LATEST
IBPS & BankingBy Pareeksha Editorial Team· ⏱ 14 min read

Inequality Questions Bank Exams: Rules and 12 Solved Examples

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Inequality Questions Bank Exams: Rules and 12 Solved Examples
On this page
  1. Where inequality sits in the paper
  2. The three forms
  3. What each sign allows
  4. The chain method
  5. Checking conclusions and the either-or rule
  6. 12 worked questions
  7. Question 1 (direct)
  8. Question 2 (direct, broken path)
  9. Question 3 (either-or from ≥)
  10. Question 4 (either-or from no relation)
  11. Question 5 (the trap version of Question 4)
  12. Question 6 (separate statements)
  13. Question 7 (coded)
  14. Question 8 (coded, one breaks)
  15. Question 9 (coded either-or)
  16. Question 10 (find the expression)
  17. Question 11 (three conclusions, mixed)
  18. Question 12 (coded, three conclusions)
  19. Common traps
  20. A two-minute drill
  21. How to prepare
  22. Frequently asked questions
  23. What is the fastest method for inequality questions?
  24. When does "either I or II" follow in inequality?
  25. Does "A ≥ B" follow if the chain gives A ≥ B?
  26. How do I handle coded inequality quickly?
  27. Is inequality asked in mains as well as prelims?
  28. Sources

Inequality is one of the few reasoning topics where a careful candidate can reach full accuracy. There is no guessing about seating positions and no long setup. You read a chain of signs, decide which relations are certain, and mark. The marks are lost in only three ways: reading a sign backwards, joining two signs that cannot be joined, and misjudging the "either-or" option.

This post covers the three forms you will meet (direct, coded and either-or), the one rule that decides every chain, and 12 original worked questions. Every answer was checked step by step, and we also confirmed each one by testing all small number assignments that satisfy the statements. The section names and question counts quoted below come from the current IBPS and SBI notices, listed under Sources. The method itself is standard reasoning; no notice prescribes it.

Where inequality sits in the paper

Inequality questions belong to the Reasoning section. In the current notices that section is:

Exam (notice) Stage Section Questions Time
IBPS PO/MT (CRP PO/MT-XVI, 01.07.2026) Prelims Reasoning Ability 35 20 minutes
IBPS Clerk (CRP CSA-XVI, 01.08.2026) Prelims Reasoning Ability 35 20 minutes
SBI Junior Associates (CRPD/CR/2026-27/17) Prelims Reasoning Ability 35 20 minutes
SBI PO (CRPD/PO/2026-27/09) Prelims Reasoning Ability 30 20 minutes

The notices do not say how many inequality questions appear; that varies by paper. What matters is that a 35-question, 20-minute section allows about 34 seconds a question on average, so inequality questions must be solved in well under that to leave time for puzzles. The puzzles and seating arrangement guide covers the slow half of the section.

The three forms

Direct inequality. You get a statement such as P > Q ≥ R = S < T and two or three conclusions (P > S, T > R). You decide which conclusions definitely follow.

Coded inequality. The signs are replaced by symbols such as @, #, $, % and &, each defined in words ("P @ Q means P is not smaller than Q"). You decode first and then solve as a direct question.

Either-or. Two conclusions about the same pair of elements. Neither follows on its own, but together they cover every possibility, so the answer is "either I or II follows". This is the type most often marked wrongly.

A fourth variant asks you to pick the expression in which a given conclusion is definitely true, or the sign that should replace a question mark. It uses the same rule.

What each sign allows

Sign Meaning Rules out
A > B A is greater than B A = B and A < B
A ≥ B A is greater than or equal to B A < B only
A = B A equals B both > and <
A ≤ B A is less than or equal to B A > B only
A < B A is less than B A = B and A > B

Coded questions describe these in words. Learn the translations once:

  • "not smaller than" = ≥
  • "not greater than" = ≤
  • "neither smaller than nor equal to" = >
  • "neither greater than nor equal to" = <
  • "neither greater nor smaller than" = =

The chain method

To test a conclusion about two elements, find the path between them in the statement and look only at the signs on that path.

  1. All signs on the path point the same way (or are "="): a relation follows.
  2. The combine rule: if every sign on the path is ≥ or =, the result is ≥. If even one sign is a strict > (with the rest ≥ or =), the result is the strict >. The same applies on the "less than" side with ≤ and <.
  3. Two signs on the path point opposite ways (a > or ≥ meets a < or ≤): no definite relation. Stop there.

So P > Q ≥ R gives P > R, M ≥ N = O gives M ≥ O, and K > L ≤ M gives nothing about K and M.

