LATEST
NEETBy Pareeksha Editorial Team· ⏱ 10 min read

Physical Chemistry Numericals for NEET: Fast, Safe Methods

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Physical Chemistry Numericals for NEET: Fast, Safe Methods
On this page
  1. How much of the paper this is
  2. Arithmetic you should not have to think about
  3. Some Basic Concepts: moles and significant figures
  4. Structure of Atom: Bohr model and Rydberg equation
  5. Solutions: concentration and colligative properties
  6. Chemical Kinetics: orders, half-lives and the Arrhenius equation
  7. Chemical Equilibrium: $K_p$, $K_c$ and Q
  8. Ionic Equilibrium: pH, buffers and $K_{sp}$
  9. A practice routine that works
  10. Frequently asked questions
  11. How many physical chemistry questions are there in NEET?
  12. Is a calculator allowed in NEET?
  13. What is the most common mistake in kinetics numericals?
  14. How do I get faster at numericals?
  15. Do I need to memorise values like $K_f$ of water?

Physical chemistry numericals are where many NEET aspirants lose time rather than marks. The questions are not hard, but a student who has not practised the arithmetic spends three minutes on a question that should take one. In a paper of 180 questions in 180 minutes (the pattern NTA set out in the NEET (UG) 2026 information bulletin), that difference adds up.

This post covers the numerical chapters other than electrochemistry and thermodynamics, which have their own guide. For each chapter you get the few relations that do most of the work, the trap NEET sets, and a solved past question.

How much of the paper this is

In the 10 NEET papers from 2021 to 2026 on Pareeksha, these physical chemistry chapters gave the following numbers of tagged Chemistry questions (some digitised papers are a few questions short of the full paper, and not every question in these chapters is numerical):

Chapter Questions, 2021–2026 Per paper, 2016–2020 Per paper, 2021–2026
Chemical Kinetics 18 1.50 1.80
Solutions 17 1.50 1.70
Structure of Atom 16 0.88 1.60
Some Basic Concepts of Chemistry 11 0.62 1.10
Chemical Equilibrium 10 0.50 1.00
Ionic Equilibrium 9 1.62 0.90

That is 81 questions, about eight per paper. The full table is on the chapter-wise weightage page.

Arithmetic you should not have to think about

NEET gives log values when it expects you to need them, but knowing these saves time and lets you check answers:

Quantity Value
log 2 0.301
log 3 0.477
log 5 0.699
log 7 0.845
ln 2 0.693
ln x 2.303 log x
R 8.314 J mol⁻¹ K⁻¹ = 0.0821 L atm mol⁻¹ K⁻¹ = 0.083 L bar mol⁻¹ K⁻¹ ≈ 2 cal mol⁻¹ K⁻¹

Two habits prevent most errors. First, write units on every line; the unit of R you are given tells you the unit your answer comes out in. Second, estimate before you calculate: if the options are 0.75, 1.0, 1.5 and 2.0, you do not need three decimal places.

Some Basic Concepts: moles and significant figures

Everything starts from $n = \frac{m}{M} = \frac{V}{V_m} = \frac{N}{N_A}$. Limiting reagent and percentage purity problems are just this relation used twice.

Significant figures: in multiplication and division, the answer keeps as many significant figures as the least precise number. When rounding a number that ends in exactly 5, NEET has followed the convention of leaving an even preceding digit unchanged and raising an odd one (asked in the 2026 re-exam).

NEET (UG) 2023, Q60. The right option for the mass of $\mathrm{CO_2}$ produced by heating 20 g of 20% pure limestone is (Atomic mass of Ca = 40) $\left[\mathrm{CaCO_3}\xrightarrow{1200\ \mathrm{K}}\mathrm{CaO}+\mathrm{CO_2}\right]$

(A) 1.12 g (B) 1.76 g (C) 2.64 g (D) 1.32 g

Official answer: (B). Pure $\mathrm{CaCO_3}$ = 4 g = 0.04 mol, which gives 0.04 mol of $\mathrm{CO_2}$, that is $0.04 \times 44 = 1.76$ g. The trap is forgetting the purity and using 20 g. See the paper.

