Electrochemistry and chemical thermodynamics are taught months apart, but in the exam they are one topic. The link is a single equation, $\Delta G^\circ = -nFE^\circ_{cell}$, which ties cell potential to free energy, and free energy to the equilibrium constant. Students who see that connection solve both chapters' questions faster, and they stop making the classic mistake of adding electrode potentials directly.
This post sets out the relations that answer most questions in both chapters, the sign and unit traps, and seven solved NEET past questions.
How often they are asked
From the NEET papers on Pareeksha (some digitised papers are a few questions short, so treat the counts as close rather than exact):
| Chapter | Questions, 2016–2026 (18 sittings) | Questions, 2021–2026 (10 papers) | Per paper, 2016–2020 | Per paper, 2021–2026 |
|---|---|---|---|---|
| Electrochemistry | 26 | 16 | 1.25 | 1.60 |
| Chemical Thermodynamics | 23 | 15 | 1.00 | 1.50 |
Both rose between the two periods, and together they gave 31 of the 382 tagged Chemistry questions in 2021–2026, roughly three per paper. The 2024 sittings had 8 between them. Full figures are on the chapter-wise weightage page.
In the NMC syllabus for NEET (UG) 2026, electrochemistry is part of Unit 7 (Redox Reactions and Electrochemistry): conductance, molar conductivity and its variation with concentration, Kohlrausch's law, electrolytic and galvanic cells, electrode potentials, the Nernst equation, the relation between cell potential and Gibbs energy, the dry cell, the lead accumulator and fuel cells. Thermodynamics is Unit 4: system and surroundings, state functions, the first law, heat capacity, Hess's law, enthalpies of different processes, and the second law with $\Delta S$ and $\Delta G$ as criteria for spontaneity and the link between $\Delta G^\circ$ and the equilibrium constant. Our syllabus page lists all the units.
The bridge between the two chapters
| Relation | Use |
|---|---|
| $\Delta G^\circ = -nFE^\circ_{cell}$ | Cell potential to free energy |
| $\Delta G^\circ = -2.303RT\log K$ | Free energy to equilibrium constant |
| $\log K = \frac{nE^\circ_{cell}}{0.0591}$ at 298 K | Cell potential straight to K |
| $\Delta G = \Delta H - T\Delta S$ | Enthalpy and entropy to free energy |
A positive $E^\circ_{cell}$ means negative $\Delta G^\circ$, a spontaneous cell reaction and K greater than 1. Those four statements always go together.
Electrochemistry
Cell potential and the Nernst equation
$E^\circ_{cell} = E^\circ_{cathode} - E^\circ_{anode}$, using standard reduction potentials for both.
At 298 K, for a cell reaction with n electrons and reaction quotient Q:
$E_{cell} = E^\circ_{cell} - \frac{0.0591}{n}\log Q$
Worked example. For the Daniell cell, $\mathrm{Zn | Zn^{2+}(0.1\ M) || Cu^{2+}(1\ M) | Cu}$, with $E^\circ_{cell} = 1.10$ V: $Q = \frac{[\mathrm{Zn^{2+}}]}{[\mathrm{Cu^{2+}}]} = 0.1$, so $E = 1.10 - \frac{0.0591}{2}\log 0.1 = 1.10 + 0.0296 \approx 1.13$ V. $\Delta G^\circ = -2 \times 96500 \times 1.10 \approx -212$ kJ mol⁻¹.
The trap: electrode potentials do not add
Electrode potential is an intensive property. You cannot add two half-cell potentials to get a third. Convert each to $\Delta G^\circ$ (which is extensive and does add), combine, and convert back. The 2026 re-exam tested exactly this; see question 2 below.
Faraday's laws
Mass deposited $= \frac{Q \times M}{n \times F}$, with $Q = It$ in coulombs and $F \approx 96500$ C mol⁻¹. The number of faradays needed equals the moles of electrons transferred: 5 F per mole of $\mathrm{MnO_4^-}$ reduced to $\mathrm{Mn^{2+}}$, 2 F per mole of Ca from molten $\mathrm{CaCl_2}$.
