Unit 20 of the NEET Chemistry syllabus, Principles Related to Practical Chemistry, is the newest unit to show up in the paper, and many students still skip it because they assume "practical" means something you do in a lab, not something you are examined on. The past papers say otherwise. In the NEET papers on Pareeksha, this chapter had no questions in 2016–2020 and 10 questions in 2021–2026: 5 across the two 2024 sittings, 1 in 2025 and 4 across the two 2026 sittings. Some digitised papers are a few questions short, so the true counts may be slightly higher.
The questions are short and factual. This post goes through everything the unit lists, in the syllabus's own order.
What Unit 20 covers
We checked the unit against the NMC syllabus for NEET (UG) 2026 (the notified document reproduced on neet.nta.nic.in). It lists:
- Detection of extra elements (nitrogen, sulphur, halogens) in organic compounds.
- Detection of functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl and amino groups.
- The chemistry involved in preparing two inorganic compounds (Mohr's salt and potash alum) and four organic compounds (acetanilide, p-nitroacetanilide, aniline yellow and iodoform).
- The chemistry of titrations: acids and bases with indicators, oxalic acid against $\mathrm{KMnO_4}$, and Mohr's salt against $\mathrm{KMnO_4}$.
- Qualitative salt analysis. Cations: $\mathrm{Pb^{2+}}$, $\mathrm{Cu^{2+}}$, $\mathrm{Al^{3+}}$, $\mathrm{Fe^{3+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{Ni^{2+}}$, $\mathrm{Ca^{2+}}$, $\mathrm{Ba^{2+}}$, $\mathrm{Mg^{2+}}$, $\mathrm{NH_4^+}$. Anions: $\mathrm{CO_3^{2-}}$, $\mathrm{S^{2-}}$, $\mathrm{SO_4^{2-}}$, $\mathrm{NO_3^-}$, $\mathrm{NO_2^-}$, $\mathrm{Cl^-}$, $\mathrm{Br^-}$, $\mathrm{I^-}$. Insoluble salts are excluded.
- The principles of four experiments: enthalpy of solution of copper sulphate, enthalpy of neutralisation of a strong acid by a strong base, preparation of lyophilic and lyophobic sols, and the kinetics of the reaction of iodide ions with hydrogen peroxide at room temperature.
Check the unit text again in the NEET 2027 information bulletin's syllabus when it is published. Our syllabus page lists all Chemistry units.
1. Detecting nitrogen, sulphur and halogens
Nitrogen, sulphur and halogens in an organic compound are covalently bonded and cannot be tested directly. Fusing the compound with sodium (Lassaigne's test) converts them into ionic sodium salts, which dissolve in water to give the sodium fusion extract.
| Element | Test on the extract | Positive result |
|---|---|---|
| Nitrogen | Boil with $\mathrm{FeSO_4}$, then acidify with conc. $\mathrm{H_2SO_4}$ | Prussian blue, $\mathrm{Fe_4[Fe(CN)_6]_3}$ |
| Sulphur | Sodium nitroprusside | Violet colour |
| Sulphur | Acetic acid, then lead acetate | Black precipitate of PbS |
| N and S together | $\mathrm{Fe^{3+}}$ (gives thiocyanate complex) | Blood-red colour |
| Halogens | Boil with $\mathrm{HNO_3}$, then add $\mathrm{AgNO_3}$ | AgCl white (soluble in ammonia), AgBr pale yellow (sparingly soluble), AgI yellow (insoluble) |
Boiling with nitric acid first removes cyanide and sulphide, which would otherwise also precipitate with silver nitrate.
