LATEST
NEETBy Pareeksha Editorial Team· ⏱ 10 min read

NEET Physics Formulas for Mechanics: Full Formula Sheet

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
NEET Physics Formulas for Mechanics: Full Formula Sheet
On this page
  1. How much mechanics is asked
  2. Kinematics
  3. Laws of motion and friction
  4. Work, energy and power
  5. Centre of mass and rotation
  6. Gravitation
  7. Solids: elasticity
  8. Fluids
  9. How to use this sheet
  10. Frequently asked questions
  11. Which mechanics chapters matter most for NEET?
  12. Do I need calculus for NEET mechanics?
  13. Is it enough to memorise this formula sheet?
  14. Are heat, oscillations and waves part of mechanics?

Mechanics is the largest block of NEET Physics, and also the most spread out. In the 10 NEET papers from 2021 to 2026 on Pareeksha (including the additional sittings and re-exams), 98 of the 347 tagged Physics questions came from the nine mechanics chapters, about 28%. No single chapter dominates, so the way to collect these marks is to hold every formula firmly and know when each applies.

This sheet covers the mechanics formulas from kinematics to fluids, without the heat topics; units and errors have their own guide, units and dimensions for NEET. Most sections end with the trap that turns a right formula into a wrong answer.

How much mechanics is asked

Chapter Questions, NEET 2021–2026 Book chapter
Units and Measurements 16 Read
System of Particles and Rotational Motion 16 Read
Laws of Motion 13 Read
Mechanical Properties of Fluids 13 Read
Gravitation 12 Read
Work, Energy and Power 10 Read
Motion in a Straight Line 9 Read
Motion in a Plane 5 Read
Mechanical Properties of Solids 4 Read

Counts are from Pareeksha's digitised papers; a few papers are a few questions short, so read these as shares. The full table for every subject is on the chapter-wise weightage page.

Kinematics

Straight line, constant acceleration

  • $v = u + at$
  • $s = ut + \frac{1}{2}at^2$
  • $v^2 = u^2 + 2as$
  • Distance in the $n$th second: $s_n = u + \frac{a}{2}(2n - 1)$
  • Free fall from rest: distances in successive seconds are in the ratio $1:3:5:7$
  • Average speed over two equal distances at $v_1$ and $v_2$: $\frac{2v_1v_2}{v_1 + v_2}$ (not the simple average)

Calculus forms (needed when position is given as a function of time): $v = \frac{dx}{dt}$, $a = \frac{dv}{dt} = v\frac{dv}{dx}$. The maths for NEET Physics guide works through these.

Projectile launched from the ground at speed $u$, angle $\theta$

Quantity Formula
Time of flight $T = \frac{2u\sin\theta}{g}$
Maximum height $H = \frac{u^2\sin^2\theta}{2g}$
Horizontal range $R = \frac{u^2\sin 2\theta}{g}$, largest at $45^\circ$
Range equal for $\theta$ and $90^\circ - \theta$

Circular motion: $v = \omega r$, centripetal acceleration $a_c = \frac{v^2}{r} = \omega^2 r$. Uniform circular motion has constant speed but changing velocity and changing acceleration, since both keep turning.

Relative velocity: $\vec v_{AB} = \vec v_A - \vec v_B$.

Trap: using $H = \frac{u^2}{2g}$ for a projectile. Only the vertical component $u\sin\theta$ decides the height. A ball thrown at 20 m/s at $30^\circ$ with $g = 10$ m/s² rises to $\frac{(20 \times 0.5)^2}{2 \times 10} = 5$ m, which was the answer to a NEET 2022 (Phase 2) question.

Laws of motion and friction

  • $\vec F = \frac{d\vec p}{dt}$; for constant mass $F = ma$
  • Impulse $= F\Delta t = \Delta p$
  • Static friction $f_s \le \mu_s N$; kinetic friction $f_k = \mu_k N$
  • Block sliding down a rough incline: $a = g(\sin\theta - \mu_k\cos\theta)$
  • Angle of repose: $\tan\theta = \mu_s$
  • Apparent weight in a lift accelerating upward: $m(g + a)$; downward: $m(g - a)$
  • Largest acceleration before a box slips on a moving floor: $a_{max} = \mu_s g$
  • Car on a level curve: $v_{max} = \sqrt{\mu_s r g}$
  • Banked road, no friction needed: $\tan\theta = \frac{v^2}{rg}$
  • Banked road with friction: $v_{max} = \sqrt{rg\,\frac{\mu_s + \tan\theta}{1 - \mu_s\tan\theta}}$
  • Tension for a mass whirled in a horizontal circle: $T = m\omega^2 r$, so doubling $\omega$ makes $T$ four times larger

Past question (NEET (UG) 2026 Re-exam, Q41). A car travels on a circular racetrack of radius 50 m, which is banked at an angle $\theta$. If the car travels at a speed $10\ \mathrm{ms^{-1}}$, then the wear and tear on its tyres is minimum. Taking the acceleration due to gravity to be $10\ \mathrm{ms^{-2}}$, the value of $\theta$ is :

(A) $\tan^{-1}\left(\frac{1}{5}\right)$ (B) $\tan^{-1}\left(\frac{2}{5}\right)$ (C) $\tan^{-1}\left(\sqrt{3}/2\right)$ (D) $\tan^{-1}\left(2\sqrt{3}\right)$

Official answer: (A). Minimum tyre wear means friction is not needed at that speed, so the no-friction banking formula applies: $\tan\theta = \frac{v^2}{rg} = \frac{100}{50 \times 10} = \frac{1}{5}$.