Conductance
- Cell constant $G^* = \frac{l}{A}$; conductivity $\kappa = \frac{G^*}{R}$.
- Molar conductivity $\Lambda_m = \frac{\kappa \times 1000}{C}$ (κ in S cm⁻¹, C in mol L⁻¹, $\Lambda_m$ in S cm² mol⁻¹).
- Conductivity falls on dilution (fewer ions per volume); molar conductivity rises.
- Strong electrolytes: $\Lambda_m$ rises gently, linearly with $\sqrt{C}$, and can be extrapolated to $\Lambda^\circ_m$. Weak electrolytes: $\Lambda_m$ rises steeply at low concentration and cannot be extrapolated, so $\Lambda^\circ_m$ comes from Kohlrausch's law.
- Kohlrausch's law: $\Lambda^\circ_m = \nu_+\lambda^\circ_+ + \nu_-\lambda^\circ_-$. For a weak electrolyte, degree of dissociation $\alpha = \frac{\Lambda_m}{\Lambda^\circ_m}$.
Electrolysis products
| Electrolyte | Cathode | Anode |
|---|---|---|
| Molten NaCl | Na | $\mathrm{Cl_2}$ |
| Aqueous NaCl (concentrated) | $\mathrm{H_2}$ | $\mathrm{Cl_2}$ (oxygen evolution has a high overpotential) |
| Aqueous $\mathrm{CuSO_4}$, Pt electrodes | Cu | $\mathrm{O_2}$ |
| Aqueous $\mathrm{CuSO_4}$, Cu electrodes | Cu deposits | Cu dissolves |
Batteries, fuel cells and corrosion
| Device | Anode | Cathode | Electrolyte |
|---|---|---|---|
| Dry cell (about 1.5 V) | Zinc container | Carbon rod with $\mathrm{MnO_2}$ | Moist paste of $\mathrm{NH_4Cl}$ and $\mathrm{ZnCl_2}$ |
| Lead storage battery | Pb | Grid packed with $\mathrm{PbO_2}$ | About 38% $\mathrm{H_2SO_4}$ |
| $\mathrm{H_2}$–$\mathrm{O_2}$ fuel cell | $\mathrm{H_2}$ electrode | $\mathrm{O_2}$ electrode | Concentrated aqueous NaOH or KOH (product: water) |
On discharge of the lead battery, both electrodes turn to $\mathrm{PbSO_4}$ and the acid is used up. Corrosion is the unwanted electrochemical oxidation of a metal by its surroundings; rusting of iron gives hydrated iron(III) oxide.
Chemical thermodynamics
The first law and its signs
$\Delta U = q + w$, with heat absorbed by the system positive and work done on the system positive. Work done by the system is negative.
- Work against constant external pressure: $w = -p_{ex}\Delta V$.
- Reversible isothermal expansion of an ideal gas: $w = -2.303nRT\log\frac{V_2}{V_1}$.
- Free expansion (into a vacuum): $p_{ex} = 0$, so $w = 0$. For an ideal gas at constant temperature, $\Delta U = 0$, so $q = 0$ too.
- $\Delta H = \Delta U + \Delta n_g RT$. For $\mathrm{N_2 + 3H_2 \rightarrow 2NH_3}$, $\Delta n_g = -2$, so $\Delta H$ is about 4.96 kJ more negative than $\Delta U$ at 298 K.
State and path functions, extensive and intensive
U, H, S and G are state functions; q and w are path functions. Mass, volume, U, H and S are extensive; temperature, pressure, density and all molar quantities are intensive.
Hess's law and bond enthalpies
Enthalpy change does not depend on the route. Add and subtract equations exactly as you would add and subtract their $\Delta H$ values. With bond enthalpies: $\Delta_rH = \sum(\text{bonds broken}) - \sum(\text{bonds formed})$, reactants minus products, the opposite way round from formation enthalpies.
Spontaneity
| $\Delta H$ | $\Delta S$ | Spontaneous when |
|---|---|---|
| − | + | Always |
| + | − | Never |
| − | − | Low temperature |
| + | + | High temperature |
The switch-over temperature is $T = \frac{\Delta H}{\Delta S}$, where $\Delta G = 0$. For a phase change at its transition temperature, $\Delta S = \frac{\Delta H}{T}$.
