Students often learn named reactions as a list, which is where a list helps least. A NEET question rarely asks "what is the Cannizzaro reaction"; it gives a reagent and a starting compound and asks for the product. To answer, you need three things for each reaction: what the substrate must have, what the reagent does, and what the product looks like.
This post lists the named reactions that matter for NEET, grouped by the chapter they belong to, and works through five past questions from the NEET papers on Pareeksha.
Which named reactions the syllabus actually names
The NMC syllabus for NEET (UG) 2026 names some reactions in its own text. These are the safest to prioritise because the syllabus points at them directly:
| Syllabus unit (NMC, NEET UG 2026) | Reactions named in the unit |
|---|---|
| Unit 15, Hydrocarbons | Friedel–Crafts alkylation and acylation, Markovnikov addition and the peroxide effect, ozonolysis |
| Unit 17, Organic compounds containing oxygen | Reimer–Tiemann reaction, Wolff–Kishner and Clemmensen reductions, aldol condensation, Cannizzaro reaction, haloform reaction, Grignard reagent |
| Unit 18, Organic compounds containing nitrogen | Diazonium salts and their importance in synthesis (Sandmeyer and coupling reactions) |
The other units ask for "general methods of preparation, properties and reactions". That wording covers the standard reactions of each chapter, such as Wurtz, Finkelstein, Williamson, Kolbe, Rosenmund, Hofmann bromamide and Gabriel synthesis. They have all been asked in NEET or AIPMT papers, so they belong on your list too. Check the syllabus published with the NEET 2027 information bulletin when it is released, since NMC can change the wording. The full unit list is on our NEET syllabus page.
How much organic chemistry the paper carries
In the 10 NEET papers from 2021 to 2026 on Pareeksha, the organic chapters carried these numbers of Chemistry questions (some digitised papers are a few questions short of the full paper):
| Chapter | Questions, 2021–2026 | Per paper, 2016–2020 | Per paper, 2021–2026 |
|---|---|---|---|
| Aldehydes, Ketones and Carboxylic Acids | 24 | 0.75 | 2.40 |
| Hydrocarbons | 15 | 1.25 | 1.50 |
| Organic Chemistry: Some Basic Principles | 14 | 0.50 | 1.40 |
| Amines | 12 | 0.75 | 1.20 |
| Alcohols, Phenols and Ethers | 10 | 0.62 | 1.00 |
| Haloalkanes and Haloarenes | 7 | 0.25 | 0.70 |
Aldehydes, Ketones and Carboxylic Acids rose the most of any Chemistry chapter between the two periods, and it is the chapter with the most named reactions. The full table is on the chapter-wise weightage page.
Hydrocarbons
| Reaction | What goes in | What comes out | What NEET tests |
|---|---|---|---|
| Friedel–Crafts alkylation | Benzene + R–Cl, anhydrous $\mathrm{AlCl_3}$ | Alkylbenzene | The carbocation can rearrange, and the product is more reactive than benzene, so polyalkylation happens |
| Friedel–Crafts acylation | Benzene + RCOCl, anhydrous $\mathrm{AlCl_3}$ | Aryl ketone | No rearrangement; the acyl group deactivates the ring, so it stops at one substitution |
| Markovnikov addition | Unsymmetrical alkene + HX | H goes to the carbon that already has more H | Propene + HBr gives 2-bromopropane |
| Peroxide (Kharasch) effect | Unsymmetrical alkene + HBr + peroxide | Anti-Markovnikov product | Works only with HBr, not with HCl or HI |
| Ozonolysis | Alkene + $\mathrm{O_3}$, then Zn/$\mathrm{H_2O}$ | Two carbonyl compounds | Working backwards from products to the alkene |
| Wurtz reaction | 2 R–X + 2 Na in dry ether | R–R | Gives alkanes with an even number of carbons; with two different halides you get a mixture |
Friedel–Crafts reactions fail on rings that carry strongly deactivating groups such as $-\mathrm{NO_2}$, and they fail on aniline, because the basic $-\mathrm{NH_2}$ ties up the $\mathrm{AlCl_3}$. That last fact was asked in both NEET 2024 sittings.