2. Functional group tests
| Group | Test | Positive result |
|---|---|---|
| Alcoholic –OH | Ceric ammonium nitrate | Red colour |
| Alcoholic –OH (type) | Lucas reagent (conc. HCl + anhydrous $\mathrm{ZnCl_2}$) | Tertiary: turbidity at once; secondary: within about five minutes; primary: none at room temperature |
| Phenolic –OH | Neutral $\mathrm{FeCl_3}$ | Violet colour (with phenol) |
| Phenolic –OH | Phthalein dye test (heat with phthalic anhydride and conc. $\mathrm{H_2SO_4}$, add to NaOH) | Pink to red colour |
| Phenolic –OH | Bromine water | White precipitate |
| Carbonyl (both) | 2,4-Dinitrophenylhydrazine | Yellow-orange precipitate |
| Aldehyde | Tollens' reagent | Silver mirror |
| Aldehyde (aliphatic) | Fehling's solution | Red precipitate of $\mathrm{Cu_2O}$ |
| Aldehyde | Schiff's reagent | Pink colour |
| Methyl ketone | Iodoform test | Yellow precipitate of $\mathrm{CHI_3}$ |
| Carboxyl | Sodium hydrogencarbonate | Brisk effervescence of $\mathrm{CO_2}$ |
| Primary amine | Carbylamine test ($\mathrm{CHCl_3}$ + alcoholic KOH) | Foul-smelling isocyanide |
| Aromatic primary amine | Azo dye test (diazotise, couple with alkaline β-naphthol) | Orange-red dye |
Fehling's solution A is aqueous copper sulphate and solution B is alkaline sodium potassium tartrate; NEET 2024 asked which is which. Benzaldehyde gives Tollens' test but not Fehling's.
3. The preparations
| Compound | Formula or reaction | Point that gets asked |
|---|---|---|
| Mohr's salt | $\mathrm{FeSO_4\cdot(NH_4)_2SO_4\cdot 6H_2O}$, from equimolar ferrous sulphate and ammonium sulphate | A little dilute $\mathrm{H_2SO_4}$ is added to stop hydrolysis of $\mathrm{Fe^{2+}}$ |
| Potash alum | $\mathrm{K_2SO_4\cdot Al_2(SO_4)_3\cdot 24H_2O}$, from equimolar potassium sulphate and aluminium sulphate | Dilute $\mathrm{H_2SO_4}$ stops hydrolysis of $\mathrm{Al^{3+}}$; it is a double salt |
| Acetanilide | Aniline + acetic anhydride (acetylation) | Protects the amino group |
| p-Nitroacetanilide | Nitration of acetanilide with conc. $\mathrm{HNO_3}$ + conc. $\mathrm{H_2SO_4}$, kept cold | Para product is major; the acetyl group prevents oxidation and over-reaction |
| Aniline yellow | Benzenediazonium chloride coupled with aniline | Product is p-aminoazobenzene, a yellow azo dye |
| Iodoform | Ethanol or acetone + iodine + alkali | Yellow crystals; the haloform reaction |
Both double salts give the ions of their components in solution. The 2026 re-exam asked for the ratio of $\mathrm{K^+}$ to $\mathrm{SO_4^{2-}}$ in potash alum (1 : 2), a question you answer from the formula alone. The organic preparations are linked to the reactions in our named reactions guide.
4. Titrations
Acid–base indicators.
| Titration | Indicator | Why |
|---|---|---|
| Strong acid vs strong base | Phenolphthalein or methyl orange | The pH jump at the end point is large and covers both ranges |
| Weak acid vs strong base (oxalic acid vs NaOH) | Phenolphthalein (pH 8.2–10; colourless to pink) | End point is slightly basic |
| Strong acid vs weak base | Methyl orange (pH 3.1–4.4) | End point is slightly acidic |
Permanganate titrations. $\mathrm{KMnO_4}$ is its own indicator: the first drop in excess turns the solution light pink. The medium is dilute $\mathrm{H_2SO_4}$. Hydrochloric acid is not used because permanganate oxidises chloride to chlorine, and nitric acid is not used because it is itself an oxidising agent.
$\mathrm{2MnO_4^- + 5C_2O_4^{2-} + 16H^+ \rightarrow 2Mn^{2+} + 10CO_2 + 8H_2O}$
$\mathrm{MnO_4^- + 5Fe^{2+} + 8H^+ \rightarrow Mn^{2+} + 5Fe^{3+} + 4H_2O}$
Oxalic acid is warmed to about 60 °C before titration because the reaction is slow at room temperature; once some $\mathrm{Mn^{2+}}$ forms, it catalyses the reaction (autocatalysis). Mohr's salt is titrated at room temperature, because heating would let air oxidise the $\mathrm{Fe^{2+}}$.