The two calorimetry experiments in Unit 20 of the syllabus (enthalpy of solution of copper sulphate, enthalpy of neutralisation of a strong acid by a strong base) use these ideas. They are covered in our practical chemistry guide.
Seven NEET past questions, solved
1. NEET (UG) 2026 (cancelled May sitting), Q118. A solution of copper sulphate is electrolysed for 10 minutes with a current of 1.5 amperes. The mass of copper deposited at cathode is : (Given : Molar mass of $\mathrm{Cu}=63\ \mathrm{g\,mol^{-1}}$; $1\ \mathrm{F}=96487\ \mathrm{C\,mol^{-1}}$)
(A) 1.7018 g (B) 0.2938 g (C) 2.4036 g (D) 0.5876 g
Official answer: (B). $Q = 1.5 \times 600 = 900$ C. Mass $= \frac{900 \times 63}{2 \times 96487} \approx 0.2938$ g. Option (D) is exactly twice the answer, for students who forget that copper takes two electrons. See the paper.
2. NEET (UG) 2026 Re-exam, Q56. The standard electrode potential ($E^\circ$) for the half-cell reaction $\mathrm{Fe^{3+}+e^-\rightarrow Fe^{2+}}$ at 298 K is (Given: $E^\circ(\mathrm{Fe^{3+}/Fe})=-0.04$ V and $E^\circ(\mathrm{Fe^{2+}/Fe})=-0.44$ V at 298 K)
(A) $+0.40$ V (B) $+0.76$ V (C) $-0.48$ V (D) $+0.92$ V
Official answer: (B). $\mathrm{Fe^{3+} + 3e^- \rightarrow Fe}$: $\Delta G^\circ = -3F(-0.04) = +0.12F$. $\mathrm{Fe^{2+} + 2e^- \rightarrow Fe}$: $\Delta G^\circ = +0.88F$. Subtract: $\Delta G^\circ = -0.76F$ for the one-electron step, so $E^\circ = +0.76$ V. Simply subtracting the potentials gives +0.40 V, option (A). See the paper.
3. NEET (UG) 2025, Q61. If the molar conductivity ($\Lambda_m$) of a 0.050 mol L⁻¹ solution of a monobasic weak acid is 90 S cm² mol⁻¹, its extent (degree) of dissociation will be [Assume $\Lambda^\circ_+ = 349.6$ S cm² mol⁻¹ and $\Lambda^\circ_- = 50.4$ S cm² mol⁻¹.]
(A) 0.115 (B) 0.125 (C) 0.225 (D) 0.215
Official answer: (C). $\Lambda^\circ_m = 349.6 + 50.4 = 400$; $\alpha = \frac{90}{400} = 0.225$. The concentration is a distractor. See the paper.
4. NEET (UG) 2026 (cancelled May sitting), Q119. At a certain temperature, T(K), during a process, 500 J is absorbed by the system and work of 200 J is done by the system. Then change in internal energy of the system is :
(A) 400 J (B) 300 J (C) 700 J (D) 500 J
Official answer: (B). $q = +500$ J, $w = -200$ J, so $\Delta U = 300$ J. Option (C) comes from getting the sign of w wrong.
5. NEET (UG) 2026 Re-exam, Q59. Two moles of an ideal gas undergo free expansion from 10 L to 100 L at 300 K. The values of $\Delta S_{system}$ and $\Delta S_{surroundings}$ are (R is universal gas constant)
(A) $\Delta S_{system}=0;\ \Delta S_{surroundings}=0$ (B) $\Delta S_{system}=4.606\,R;\ \Delta S_{surroundings}=-4.606\,R$ (C) $\Delta S_{system}=0;\ \Delta S_{surroundings}=4.606\,R$ (D) $\Delta S_{system}=4.606\,R;\ \Delta S_{surroundings}=0$
Official answer: (D). Entropy is a state function, so calculate $\Delta S_{system}$ along a reversible isothermal path between the same states: $nR\ln\frac{V_2}{V_1} = 2R \times 2.303 \times 1 = 4.606R$. No heat is exchanged in the actual free expansion, so the surroundings do not change. Option (B) is what you get by treating the actual process as reversible.