NEET (UG) 2022 Phase 2, Q93. The density of the solution is 2.15 g mL⁻¹, then mass of 2.5 mL solution in correct significant figures is :

(A) 53.75 g (B) 5375 × 10⁻³ g (C) 5.4 g (D) 5.38 g

Official answer: (C). $2.15 \times 2.5 = 5.375$, but 2.5 has only two significant figures, so the answer is 5.4 g.

Structure of Atom: Bohr model and Rydberg equation

For hydrogen-like species with atomic number Z:

  • $E_n = -13.6\frac{Z^2}{n^2}$ eV
  • $r_n = 0.529\frac{n^2}{Z}$ Å
  • $\frac{1}{\lambda} = R_H Z^2\left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)$
  • de Broglie: $\lambda = \frac{h}{mv}$

For ratio questions, never calculate $R_H$. It cancels.

NEET (UG) 2025, Q46. The ratio of the wavelengths of the light absorbed by a Hydrogen atom when it undergoes $n=2\to n=3$ and $n=4\to n=6$ transitions, respectively, is

(A) $\frac{1}{36}$ (B) $\frac{1}{16}$ (C) $\frac{1}{9}$ (D) $\frac{1}{4}$

Official answer: (D). $\frac{1}{4} - \frac{1}{9} = \frac{5}{36}$ and $\frac{1}{16} - \frac{1}{36} = \frac{5}{144}$. Wavelength is inversely proportional to these, so $\frac{\lambda_1}{\lambda_2} = \frac{5/144}{5/36} = \frac{1}{4}$. Notice that the second transition is the first one with every n doubled, so the energy difference is exactly a quarter; that observation gets you there without arithmetic. See the paper.

Solutions: concentration and colligative properties

  • Molarity $M = \frac{n_{solute}}{V_{solution}\text{ (L)}}$; molality $m = \frac{n_{solute}}{\text{mass of solvent (kg)}}$. Molality does not change with temperature; molarity does.
  • Raoult's law: $p = x p^\circ$; relative lowering of vapour pressure $= x_{solute}$.
  • $\Delta T_b = i K_b m$, $\Delta T_f = i K_f m$, $\pi = iCRT$.
  • Henry's law: $p = K_H x$. A larger $K_H$ means a less soluble gas.

The van 't Hoff factor $i$ is the trap. For complete dissociation, NaCl gives 2, $\mathrm{CaCl_2}$ gives 3, $\mathrm{K_4[Fe(CN)_6]}$ gives 5. Glucose and urea give 1. Acetic acid in benzene dimerises, so $i$ falls below 1.

Worked example. Freezing point depression of 0.1 m NaCl in water ($K_f = 1.86$ K kg mol⁻¹): $\Delta T_f = 2 \times 1.86 \times 0.1 = 0.372$ K. Forgetting $i$ gives 0.186 K, which will be one of the options.

NEET (UG) 2024, Q77. The Henry's law constant ($\mathrm{K_H}$) values of three gases (A, B, C) in water are 145, $2\times10^{-5}$ and 35 kbar, respectively. The solubility of these gases in water follow the order:

(A) A > C > B (B) A > B > C (C) B > A > C (D) B > C > A

Official answer: (D). Solubility is $x = \frac{p}{K_H}$, so it runs in reverse order of $K_H$. See the paper.

Chemical Kinetics: orders, half-lives and the Arrhenius equation

Order Integrated rate law Half-life Unit of k
Zero $[A]_0 - [A] = kt$ $\frac{[A]_0}{2k}$ mol L⁻¹ s⁻¹
First $k = \frac{2.303}{t}\log\frac{[A]_0}{[A]}$ $\frac{0.693}{k}$ s⁻¹

The fastest first-order method is to count half-lives. 75% complete means 25% left, which is $(\frac{1}{2})^2$: two half-lives. 87.5% complete is three half-lives. 99.9% complete is about ten half-lives, because $2^{10} = 1024 \approx 1000$.