When the statements are given separately (A ≥ B, B > C, C < D), join them on the shared element into one chain first: A ≥ B > C < D. Then apply the same three rules.

Checking conclusions and the either-or rule

For each conclusion:

  • Derive the relation from the chain.
  • The conclusion follows only if it states that relation exactly. If the chain gives "≥" and the conclusion says ">" or "=", it does not follow on its own.

Mark "either I or II" only when all three conditions hold:

  1. Both conclusions involve the same two elements.
  2. Neither follows by itself.
  3. Together they cover every case. The usual pairs are ">" with "=" (when the chain gives ≥), "<" with "=" (when the chain gives ≤), and complementary pairs such as ">" with "≤" or "<" with "≥" (when the chain gives no relation).

A pair like ">" and "<" with no relation in the chain is not either-or, because equality is left uncovered. That pair gets "neither".

12 worked questions

Each question asks which conclusions definitely follow, unless stated otherwise. Try each before reading the solution.

Question 1 (direct)

Statement: P > Q ≥ R = S < T Conclusions: I. P > S II. T > R

Solution. P to S: the path is P > Q ≥ R = S. Signs >, ≥, = all point the same way and include a strict >, so P > S. Conclusion I follows. T to R: read from the right, T > S and S = R, so T > R. Conclusion II follows. Answer: both I and II follow.

Question 2 (direct, broken path)

Statement: A ≥ B > C ≤ D < E Conclusions: I. A > C II. B > D

Solution. A to C: A ≥ B > C, same direction with one strict sign, so A > C. I follows. B to D: B > C and then C ≤ D. The first sign points down, the second up. Opposite directions, so no relation. II does not follow. Answer: only I follows.

Question 3 (either-or from ≥)

Statement: M ≤ N = O ≥ P Conclusions: I. M < O II. M = O

Solution. M to O: M ≤ N = O gives M ≤ O. Neither "M < O" nor "M = O" is certain on its own. Both are about M and O, and together "<" and "=" make exactly "≤". Answer: either I or II follows.

Question 4 (either-or from no relation)

Statement: K > L ≤ M Conclusions: I. K > M II. K ≤ M

Solution. K to M: K > L, then L ≤ M. Opposite directions, so nothing is known. K could be above, equal to or below M. Neither conclusion is certain. But "K > M" and "K ≤ M" between them cover every case, so one of them must be true. Answer: either I or II follows.

Question 5 (the trap version of Question 4)

Statement: K > L ≤ M Conclusions: I. K < M II. K = M

Solution. Same chain, no relation between K and M. This time the conclusions are "<" and "=". Together they make "≤", but K > M is also possible (take K = 3, L = 1, M = 2). So they do not cover every case. Answer: neither I nor II follows.

Question 6 (separate statements)

Statements: A ≥ B, B > C, C < D, D ≤ E Conclusions: I. A > C II. E > C III. A > E

Solution. Join on shared elements: A ≥ B > C < D ≤ E. A to C: ≥ then >, same direction, strict, so A > C. I follows. E to C: read from the right, E ≥ D and D > C, so E > C. II follows. A to E: the path goes down to C and then up to E. Opposite directions, no relation. III does not follow. Answer: only I and II follow.

For the coded questions (7, 8, 9 and 12), use this code:

  • P @ Q means P is not smaller than Q (≥)
  • P # Q means P is neither smaller than nor equal to Q (>)
  • P $ Q means P is neither greater than nor smaller than Q (=)
  • P % Q means P is not greater than Q (≤)
  • P & Q means P is neither greater than nor equal to Q (<)

Question 7 (coded)

Statements: R # S, S @ T, T $ U Conclusions: I. R # U II. S @ U

Solution. Decode: R > S, S ≥ T, T = U. Chain: R > S ≥ T = U. Conclusion I decodes to R > U: the path R > S ≥ T = U gives R > U. Follows. Conclusion II decodes to S ≥ U: S ≥ T = U gives S ≥ U. Follows. Answer: both I and II follow.

Question 8 (coded, one breaks)

Statements: B % C, C & D, D @ E Conclusions: I. B & D II. E # C

Solution. Decode: B ≤ C, C < D, D ≥ E. Chain: B ≤ C < D ≥ E. I is B < D: B ≤ C < D, same direction with a strict sign, so B < D. Follows. II is E > C: from C the path goes up to D (C < D) and then down to E (D ≥ E). Opposite directions, no relation. Does not follow. Answer: only I follows.