Work, energy and power

  • Work by a constant force: $W = \vec F \cdot \vec s = Fs\cos\theta$
  • Work by a variable force: $W = \int F\,dx$ (area under the force–displacement graph)
  • Kinetic energy $K = \frac{1}{2}mv^2 = \frac{p^2}{2m}$
  • Spring potential energy $U = \frac{1}{2}kx^2$, so stretching twice as far stores four times the energy
  • Work-energy theorem: $W_{net} = \Delta K$
  • Power $P = \frac{W}{t} = \vec F \cdot \vec v$
  • Vertical circle on a string: least speed at the top $\sqrt{gr}$, least speed at the bottom to complete the loop $\sqrt{5gr}$

Collisions in one dimension

Case Result
Momentum (all collisions) $m_1u_1 + m_2u_2 = m_1v_1 + m_2v_2$
Coefficient of restitution $e = \frac{v_2 - v_1}{u_1 - u_2}$; $e = 1$ elastic, $e = 0$ perfectly inelastic
Perfectly inelastic common velocity $v = \frac{m_1u_1 + m_2u_2}{m_1 + m_2}$
Elastic, $m_2$ at rest $v_1 = \frac{(m_1 - m_2)u_1}{m_1 + m_2}$, $v_2 = \frac{2m_1u_1}{m_1 + m_2}$
Elastic, equal masses velocities are exchanged

Trap: assuming kinetic energy is conserved in every collision. Only momentum is always conserved. When two equal masses stick together and one was at rest, the speed halves, so $v_1 : v_2 = 2 : 1$, as NEET 2024 asked.

Centre of mass and rotation

  • Centre of mass of two particles: $x_{cm} = \frac{m_1x_1 + m_2x_2}{m_1 + m_2}$. With no external force, the centre of mass velocity does not change.
  • Torque $\vec\tau = \vec r \times \vec F$; angular momentum $L = I\omega$; $\tau = I\alpha = \frac{dL}{dt}$
  • Rotational kinetic energy $\frac{1}{2}I\omega^2$
  • Constant angular acceleration: $\omega = \omega_0 + \alpha t$, $\theta = \omega_0 t + \frac{1}{2}\alpha t^2$, $\omega^2 = \omega_0^2 + 2\alpha\theta$
  • Conservation of angular momentum: $I_1\omega_1 = I_2\omega_2$
  • Parallel axis: $I = I_{cm} + Md^2$; perpendicular axis (flat bodies): $I_z = I_x + I_y$
  • Radius of gyration: $I = Mk^2$

Moments of inertia to know cold

Body Axis $I$
Ring through centre, perpendicular to plane $MR^2$
Disc or solid cylinder through centre, along the axis $\frac{1}{2}MR^2$
Solid sphere diameter $\frac{2}{5}MR^2$
Hollow sphere diameter $\frac{2}{3}MR^2$
Thin rod through centre, perpendicular $\frac{ML^2}{12}$
Thin rod through one end, perpendicular $\frac{ML^2}{3}$

Rolling without slipping: $K = \frac{1}{2}mv^2\left(1 + \frac{k^2}{R^2}\right)$, and down an incline $a = \frac{g\sin\theta}{1 + k^2/R^2}$. The body with the smallest $\frac{k^2}{R^2}$ (solid sphere, 0.4) reaches the bottom first; the ring (1) is last.

Past question (NEET (UG) 2025, Q17). The Sun rotates around its centre once in 27 days. What will be the period of revolution if the Sun were to expand to twice its present radius without any external influence? Assume the Sun to be a sphere of uniform density.

(A) 100 days (B) 105 days (C) 115 days (D) 108 days

Official answer: (D). No external torque, so $I\omega$ is constant. For a uniform sphere $I = \frac{2}{5}MR^2$, so doubling $R$ makes $I$ four times larger and $\omega$ four times smaller. The period becomes $4 \times 27 = 108$ days.

Past question (NEET (UG) 2026, cancelled May sitting, Q139). The angular speed of a flywheel is increased from 600 rpm to 1200 rpm in 10 s . The number of revolutions completed by the flywheel during this time is:

(A) 900 (B) 600 (C) 150 (D) 300

Official answer: (C). Work in revolutions per second: 600 rpm is 10 rev/s and 1200 rpm is 20 rev/s. With uniform acceleration the average is 15 rev/s, so in 10 s the wheel turns $15 \times 10 = 150$ revolutions. The trap is mixing minutes and seconds.

