LATEST
NEETBy Pareeksha Editorial Team· ⏱ 9 min read

Graph Questions in NEET Physics: Slopes, Areas, Shapes

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Graph Questions in NEET Physics: Slopes, Areas, Shapes
On this page
  1. The four-step method for any graph
  2. Motion graphs
  3. Force, work and energy graphs
  4. Stress–strain curve
  5. Thermodynamics and heat
  6. Oscillation and wave graphs
  7. Electric and magnetic field graphs
  8. Circuit graphs
  9. Modern physics graphs
  10. Common graph traps
  11. How to practise graphs
  12. Frequently asked questions
  13. How many graph questions come in NEET Physics?
  14. Which graphs are asked most in NEET Physics?
  15. What is the quickest way to answer a "which graph" question?
  16. Do graph questions take more time?
  17. Should I memorise the binding energy curve values?

Graphs turn up across NEET Physics: in kinematics, thermodynamics, oscillations, electricity and modern physics. Some questions show a graph and ask what it means; others describe a situation and ask which graph fits. Either way, the question is testing whether you know a relationship well enough to picture it.

The share of questions that carry a figure has grown. On Pareeksha's digitised copies, the NEET 2024 paper has 32 questions with a figure, the 2026 re-exam 29 and the 2025 paper 21, across all subjects (these counts come from an automatic scan and are approximate, and some older papers were digitised without their figures). These counts are not split by subject, but in Physics the figures are mostly graphs, circuits and ray diagrams, and even questions without a figure often ask you to picture a graph.

This guide lists every graph type the syllabus produces, what its slope, area and shape tell you, and the trap attached to each.

The four-step method for any graph

  1. Read both axes and their units. Is it $V$ against $I$ or $I$ against $V$? Is it $T$ or $T^2$? Many errors happen before any physics is done.
  2. Write the equation that links the two quantities. Rearrange it into the form $y = mx + c$ if you can.
  3. Ask what the slope and the area mean. The slope is $\frac{dy}{dx}$; the area is $\int y\,dx$. Either can be a physical quantity, or neither.
  4. Check special points. Intercepts, maxima, points where the curve crosses the axis, and where it changes shape.

Motion graphs

Graph Slope Area under curve
position–time velocity (not used)
velocity–time acceleration displacement
acceleration–time (rarely used) change in velocity
  • Constant velocity: $x$–$t$ is a straight line; $v$–$t$ is horizontal.
  • Constant acceleration: $x$–$t$ is a parabola; $v$–$t$ is a straight line.
  • Area below the time axis on a $v$–$t$ graph is negative displacement; for distance, add the magnitudes.
  • An $x$–$t$ graph can never show two positions at the same time, so a curve that bends back is impossible.

Worked example. A car speeds up uniformly from rest to 20 m/s in 4 s, moves at 20 m/s for 6 s, then slows uniformly to rest in 5 s. The $v$–$t$ graph is a trapezium. Distance $= \frac{1}{2}(4)(20) + (6)(20) + \frac{1}{2}(5)(20) = 40 + 120 + 50 = 210$ m, and average speed $= \frac{210}{15} = 14$ m/s.

Past question (NEET (UG) 2026, cancelled May sitting, Q161). When a ruler falls vertically, 5 different persons catch it with different reaction times. ( $g=9.8\ \mathrm{m}{\ \mathrm{s}}^{-2}$ ) A. Person A has reaction time of 0.20 s . B. Person $B$ has reaction time of 0.22 s . C. Person C has reaction time of 0.18 s . D. Person D has reaction time of 0.19 s . E. Person E has reaction time of 0.21 s . What is the correct order of the distance travelled by the ruler for each person?

(A) B E A C D (B) C D A B E (C) B E A D C (D) C D A E B

Official answer: (C). The ruler falls from rest, so $s = \frac{1}{2}gt^2$, a rising parabola: a longer reaction time always means a longer fall. Ordering the times from longest to shortest, 0.22 (B), 0.21 (E), 0.20 (A), 0.19 (D), 0.18 (C), gives B E A D C. No arithmetic is needed once you picture the curve.