Arrhenius: $\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left(\frac{T_2 - T_1}{T_1T_2}\right)$. You need rate constants at two temperatures to find $E_a$ (asked in NEET 2024).

NEET (UG) 2026 Re-exam, Q60. $\mathrm{2A\xrightarrow{k}B}$ is a zero-order reaction, where $k=1.0\ \mathrm{mol\,L^{-1}\,min^{-1}}$. If the initial concentration of A is 2 M, then the time taken to complete 75% of the reaction will be

(A) $1.5$ min (B) $0.75$ min (C) $1.0$ min (D) $2.0$ min

Official answer: (B). The rate is defined per mole of reaction, $-\frac{1}{2}\frac{d[A]}{dt} = k$, so A is used up at $2k = 2.0$ mol L⁻¹ min⁻¹. 75% of 2 M is 1.5 M, so $t = 1.5/2.0 = 0.75$ min. Ignoring the stoichiometric 2 gives 1.5 min, which is option (A). See the paper.

NEET (UG) 2025, Q56. If the half-life ($t_{1/2}$) for a first order reaction is 1 minute, then the time required for 99.9% completion of the reaction is closest to :

(A) 2 minutes (B) 4 minutes (C) 5 minutes (D) 10 minutes

Official answer: (D). Ten half-lives, as above.

Chemical Equilibrium: $K_p$, $K_c$ and Q

  • $K_p = K_c(RT)^{\Delta n_g}$, where $\Delta n_g$ counts gaseous moles only. Use R in L atm or L bar to match the pressure unit.
  • At equilibrium, $K = \frac{k_f}{k_b}$.
  • Compare Q with K: if $Q > K$, the reaction moves backward; if $Q < K$, forward.
  • $\Delta G^\circ = -2.303RT\log K$.

NEET (UG) 2025, Q73. For the reaction $\mathrm{A(g)} \rightleftharpoons 2\mathrm{B(g)}$, the backward reaction rate constant is higher than the forward reaction rate constant by a factor of 2500, at 1000 K. [Given : $R = 0.0831\ \mathrm{L\,atm\,mol^{-1}K^{-1}}$] $K_p$ for the reaction at 1000 K is

(A) 83.1 (B) $2.077\times10^5$ (C) 0.033 (D) 0.021

Official answer: (C). $K_c = \frac{1}{2500} = 4 \times 10^{-4}$, $\Delta n_g = 1$, so $K_p = 4 \times 10^{-4} \times 83.1 \approx 0.033$.

Ionic Equilibrium: pH, buffers and $K_{sp}$

  • Strong acid: $\mathrm{pH} = -\log[\mathrm{H^+}]$. Weak acid: $[\mathrm{H^+}] = \sqrt{K_aC}$.
  • Buffer: $\mathrm{pH} = \mathrm{p}K_a + \log\frac{[\text{salt}]}{[\text{acid}]}$.
  • $\mathrm{pH} + \mathrm{pOH} = 14$ at 298 K.
  • $K_{sp}$: for AB, $K_{sp} = s^2$; for $\mathrm{AB_2}$ or $\mathrm{A_2B}$, $K_{sp} = 4s^3$.

Worked example. 0.1 M acetic acid with $K_a = 1.8 \times 10^{-5}$: $[\mathrm{H^+}] = \sqrt{1.8 \times 10^{-6}} \approx 1.34 \times 10^{-3}$, so pH ≈ 2.87.

The trap. For very dilute strong acids, do not forget water. $10^{-8}$ M HCl does not have pH 8; it is slightly below 7, because water's own $\mathrm{H^+}$ ($10^{-7}$ M) dominates.