Haloalkanes and haloarenes
| Reaction | Reagent | Result |
|---|---|---|
| Finkelstein | NaI in dry acetone | R–Cl or R–Br becomes R–I; NaCl or NaBr precipitates, which drives the reaction forward |
| Swarts | AgF, $\mathrm{Hg_2F_2}$, $\mathrm{CoF_2}$ or $\mathrm{SbF_3}$ | Alkyl fluorides from alkyl chlorides or bromides |
| Wurtz–Fittig | Ar–X + R–X + Na in dry ether | Alkylbenzene |
| Fittig | 2 Ar–X + 2 Na in dry ether | Biphenyl |
The concepts behind this chapter matter more than its named reactions: $S_N2$ goes with inversion of configuration, $S_N1$ goes through a planar carbocation and gives racemisation, and elimination follows Saytzeff's rule (the more substituted alkene is the major product). NEET 2020 and 2021 both asked about the elimination of 2-bromopentane, which gives pent-2-ene by Saytzeff's rule.
Alcohols, phenols and ethers
| Reaction | What goes in | What comes out |
|---|---|---|
| Reimer–Tiemann | Phenol + $\mathrm{CHCl_3}$ + aqueous NaOH, then acid | Salicylaldehyde (2-hydroxybenzaldehyde) |
| Kolbe's reaction | Sodium phenoxide + $\mathrm{CO_2}$ under pressure, then acid | Salicylic acid (2-hydroxybenzoic acid) |
| Williamson synthesis | Alkyl halide + sodium alkoxide | Ether |
| Ether cleavage | Anisole + HI | Phenol + $\mathrm{CH_3I}$ |
Two traps sit here. In Williamson synthesis the alkyl halide must be primary: a tertiary halide with an alkoxide gives an alkene by elimination. To make tert-butyl methyl ether, use sodium tert-butoxide with methyl bromide, not the other way round. In the cleavage of anisole, the iodide attacks the methyl carbon, because the phenyl–oxygen bond has partial double-bond character. So the products are phenol and methyl iodide, never iodobenzene. That exact question was asked in NEET 2020.
Aldehydes, ketones and carboxylic acids
This is where most of the named reactions live.
| Reaction | Substrate condition | Reagent | Product |
|---|---|---|---|
| Rosenmund reduction | Acid chloride | $\mathrm{H_2}$, Pd on $\mathrm{BaSO_4}$ (poisoned) | Aldehyde |
| Stephen reduction | Nitrile | $\mathrm{SnCl_2}$/HCl, then $\mathrm{H_3O^+}$ | Aldehyde |
| Etard reaction | Toluene | Chromyl chloride, then $\mathrm{H_3O^+}$ | Benzaldehyde |
| Gattermann–Koch | Benzene | CO + HCl, anhydrous $\mathrm{AlCl_3}$/CuCl | Benzaldehyde |
| Clemmensen reduction | Aldehyde or ketone | Zn–Hg, conc. HCl | $\mathrm{C{=}O}$ becomes $\mathrm{CH_2}$ |
| Wolff–Kishner reduction | Aldehyde or ketone | $\mathrm{NH_2NH_2}$, then KOH in ethylene glycol, heat | $\mathrm{C{=}O}$ becomes $\mathrm{CH_2}$ |
| Aldol condensation | Must have an α-hydrogen | Dilute NaOH | β-Hydroxy aldehyde or ketone; on heating, an α,β-unsaturated compound |
| Cannizzaro reaction | Must have no α-hydrogen | Concentrated NaOH | One molecule reduced to alcohol, one oxidised to carboxylate salt |
| Haloform reaction | Methyl ketone ($\mathrm{CH_3CO-}$) or $\mathrm{CH_3CH(OH)-}$ group | NaOX (or $\mathrm{X_2}$ + NaOH) | $\mathrm{CHX_3}$ + carboxylate with one carbon fewer |
| Hell–Volhard–Zelinsky | Carboxylic acid with an α-hydrogen | $\mathrm{X_2}$, red phosphorus | α-Halo acid |
| Decarboxylation | Sodium salt of an acid | NaOH + CaO (soda lime), heat | Alkane with one carbon fewer |
The α-hydrogen rule decides between aldol and Cannizzaro, and it is the most tested single fact in this chapter. Ethanal and propanone have α-hydrogens and undergo aldol reactions. Methanal and benzaldehyde have none, so with concentrated alkali they undergo Cannizzaro. In a crossed Cannizzaro reaction with methanal, methanal is the one oxidised (to formate), because it is the more reactive aldehyde.
Clemmensen works in acid and Wolff–Kishner in base. If a molecule has a group that would not survive strong acid, the base route is the one to use, and that is how NEET frames the choice.