Force, work and energy graphs

  • Force–displacement: area is work done. For a spring, $F = kx$ is a straight line and the triangle's area is $\frac{1}{2}kx^2$.
  • Force–time: area is impulse, equal to the change in momentum.
  • Potential energy–position: $F = -\frac{dU}{dx}$. Where the curve is flat, the force is zero (equilibrium). A minimum is stable equilibrium; a maximum is unstable.

Stress–strain curve

The straight early part obeys Hooke's law; its slope is Young's modulus. After the elastic limit the material yields, reaches its ultimate strength, and finally breaks at the fracture point. A brittle material breaks soon after its ultimate strength; a ductile one stretches a long way between the two.

Past question (NEET (UG) 2019 Odisha, Q176). The stress-strain curves are drawn for two different materials X and Y. It is observed that the ultimate strength point and the fracture point are close to each other for material X but are far apart for material Y. We can say that materials X and Y are likely to be (respectively),

(A) Plastic and ductile (B) Ductile and brittle (C) Brittle and ductile (D) Brittle and plastic

Official answer: (C). Close together means little plastic flow before breaking (brittle); far apart means a long plastic region (ductile).

Thermodynamics and heat

Process Shape on a $P$–$V$ graph
Isobaric (constant $P$) horizontal line
Isochoric (constant $V$) vertical line, no work
Isothermal hyperbola, $PV$ constant
Adiabatic steeper curve than the isothermal through the same point ($PV^\gamma$ constant)
  • Work done by the gas is the area under the curve on a $P$–$V$ graph.
  • In a cycle, net work is the enclosed area; clockwise on $P$–$V$ means the gas does net positive work.
  • Cooling curves (temperature against time) fall steeply at first and level off towards room temperature, since the rate of cooling is roughly proportional to the temperature difference.

Worked example. A gas expands at a constant $2 \times 10^5$ Pa from 1 L to 3 L. Work $= P\Delta V = 2 \times 10^5 \times 2 \times 10^{-3} = 400$ J, the area of the rectangle. Remember 1 L $= 10^{-3}$ m³.

Oscillation and wave graphs

  • Displacement in SHM is a sine curve in time. Velocity leads displacement by a quarter cycle; acceleration is opposite to displacement.
  • Kinetic and potential energy against displacement are parabolas: $U = \frac{1}{2}kx^2$ opens upward, $K = \frac{1}{2}k(A^2 - x^2)$ opens downward, and their sum is a flat line.
  • Against time, kinetic and potential energy oscillate at twice the frequency of the motion.
  • For a pendulum, $T^2$ against $l$ is a straight line through the origin with slope $\frac{4\pi^2}{g}$. Plotting $T$ against $l$ would give a curve.
  • In the syllabus experiment on a simple pendulum, energy loss is studied by plotting the square of the amplitude against time.

Electric and magnetic field graphs

Source Inside Outside
Charged spherical shell, field $E$ zero falls as $\frac{1}{r^2}$
Charged spherical shell, potential $V$ constant (equal to surface value) falls as $\frac{1}{r}$
Uniformly charged solid sphere, $E$ rises linearly with $r$ falls as $\frac{1}{r^2}$
Long solid wire with uniform current, $B$ rises linearly with $r$ falls as $\frac{1}{r}$
Earth (uniform density), $g$ rises linearly with distance from the centre falls as $\frac{1}{r^2}$

All the "rises linearly, then falls" graphs peak at the surface.

Circuit graphs

  • Ohmic conductor: $V$–$I$ is a straight line through the origin with slope $R$. On an $I$–$V$ graph the slope is $\frac{1}{R}$.
  • Resistivity against temperature: rises for metals, falls for semiconductors.
  • Diode $I$–$V$: almost no current in forward bias until the knee voltage, then a steep rise; a tiny reverse current until breakdown, where a Zener diode's current rises sharply at a nearly fixed voltage.
  • Series LCR, current against frequency: a peak at resonance, $f_0 = \frac{1}{2\pi\sqrt{LC}}$; the smaller the resistance, the taller and sharper the peak.
  • Reactance against frequency: $X_L = 2\pi fL$ is a straight line through the origin; $X_C = \frac{1}{2\pi fC}$ falls as a hyperbola.