NEET (UG) 2026 Re-exam, Q52. The correct order of solubility of the given salts in water at 298 K is

Salt $K_{sp}$ at 298 K
AgBr $5.0\times10^{-13}$
$\mathrm{Zn(OH)_2}$ $1.0\times10^{-15}$
$\mathrm{Hg_2Cl_2}$ $1.3\times10^{-18}$

(A) $\mathrm{Hg_2Cl_2}>\mathrm{Zn(OH)_2}>\mathrm{AgBr}$ (B) $\mathrm{AgBr}>\mathrm{Zn(OH)_2}>\mathrm{Hg_2Cl_2}$ (C) $\mathrm{Hg_2Cl_2}>\mathrm{AgBr}>\mathrm{Zn(OH)_2}$ (D) $\mathrm{Zn(OH)_2}>\mathrm{AgBr}>\mathrm{Hg_2Cl_2}$

Official answer: (D). You cannot compare $K_{sp}$ values directly across salts of different types. AgBr: $s = \sqrt{5 \times 10^{-13}} \approx 7.1 \times 10^{-7}$ M. $\mathrm{Zn(OH)_2}$: $s = \sqrt[3]{2.5 \times 10^{-16}} \approx 6.3 \times 10^{-6}$ M. $\mathrm{Hg_2Cl_2}$ dissociates into $\mathrm{Hg_2^{2+}}$ and $2\mathrm{Cl^-}$, so $s = \sqrt[3]{3.25 \times 10^{-19}} \approx 6.9 \times 10^{-7}$ M. Option (B), the order of $K_{sp}$, is the trap.

A practice routine that works

  1. Timed sets of 15 numericals, 15 minutes, three times a week. Mark each question right, wrong, or right but slow. The slow ones are where your practice should go.
  2. An error log with one line per mistake ("forgot i", "used R in J with atm", "missed stoichiometric 2"). After a month the same five lines will repeat; those are your personal traps.
  3. Solve chapter by chapter from past papers. Solved questions are in the chapter posts on Chemical Kinetics, Solutions, Structure of Atom, Chemical Equilibrium and Ionic Equilibrium. The study books are Basic Concepts, Atomic Structure and Bonding, Thermodynamics and Equilibrium and Solutions, Redox, Electrochemistry and Kinetics. Chapter tests (15 questions, 15 minutes) are at /dashboard/exams/neet-ug (login needed).

For the place of physical chemistry in your overall plan, see our NEET Chemistry preparation strategy; for the full list of units, see the Chemistry syllabus. States of Matter (gas laws as a chapter) is marked "old syllabus" in our data, though $PV = nRT$ is still used inside equilibrium and thermodynamics questions; see the dropped chapters list.

Frequently asked questions

How many physical chemistry questions are there in NEET?

In the 10 NEET papers from 2021 to 2026 on Pareeksha, the nine physical chemistry chapters in the current syllabus (including Electrochemistry, Thermodynamics and Redox) carried 120 of the 382 tagged Chemistry questions, about 31%. Not all are numerical; many test concepts such as quantum numbers or types of solutions.

Is a calculator allowed in NEET?

No. The NEET (UG) 2026 information bulletin lists calculators and log tables among the items not allowed in the exam hall, which is why NEET questions use numbers that work out by hand and supply log values when needed. Check the list of prohibited items in the NEET 2027 information bulletin when it is published.

What is the most common mistake in kinetics numericals?

Mixing up the half-life formulas for zero and first order, and ignoring stoichiometric coefficients in the rate definition. For first order, half-life does not depend on initial concentration; for zero order it is proportional to it.

How do I get faster at numericals?

Use estimation to eliminate options before calculating, learn the log values in the table above, and practise in timed sets. Speed comes from having done the same type of question many times, not from tricks.

Do I need to memorise values like $K_f$ of water?

NEET usually gives constants in the question. Knowing common ones ($K_f$ of water is 1.86 K kg mol⁻¹, $K_b$ of water is 0.52 K kg mol⁻¹, R in its different units) still helps you check your working.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.