6. NEET (UG) 2025, Q85. The standard heat of formation, in kcal/mol of $\mathrm{Ba^{2+}}$ is : [Given : standard heat of formation of $\mathrm{SO_4^{2-}}$ ion (aq) = −216 kcal/mol, standard heat of crystallisation of $\mathrm{BaSO_4(s)}$ = −4.5 kcal/mol, standard heat of formation of $\mathrm{BaSO_4(s)}$ = −349 kcal/mol]
(A) −128.5 (B) −133.0 (C) +133.0 (D) +220.5
Official answer: (A). Crystallisation is $\mathrm{Ba^{2+}(aq) + SO_4^{2-}(aq) \rightarrow BaSO_4(s)}$. By Hess's law, $-349 = x + (-216) + (-4.5)$, so $x = -128.5$ kcal/mol.
7. NEET (UG) 2026 Re-exam, Q74. A protein undergoes reversible thermal denaturation from its initial state N to denatured state D according to $\mathrm{N \rightleftharpoons D}$. At 60 °C, the concentrations of both N and D are equal at equilibrium, and the standard enthalpy change of denaturation is 666 kJ mol⁻¹. The standard entropy change ($\Delta S^\circ$ in kJ K⁻¹ mol⁻¹) of the protein upon denaturation at 60 °C is closest to
(A) 2.0 (B) 2000.0 (C) 333.0 (D) 11.1
Official answer: (A). Equal concentrations give K = 1, so $\Delta G^\circ = 0$ and $\Delta S^\circ = \frac{\Delta H^\circ}{T} = \frac{666}{333} = 2.0$ kJ K⁻¹ mol⁻¹. Option (D) comes from forgetting to convert 60 °C to kelvin.
How to prepare these chapters
- Learn the bridge table first, then practise moving between $E^\circ$, $\Delta G^\circ$ and K in both directions.
- Fix your sign convention once and write "q in +, w on +" at the top of every thermodynamics problem until it is automatic.
- Keep units honest: kJ against J, °C against K, R in J against L atm. Most wrong options in these chapters come from unit errors.
- Solve past questions by chapter. More are in the Electrochemistry PYQ post and the Chemical Thermodynamics PYQ post. Study chapters: Electrochemistry and Chemical Thermodynamics, each also in Hindi and Telugu. Chapter tests (15 questions, 15 minutes) are at /dashboard/exams/neet-ug (login needed).
For the other numerical chapters, see our physical chemistry numericals guide; for the overall plan, the NEET Chemistry preparation strategy.
Frequently asked questions
How many questions come from electrochemistry in NEET?
In the 10 NEET papers from 2021 to 2026 on Pareeksha, Electrochemistry had 16 tagged questions, about 1.6 per paper, and Chemical Thermodynamics had 15. Together they average about three questions per paper.
Why can't I add electrode potentials directly?
Electrode potential does not depend on how much substance reacts; it is an intensive property. Gibbs energy does depend on it, through $\Delta G^\circ = -nFE^\circ$. To combine half-reactions with different numbers of electrons, add their $\Delta G^\circ$ values and divide by the new n times F.
What is the sign convention for work in NEET?
NEET follows the convention in which work done on the system is positive and work done by the system is negative, so $\Delta U = q + w$. With this convention, expansion work is negative.
Why is molar conductivity higher on dilution while conductivity falls?
Conductivity measures the conducting power of one cubic centimetre of solution, and dilution leaves fewer ions in that volume. Molar conductivity measures the conducting power of all the ions from one mole of electrolyte; on dilution those ions move more freely, and for weak electrolytes more molecules dissociate, so it rises.
Is entropy change zero in a free expansion?
Not for the system. Entropy is a state function, so the system's entropy rises by $nR\ln\frac{V_2}{V_1}$ even though no heat flows. The surroundings exchange no heat, so their entropy does not change, and the total entropy increases, as it must for a spontaneous process.

Comments (0)
No comments yet. Be the first to share your thoughts.