Amines and diazonium salts
| Reaction | What goes in | What comes out | Key point |
|---|---|---|---|
| Hofmann bromamide degradation | Amide + $\mathrm{Br_2}$ + NaOH | Primary amine | One carbon fewer than the amide |
| Gabriel phthalimide synthesis | Potassium phthalimide + alkyl halide, then hydrolysis | Primary aliphatic amine | Cannot make aniline: aryl halides do not undergo the substitution |
| Carbylamine test | Primary amine + $\mathrm{CHCl_3}$ + alcoholic KOH | Isocyanide, foul smell | Only primary amines, aliphatic or aromatic |
| Diazotisation | Aniline + $\mathrm{NaNO_2}$ + HCl at 273–278 K | Benzenediazonium chloride | Must be kept cold |
| Sandmeyer | Diazonium salt + $\mathrm{Cu_2Cl_2}$/HCl, $\mathrm{Cu_2Br_2}$/HBr or CuCN/KCN | Ar–Cl, Ar–Br or Ar–CN | Cu(I) salts |
| Gattermann | Diazonium salt + Cu powder + HX | Ar–Cl or Ar–Br | Copper metal instead of Cu(I) salt |
| Coupling | Diazonium salt + phenol (alkaline) or aniline (mildly acidic) | Azo dyes | With phenol, p-hydroxyazobenzene (orange); with aniline, p-aminoazobenzene (aniline yellow) |
Aniline yellow also appears in Unit 20 of the syllabus as one of the compounds whose preparation you should understand. Our practical chemistry guide covers that unit.
Five NEET past questions, solved
1. NEET (UG) 2026 Re-exam, Q46. For the following reaction sequence, choose the correct option: Benzene $\xrightarrow[\text{ii. NaOCl}]{\text{i. }\mathrm{CH_3COCl,\ AlCl_3}}$ P + Q
(A) If P is the sodium salt of a carboxylic acid, Q is a primary alcohol. (B) P and Q are aromatic compounds. (C) If P gives a carboxylic acid on acidification, Q gives a poisonous gas on exposure to air and light. (D) Both P and Q are carbonyl compounds.
Official answer: (C). Friedel–Crafts acylation gives acetophenone, a methyl ketone. NaOCl then runs the haloform reaction: the methyl group leaves as chloroform and the rest becomes sodium benzoate. Sodium benzoate gives benzoic acid with acid, and chloroform is slowly oxidised in air and light to phosgene, $\mathrm{COCl_2}$. Two named reactions in one question is now a common pattern. See the paper.
2. NEET (UG) 2023 Manipur, Q91. Consider the given reaction: $\mathrm{CH_3COCH_3} \xrightarrow{\text{dil } \mathrm{Ba(OH)_2}}$ "X". The functional groups present in compound "X" are:
(A) ketone and double bond (B) double bond and aldehyde (C) alcohol and aldehyde (D) alcohol and ketone
Official answer: (D). Acetone has α-hydrogens, so dilute base gives an aldol reaction. The product, diacetone alcohol, $\mathrm{(CH_3)_2C(OH)CH_2COCH_3}$, has a tertiary alcohol and a ketone. It loses water only on heating. If you jumped straight to the condensation product you would pick (A).
3. NEET (UG) 2023, Q54. Identify the product in the following reaction: Benzenediazonium chloride ($\mathrm{C_6H_5N_2^+Cl^-}$) $\xrightarrow{\text{(i) } \mathrm{Cu_2Br_2/HBr};\ \text{(ii) Mg/dry ether};\ \text{(iii) } \mathrm{H_2O}}$ Product
(A) Phenol (B) Benzene (C) Phenylmagnesium bromide ($\mathrm{C_6H_5MgBr}$) (D) 4-Bromophenol
Official answer: (B). Sandmeyer gives bromobenzene, Mg in dry ether gives phenylmagnesium bromide, and water protonates the Grignard reagent to benzene. Option (C) is the intermediate, placed there to catch students who stop one step early. See the paper.
4. NEET (UG) 2022, Q122. Compound X on reaction with $\mathrm{O_3}$ followed by Zn/$\mathrm{H_2O}$ gives formaldehyde and 2-methyl propanal as products. The compound X is
(A) 3-Methylbut-1-ene (B) 2-Methylbut-1-ene (C) 2-Methylbut-2-ene (D) Pent-2-ene
Official answer: (A). Join the two carbonyl carbons with a double bond: $\mathrm{CH_2{=}}$ from formaldehyde and $\mathrm{{=}CH{-}CH(CH_3)_2}$ from 2-methylpropanal give $\mathrm{CH_2{=}CH{-}CH(CH_3)_2}$, which is 3-methylbut-1-ene.