Worked example. 20 mL of 0.1 M Mohr's salt needs how much 0.02 M $\mathrm{KMnO_4}$? Moles of $\mathrm{Fe^{2+}}$ = $0.1 \times 0.020 = 2 \times 10^{-3}$. One permanganate takes five $\mathrm{Fe^{2+}}$, so moles of $\mathrm{KMnO_4} = 4 \times 10^{-4}$, and the volume is $\frac{4 \times 10^{-4}}{0.02} = 0.020$ L, that is 20 mL.
5. Qualitative salt analysis
Anions.
| Anion | Preliminary test | Confirmatory observation |
|---|---|---|
| $\mathrm{CO_3^{2-}}$ | Dilute $\mathrm{H_2SO_4}$: brisk effervescence | Colourless, odourless gas turns lime water milky |
| $\mathrm{S^{2-}}$ | Dilute $\mathrm{H_2SO_4}$: rotten-egg smell ($\mathrm{H_2S}$) | Lead acetate paper turns black; violet colour with sodium nitroprusside |
| $\mathrm{NO_2^-}$ | Dilute $\mathrm{H_2SO_4}$: brown fumes | Brown fumes of $\mathrm{NO_2}$ |
| $\mathrm{Cl^-}$ | Conc. $\mathrm{H_2SO_4}$: colourless HCl gas, white fumes with an ammonia rod | White AgCl soluble in ammonia; chromyl chloride test |
| $\mathrm{Br^-}$ | Conc. $\mathrm{H_2SO_4}$: reddish-brown vapours | Pale yellow AgBr, sparingly soluble in ammonia |
| $\mathrm{I^-}$ | Conc. $\mathrm{H_2SO_4}$: violet vapours | Yellow AgI, insoluble in ammonia |
| $\mathrm{NO_3^-}$ | Conc. $\mathrm{H_2SO_4}$ with copper turnings: brown fumes | Brown ring test: brown ring of $\mathrm{[Fe(H_2O)_5(NO)]^{2+}}$ |
| $\mathrm{SO_4^{2-}}$ | No group reagent | White $\mathrm{BaSO_4}$ with $\mathrm{BaCl_2}$, insoluble in conc. HCl or $\mathrm{HNO_3}$ |
Cations. Cations are separated into groups by group reagents, always in order:
| Group | Cations (from the syllabus list) | Group reagent | Precipitate |
|---|---|---|---|
| 0 | $\mathrm{NH_4^+}$ | None; warm with NaOH | $\mathrm{NH_3}$ gas; brown precipitate with Nessler's reagent |
| I | $\mathrm{Pb^{2+}}$ | Dilute HCl | White $\mathrm{PbCl_2}$, soluble in hot water |
| II | $\mathrm{Cu^{2+}}$ | $\mathrm{H_2S}$ in dilute HCl | Black CuS |
| III | $\mathrm{Al^{3+}}$, $\mathrm{Fe^{3+}}$ | $\mathrm{NH_4OH}$ with $\mathrm{NH_4Cl}$ | White gelatinous $\mathrm{Al(OH)_3}$; reddish-brown $\mathrm{Fe(OH)_3}$ |
| IV | $\mathrm{Zn^{2+}}$, $\mathrm{Ni^{2+}}$ | $\mathrm{H_2S}$ in ammoniacal solution | White ZnS; black NiS |
| V | $\mathrm{Ca^{2+}}$, $\mathrm{Ba^{2+}}$ | $\mathrm{(NH_4)_2CO_3}$ with $\mathrm{NH_4OH}$ and $\mathrm{NH_4Cl}$ | White carbonates |
| VI | $\mathrm{Mg^{2+}}$ | None | White precipitate with disodium hydrogen phosphate |
Two "why" questions keep coming up. Why dilute HCl in group II? The $\mathrm{H^+}$ from HCl suppresses the ionisation of $\mathrm{H_2S}$ (common ion effect), keeping $[\mathrm{S^{2-}}]$ low, so only the very insoluble group II sulphides precipitate. Why $\mathrm{NH_4Cl}$ in group III? The $\mathrm{NH_4^+}$ suppresses the ionisation of $\mathrm{NH_4OH}$, keeping $[\mathrm{OH^-}]$ low, so only the group III hydroxides (very low $K_{sp}$) precipitate and $\mathrm{Mg(OH)_2}$ and the group IV hydroxides stay in solution. In group IV the ammoniacal medium does the opposite, raising $[\mathrm{S^{2-}}]$ so that ZnS and NiS can precipitate.