Modern physics graphs

  • Photocurrent against anode voltage: brighter light raises the saturation current but not the stopping potential; higher frequency raises the stopping potential.
  • Stopping potential against frequency: a straight line of slope $\frac{h}{e}$, the same for every metal; the intercept on the frequency axis is the threshold frequency. Lines for different metals are parallel.
  • Binding energy per nucleon against mass number: rises steeply for light nuclei, peaks near $A = 56$, then falls slowly. Fusion moves light nuclei up the rising side; fission splits heavy nuclei towards the peak.
  • Number of nuclei against time: exponential decay; on a graph of $\ln N$ against $t$ it becomes a straight line with slope $-\lambda$.

Worked example. For a metal, the stopping potential is 1.0 V at $7.50 \times 10^{14}$ Hz and 2.0 V at $9.92 \times 10^{14}$ Hz. The slope is $\frac{1.0}{2.42 \times 10^{14}} \approx 4.13 \times 10^{-15}$ V s, so $h = e \times \text{slope} \approx 1.6 \times 10^{-19} \times 4.13 \times 10^{-15} \approx 6.6 \times 10^{-34}$ J s.

Common graph traps

  1. Swapped axes. The steeper line on an $I$–$V$ graph has the lower resistance.
  2. Distance from a $v$–$t$ graph when the line crosses the time axis: add areas as positive.
  3. Squared variables. $T^2$ against $l$ is straight; $T$ against $l$ is not.
  4. Isothermal versus adiabatic: through the same point, the adiabatic curve is steeper.
  5. Intensity versus frequency in photoelectric graphs: they change different things.
  6. Logarithmic axes: a straight line on a $\ln N$ graph is an exponential on a plain one.

How to practise graphs

Draw them. For each chapter, sketch the three or four graphs listed above from memory, then check. Do this once a week until you can draw every one without looking. Then solve the figure questions in recent papers: the NEET 2024 paper and the 2026 re-exam have the most on Pareeksha. All 51 papers are on the past-paper page.

The formula sheets in this series list the equations behind each graph: mechanics, modern physics and semiconductors and magnetism, EMI and AC. Slopes and areas are explained more generally in maths for NEET Physics. The heat and thermodynamics chapters, where $P$–$V$ graphs live, are in the Heat, Thermodynamics and Kinetic Theory book, and kinematics graphs are in the Motion in a Straight Line chapter. For which chapters these graphs come from most often, see the Physics weightage table and the syllabus units.

Frequently asked questions

How many graph questions come in NEET Physics?

There is no fixed number. On Pareeksha's digitised copies, recent papers have 20 to 30 figure-based questions across all subjects; we do not have a reliable split by subject. In Physics the figures include circuit and ray diagrams as well as graphs. Treat graph reading as a skill used throughout the paper, not a separate topic.

Which graphs are asked most in NEET Physics?

We have not counted graphs by type, so take this as guidance rather than data: the graphs most worth knowing come from high-weight or often-tested topics, namely motion ($x$–$t$ and $v$–$t$), the photoelectric effect, $P$–$V$ processes, diode characteristics, LCR resonance and the fields of spheres and wires. All of them are covered above.

What is the quickest way to answer a "which graph" question?

Write the equation linking the two quantities and identify its type: straight line, parabola, hyperbola or exponential. Then check one special point, such as the origin or a maximum. That usually leaves one option.

Do graph questions take more time?

They take less if you know the relationship, often under 30 seconds, because there is little arithmetic. They take much more if you do not, which is why practising graph sketches pays off.

Should I memorise the binding energy curve values?

Know the shape, the peak near $A = 56$ at about 8.8 MeV per nucleon, and which side fission and fusion work on. Exact values for other nuclei are given in questions when needed.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.