²]

(a) A-iv, B-ii, C-i, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-ii, C-iii, D-i

35. How many of the following statements are correct?

  • A. The self inductance of a coil depends on the current in it.

  • B. M12 = M21 for any pair of coils.

  • C. Inductance plays the role of inertia in circuits.

  • D. The energy of an inductor is stored in its magnetic field.

  • E. The coupling coefficient k can exceed 1 with an iron core.

(a) 2 (b) 4 (c) 3 (d) 5

36. Choose the correct set of statements about the mutual inductance of two coils.

  • A. M increases if a soft-iron core links both coils.

  • B. M is largest when the coil axes are perpendicular.

  • C. M = k√(L1 L2).

  • D. Moving the coils apart reduces M.

(a) A, C and D only (b) A and B only (c) B, C and D only (d) C and D only

37. How many statements about back emf are correct?

  • A. It opposes the change in current, not the current itself.

  • B. Across an ideal inductor carrying a steady current, it is zero.

  • C. Switching off a large inductor quickly can cause sparking.

  • D. An ideal inductor opposes a steady direct current.

(a) 1 (b) 2 (c) 4 (d) 3

38. An inductor of 0.2 H carries 3 A. Choose the correct set.

  • A. It stores 0.9 J.

  • B. Doubling the current doubles the stored energy.

  • C. Inside a solenoid, the energy per unit volume is B²/(2μ0).

  • D. The stored energy is zero when the current is steady.

(a) A and B only (b) A and C only (c) A, C and D only (d) B and D only

39. The current in a 50 mH coil rises linearly from 0 to 4 A in the first 2 ms, stays at 4 A from 2 ms to 5 ms, then falls linearly to 0 by 6 ms. The magnitudes of the self-induced emf in the three intervals are: (a) 200 V, 0, 100 V (b) 100 V, 100 V, 200 V (c) 100 V, 0, 200 V (d) 0.1 V, 0, 0.2 V

40. The current in coil 1 is changed at different rates, and the emf in a nearby coil 2 is noted.

dI1/dt (A/s)102040
e2 (mV)153060

The mutual inductance, and the emf in coil 1 when the current in coil 2 changes at 20 A/s, are: (a) 1.5 mH, 15 mV (b) 1.5 mH, 30 mV (c) 0.67 mH, 30 mV (d) 15 mH, 300 mV

41. For a fixed inductor, the graph of stored energy U against current I is: (a) a straight line through the origin (b) a hyperbola (c) a horizontal line (d) a parabola through the origin, opening upward

Case for Q42–43: A student winds an air-core solenoid of length 0.5 m with 1000 turns. Its cross-section area is 2 × 10⁻³ m². She passes a steady 2 A through it. Take μ0 = 4π × 10⁻⁷ H/m.

42. The self inductance is about: (a) 5.0 mH (b) 2.5 mH (c) 10 mH (d) 50 mH

43. The magnetic energy density inside the solenoid is about: (a) 1 J/m³ (b) 5 J/m³ (c) 10 J/m³ (d) 100 J/m³

44. Two coils have L1 = 4 mH and L2 = 9 mH with coupling coefficient 0.5. Joined in series so that their fluxes oppose, their equivalent inductance is: (a) 13 mH (b) 19 mH (c) 10 mH (d) 7 mH

45. The current in a 0.5 H coil is i = 2t² − t (in A, t in s). At t = 2 s, the self-induced emf and the stored energy are: (a) 3.5 V, 9 J (b) 7 V, 9 J (c) 3.5 V, 18 J (d) 1.75 V, 4.5 J

Level 4 answer key

QAnsReason
31cStandard results for L, M, U and u
32d3 + 6 = 9; 18/9 = 2; 9 + 2 = 11; 9 − 2 = 7
33bL ∝ μr N²/l: 4L, L/2, 100L, 4/2 = 2L
34aH = Wb/A; Wb = V s; L/R is a time; ½LI² is energy
35cB, C, D true; L is geometric; k never exceeds 1
36aM is zero or small when axes are perpendicular
37dA, B, C true; steady current sees no back emf in an ideal inductor
38b½ × 0.2 × 9 = 0.9 J; U ∝ I²; energy is present whenever current flows
39c0.05 × 4/0.002 = 100 V; 0; 0.05 × 4/0.001 = 200 V
40bM = 15 mV/(10 A/s) = 1.5 mH; same M both ways, 1.5 mH × 20 = 30 mV
41dU = ½LI² is quadratic in I
42a4π × 10⁻⁷ × 10⁶ × 2 × 10⁻³/0.5 = 5.03 × 10⁻³ H
43cU = ½ × 5.03 mH × 4 = 10 mJ over volume 10⁻³ m³, so about 10 J/m³
44dM = 0.5√36 = 3 mH; 4 + 9 − 6 = 7 mH
45adi/dt = 4t − 1 = 7 A/s, e = 3.5 V; i = 6 A, U = ½ × 0.5 × 36 = 9 J
22 min left
‹
›