5. NEET (UG) 2022 Phase 2, Q115. Match the reagents (List-I) with the product (List-II) obtained from phenol.
| List-I | List-II |
|---|---|
| (a) (i) NaOH (ii) $\mathrm{CO_2}$ (iii) $\mathrm{H^+}$ | (i) Benzoquinone |
| (b) (i) Aqueous NaOH + $\mathrm{CHCl_3}$ (ii) $\mathrm{H^+}$ | (ii) Benzene |
| (c) Zn dust, $\Delta$ | (iii) Salicyl aldehyde |
| (d) $\mathrm{Na_2Cr_2O_7}$, $\mathrm{H_2SO_4}$ | (iv) Salicylic acid |
(A) (a)-(iv), (b)-(ii), (c)-(i), (d)-(iii) (B) (a)-(iii), (b)-(iv), (c)-(i), (d)-(ii) (C) (a)-(ii), (b)-(i), (c)-(iv), (d)-(iii) (D) (a)-(iv), (b)-(iii), (c)-(ii), (d)-(i)
Official answer: (D). Kolbe's reaction gives salicylic acid, Reimer–Tiemann gives salicylaldehyde, zinc dust removes the oxygen to give benzene, and dichromate oxidises phenol to benzoquinone. Kolbe and Reimer–Tiemann are the pair students mix up most: $\mathrm{CO_2}$ gives the acid, $\mathrm{CHCl_3}$ gives the aldehyde.
How to learn named reactions so they stay
- Learn the condition, not just the product. For every reaction, write one line on what the substrate must have: an α-hydrogen, no α-hydrogen, a methyl ketone, a primary halide, a primary amine. Most wrong options break exactly that condition.
- Write the reverse question. Cover the reagent column and work it out from the starting compound and the product. NEET conversion questions are built this way; our organic conversions and reagents guide covers them.
- Count carbons. Decarboxylation, Hofmann bromamide and the haloform reaction each remove one carbon. Wurtz doubles the chain. A carbon count rules out options in seconds.
- Practise from past papers, chapter by chapter. The chapter posts list solved questions: Aldehydes, Ketones and Carboxylic Acids, Amines, Alcohols, Phenols and Ethers, Hydrocarbons and Haloalkanes and Haloarenes. All 51 NEET and AIPMT papers are on the past-paper page.
For reading, the study book Organic Compounds with Halogen, Oxygen and Nitrogen covers four of these chapters, with the carbonyl chapter at chapter 3; hydrocarbons are in Organic Basics and Hydrocarbons. Each chapter also has a 15-question, 15-minute test in the NEET section of your dashboard at /dashboard/exams/neet-ug (login needed). For the overall plan for the subject, read our NEET Chemistry preparation strategy.
Frequently asked questions
How many named reactions do I need for NEET?
Around 30 to 35 cover what NEET has asked. The NMC 2026 syllabus names about a dozen directly (Friedel–Crafts, Markovnikov and the peroxide effect, ozonolysis, Reimer–Tiemann, Clemmensen, Wolff–Kishner, aldol, Cannizzaro, haloform and the diazonium reactions). The rest are standard reactions within the chapters' "methods of preparation and properties".
Do I need to know mechanisms or only products?
Know the mechanisms the syllabus mentions: electrophilic addition to alkenes, electrophilic aromatic substitution, $S_N1$ and $S_N2$, nucleophilic addition to the carbonyl group and the dehydration of alcohols. For the other named reactions, knowing the substrate condition, reagent and product is usually enough.
Which named reactions are asked most often?
From the questions in our data, the carbonyl reactions lead: aldol, Cannizzaro, haloform and the two reductions. Diazonium chemistry and the Kolbe and Reimer–Tiemann reactions of phenol come next. Aldehydes, Ketones and Carboxylic Acids had 24 questions in the 10 NEET papers from 2021 to 2026 on Pareeksha, the joint highest of any Chemistry chapter.
What is the difference between Kolbe's reaction and Kolbe electrolysis?
Kolbe's reaction is the reaction of sodium phenoxide with carbon dioxide, which gives salicylic acid after acidification. Kolbe electrolysis is the electrolysis of an aqueous sodium or potassium salt of a carboxylic acid, which joins two alkyl groups to give an alkane. They share a name and nothing else.
Why does benzaldehyde give the Cannizzaro reaction but not the aldol reaction?
The aldol reaction needs a hydrogen on the carbon next to the carbonyl group, because the base removes it to form the enolate. Benzaldehyde has no such hydrogen; its carbonyl carbon is attached directly to the ring. With concentrated alkali it therefore undergoes the Cannizzaro reaction instead, giving benzyl alcohol and benzoate.

Comments (0)
No comments yet. Be the first to share your thoughts.