Confirmatory tests worth knowing: $\mathrm{Cu^{2+}}$ gives a deep blue solution with excess ammonia; $\mathrm{Fe^{3+}}$ gives Prussian blue with potassium ferrocyanide and blood-red with thiocyanate; $\mathrm{Ni^{2+}}$ gives a red precipitate with dimethylglyoxime; $\mathrm{Pb^{2+}}$ gives yellow $\mathrm{PbI_2}$ with KI; $\mathrm{Ba^{2+}}$ gives yellow $\mathrm{BaCrO_4}$ with potassium chromate and an apple-green flame; $\mathrm{Ca^{2+}}$ gives white calcium oxalate and a brick-red flame.
Note that NEET 2024 and NEET 2025 both asked for the analytical group of $\mathrm{Co^{2+}}$ (group IV), which is not in the syllabus's cation list. Learn the standard group positions of $\mathrm{Co^{2+}}$ and $\mathrm{Mn^{2+}}$ (both group IV) as well.
6. The four experiments
- Enthalpy of solution of copper sulphate. Dissolve a known mass in a known volume of water in a calorimeter and record the temperature change; heat $q = mc\Delta T$, then divide by moles. Anhydrous copper sulphate releases heat on dissolving; the hydrated salt absorbs a little.
- Enthalpy of neutralisation. For any strong acid with any strong base it is close to −57 kJ per mole of water formed, because the reaction is always $\mathrm{H^+ + OH^- \rightarrow H_2O}$. With a weak acid or base the value is less negative, since some energy goes into ionising it.
- Lyophilic and lyophobic sols. Lyophilic sols (starch, gum, gelatin, egg albumin) form by simply warming the substance with water. Lyophobic sols need special methods: ferric hydroxide sol by adding ferric chloride to boiling water (hydrolysis), arsenious sulphide sol by passing $\mathrm{H_2S}$ through arsenious oxide solution. Surface Chemistry as a whole chapter is marked "old syllabus" in our data (see the dropped chapters list), but these two preparations are still in Unit 20.
- Iodide and hydrogen peroxide. $\mathrm{H_2O_2 + 2I^- + 2H^+ \rightarrow I_2 + 2H_2O}$. The iodine formed turns starch blue; a small, fixed amount of thiosulphate added at the start delays the colour until it is used up, so the time taken measures the rate. Changing $[\mathrm{I^-}]$ or $[\mathrm{H_2O_2}]$ and timing the colour gives the order of the reaction.
Four NEET past questions, solved
1. NEET (UG) 2026 Re-exam, Q57. In an acidic medium, 10 mL of 0.25 M oxalic acid is titrated with $\mathrm{KMnO_4}$ solution. If the volume of $\mathrm{KMnO_4}$ solution required to reach end point is 10 mL, the strength of the $\mathrm{KMnO_4}$ solution is
(A) $0.10$ M (B) $0.20$ M (C) $0.25$ M (D) $0.15$ M
Official answer: (A). Moles of oxalic acid = $2.5 \times 10^{-3}$. The ratio is 2 permanganate to 5 oxalate, so permanganate = $1.0 \times 10^{-3}$ mol in 10 mL, 0.10 M. Option (C) assumes a 1 : 1 ratio. See the paper.