Question 9 (coded either-or)

Statements: F @ G, G $ H, H % I Conclusions: I. F # I II. F % I

Solution. Decode: F ≥ G, G = H, H ≤ I. Chain: F ≥ G = H ≤ I. F to I: F ≥ G = H gives F ≥ H, then H ≤ I points the other way. No relation. Conclusion I is F > I and II is F ≤ I. Same pair, neither certain, and ">" with "≤" covers every case. Answer: either I or II follows.

Question 10 (find the expression)

In which expression is M > Q definitely true?

(a) M > N ≥ O < P = Q (b) M ≥ N > O = P ≥ Q (c) M = N ≥ O ≥ P = Q (d) M > N = O ≤ P < Q (e) M < N > O ≥ P > Q

Solution. Check each path from M to Q. (a) The sign O < P turns the direction. No relation. (b) ≥, >, =, ≥: all point the same way, with one strict >. So M > Q. (c) =, ≥, ≥, =: same direction but no strict sign. Only M ≥ Q. (d) O ≤ P turns the direction. No relation. (e) M < N and then N > O. Turns at once. No relation. Answer: (b). Option (c) is the trap: "≥" is not enough when the question asks for ">".

Question 11 (three conclusions, mixed)

Statement: J ≤ K < L = M ≥ N > O Conclusions: I. J < M II. K < N III. K ≥ N

Solution. J to M: ≤, <, = gives J < M (one strict sign). I follows. K to N: K < L = M and then M ≥ N. The direction turns at M, so no relation. II and III are about the same pair (K, N), neither is certain, and "<" with "≥" covers every case. Answer: I follows, and either II or III follows.

Question 12 (coded, three conclusions)

Statements: W & X, X $ Y, Y # Z Conclusions: I. W & Y II. Z & X III. W # Z

Solution. Decode: W < X, X = Y, Y > Z. Chain: W < X = Y > Z. I is W < Y: W < X = Y gives W < Y. Follows. II is Z < X: from the right, Z < Y and Y = X, so Z < X. Follows. III is W > Z: the path goes up from W to Y and then down to Z. No relation. Does not follow, and there is no partner conclusion about W and Z, so no either-or. Answer: only I and II follow.

Common traps

  • Reading the conclusion backwards. "T > R" and "R < T" are the same statement. When the conclusion names the elements in the reverse order to the chain, read the chain from right to left rather than flipping signs in your head.
  • Treating "≥" as ">". If the path has no strict sign, the result is only "≥" or "≤". Question 10 (c) shows the cost.
  • Joining across a turn. One opposite sign anywhere on the path breaks it, even if every other sign agrees.
  • Marking either-or too easily. Check all three conditions. ">" with "<" is not complementary, as Question 5 shows.
  • Decoding in a hurry. In coded questions, write the decoded chain on the rough sheet before reading the conclusions. Most coded errors are a single symbol decoded as its neighbour.
  • Ignoring separate statements. Join statements on the shared element before you test anything.

A two-minute drill

Inequality speed comes from habit, not new tricks. For two weeks, write ten chains of five or six elements a day and test three random pairs in each. Every third day, turn your chains into a code and solve them as coded questions. Aim for 15 to 20 seconds on a direct question and 25 to 30 on a coded one.

Mixing this with timed sectional work matters, because the trap in a real paper is time pressure, not difficulty. The sectional cut-off guide explains why a fast, accurate Reasoning score protects your overall attempt.

How to prepare

Frequently asked questions

What is the fastest method for inequality questions?

The chain method. Trace the path between the two elements in the conclusion and check that every sign points the same way. If it does, the strongest sign on the path gives the result; if any sign turns, there is no relation.

When does "either I or II" follow in inequality?

When both conclusions are about the same pair, neither is certain by itself, and together they cover every possibility. Typical pairs are ">" with "=" when the chain gives "≥", and ">" with "≤" when there is no relation.

Does "A ≥ B" follow if the chain gives A ≥ B?

Yes. A conclusion follows when it states the relation the chain gives. If the chain gives A ≥ B, the conclusions "A > B" and "A = B" do not follow on their own; together they are an either-or pair.

How do I handle coded inequality quickly?

Learn the five word translations ("not smaller than" is ≥, "neither smaller than nor equal to" is >, and so on), decode the statement into a chain on your rough sheet, and solve it as a direct question. Do not try to reason in symbols.

Is inequality asked in mains as well as prelims?

The notices do not list topics for either stage. Most practice targets prelims, where inequality is a familiar question type; if a mains paper includes it, in direct or coded form, the method is the same.

Sources

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.