2. NEET (UG) 2025, Q48. Match List I with List II List I (Ion): A. $\mathrm{Co^{2+}}$ B. $\mathrm{Mg^{2+}}$ C. $\mathrm{Pb^{2+}}$ D. $\mathrm{Al^{3+}}$ List II (Group Number in Cation Analysis): I. Group-I II. Group-III III. Group-IV IV. Group-VI
(A) A-III, B-IV, C-II, D-I (B) A-III, B-IV, C-I, D-II (C) A-III, B-II, C-IV, D-I (D) A-III, B-II, C-I, D-IV
Official answer: (B). Cobalt in group IV, magnesium in group VI, lead in group I, aluminium in group III. See the paper.
3. NEET (UG) 2024 Re-exam, Q107. Which indicator is used in the titration of sodium hydroxide against oxalic acid and what is the colour change at the end point?
(A) Phenolphthalein, pink to yellow (B) Alkaline $\mathrm{KMnO_4}$, colourless to pink (C) Phenolphthalein, colourless to pink (D) Methyl orange, yellow to pinkish red colour
Official answer: (C). A weak acid against a strong base needs phenolphthalein; with the acid in the flask the colour goes from colourless to pink. See the paper.
4. NEET (UG) 2026 (cancelled May sitting), Q114. The functional group that can be identified through phthalein dye test is :
(A) Aldehyde (B) Phenolic (C) Carboxylic acid (D) Alcohol
Official answer: (B). Phenols condense with phthalic anhydride to give phthalein dyes, which are coloured in alkali. See the paper.
How to study Unit 20
- Make four tables (element tests, functional group tests, anions, cations) and learn the colours.
- Learn the reason behind each reagent choice (why $\mathrm{NH_4Cl}$, why dilute HCl, why warm oxalic acid). These become statement questions.
- Practise titration calculations; they are mole-ratio problems, as in our physical chemistry numericals guide.
- Use the chapter material. The Principles Related to Practical Chemistry PYQ post has more solved questions, and detection of elements also appears in Purification and Characterisation of Organic Compounds. The study chapter is Biomolecules and Practical Chemistry, chapter 2 (also in Hindi and Telugu), and a 15-question chapter test is at /dashboard/exams/neet-ug (login needed).
The NEET Pass (₹199 for a year) includes all NEET books and tests; the free 10-question mini mock needs no sign-up to start. For where Unit 20 sits among all Chemistry chapters by weight, see the weightage page.
Frequently asked questions
Is practical chemistry in the NEET syllabus?
Yes. Unit 20 of the NMC syllabus for NEET (UG) 2026, Principles Related to Practical Chemistry, covers detection of elements and functional groups, preparation of six compounds, titrations, salt analysis for ten cations and eight anions, and four experiments. In the NEET papers on Pareeksha it had 10 questions across 2024–2026.
Which cations and anions are in the NEET salt analysis syllabus?
Cations: $\mathrm{Pb^{2+}}$, $\mathrm{Cu^{2+}}$, $\mathrm{Al^{3+}}$, $\mathrm{Fe^{3+}}$, $\mathrm{Zn^{2+}}$, $\mathrm{Ni^{2+}}$, $\mathrm{Ca^{2+}}$, $\mathrm{Ba^{2+}}$, $\mathrm{Mg^{2+}}$ and $\mathrm{NH_4^+}$. Anions: carbonate, sulphide, sulphate, nitrate, nitrite, chloride, bromide and iodide. Insoluble salts are excluded. Past papers have also asked the group of $\mathrm{Co^{2+}}$, so learn its position too.
Why is $\mathrm{KMnO_4}$ called a self-indicator?
Permanganate is deep purple and its reduced form, $\mathrm{Mn^{2+}}$, is almost colourless. As long as the reducing agent remains, each drop is decolourised; the first drop in excess stays pink, which marks the end point without any added indicator.
Why is oxalic acid heated before titration with permanganate?
The reaction between permanganate and oxalic acid is slow at room temperature. Warming to about 60 °C speeds it up so the end point is sharp. Once $\mathrm{Mn^{2+}}$ forms, it catalyses the reaction further.

Comments (0)
No comments yet. Be the first to share your thoughts.