Gravitation

  • $F = \frac{Gm_1m_2}{r^2}$, $G = 6.67 \times 10^{-11}\ \mathrm{N\,m^2\,kg^{-2}}$
  • At the surface: $g = \frac{GM}{R^2}$
  • At height $h$: $g_h = g\frac{R^2}{(R + h)^2} \approx g\left(1 - \frac{2h}{R}\right)$ for $h \ll R$
  • At depth $d$: $g_d = g\left(1 - \frac{d}{R}\right)$
  • Potential energy $U = -\frac{GMm}{r}$; potential $V = -\frac{GM}{r}$; field strength $= \frac{F}{m}$
  • Escape speed $v_e = \sqrt{\frac{2GM}{R}} = \sqrt{2gR}$, about 11.2 km/s for the Earth
  • Orbital speed $v_o = \sqrt{\frac{GM}{r}}$; close to the surface $v_e = \sqrt{2}\,v_o$
  • Satellite energies: $K = \frac{GMm}{2r}$, $U = -\frac{GMm}{r}$, total $E = -\frac{GMm}{2r}$
  • Kepler's third law: $T^2 \propto r^3$

Past question (NEET (UG) 2025, Q31). The radius of Martian orbit around the Sun is about 4 times the radius of the orbit of Mercury. The Martian year is 687 Earth days. Then which of the following is the length of 1 year on Mercury ?

(A) 88 earth days (B) 225 earth days (C) 172 earth days (D) 124 earth days

Official answer: (A). From $T \propto r^{3/2}$, the Martian year is $4^{3/2} = 8$ times Mercury's, so Mercury's year is about $\frac{687}{8} \approx 86$ days. The question says "about 4 times", so the closest option, 88 days, is correct.

Trap: $g$ inside the Earth falls linearly with depth, but above the surface it falls with the square of distance from the centre. Keep the two formulas apart.

Solids: elasticity

  • Stress $= \frac{F}{A}$; longitudinal strain $= \frac{\Delta L}{L}$
  • Young's modulus $Y = \frac{FL}{A\,\Delta L}$
  • Bulk modulus $B = -\frac{\Delta P}{\Delta V/V}$; compressibility $= \frac{1}{B}$
  • Shear modulus (modulus of rigidity) $= \frac{\text{shear stress}}{\text{shear strain}}$
  • Poisson's ratio $= \frac{\text{lateral strain}}{\text{longitudinal strain}}$
  • Elastic energy per unit volume $= \frac{1}{2} \times \text{stress} \times \text{strain}$

The largest stretch a wire can take without permanent change is $\Delta L = \frac{\text{elastic limit} \times L}{Y}$. For a 1 m steel wire with elastic limit $8 \times 10^8$ Pa and $Y = 2 \times 10^{11}$ Pa, that is $4 \times 10^{-3}$ m, or 4 mm, as NEET 2024 asked.

Fluids

  • Pressure at depth: $P = P_0 + \rho g h$ (absolute); $\rho g h$ alone is gauge pressure
  • Buoyant force $= \rho_{liquid} V_{immersed}\, g$
  • Continuity: $A_1v_1 = A_2v_2$
  • Bernoulli: $P + \frac{1}{2}\rho v^2 + \rho g h = \text{constant}$ along a streamline; the venturimeter is based on it
  • Speed of efflux: $v = \sqrt{2gh}$
  • Stokes' law: $F = 6\pi\eta r v$
  • Terminal velocity: $v_t = \frac{2r^2(\rho - \sigma)g}{9\eta}$, where $\sigma$ is the density of the liquid
  • Reynolds number $R_e = \frac{\rho v D}{\eta}$; flow turns turbulent above a critical value
  • Excess pressure: drop $\frac{2S}{R}$, soap bubble (two surfaces) $\frac{4S}{R}$
  • Capillary rise: $h = \frac{2S\cos\theta}{r\rho g}$

Trap: confusing absolute and gauge pressure. A submarine rated for 100 atm absolute can go only to a depth where $\rho g h = 99$ atm, because the atmosphere already contributes 1 atm. With $\rho = 1000$ kg/m³, $g = 10$ m/s² and 1 atm $= 10^5$ Pa, that is 990 m, the answer to a 2026 question, not 1000 m.

How to use this sheet

  1. Copy it by hand once, on two sides of paper. Writing fixes a formula far better than reading it.
  2. Attach one solved question to each formula. Every NEET paper, with chapter tags, is on the past-paper page.
  3. Drill by chapter with 15-question, 15-minute tests on the NEET dashboard (login needed).
  4. Revise weekly. Mechanics is Class 11 work and fades during Class 12.

The reasoning behind each formula is in the Laws of Motion, Work-Energy and Rotation and Gravitation and Properties of Matter books (English, Hindi and Telugu). Chapter-level past questions are in the Rotational Motion PYQ post and the Laws of Motion PYQ post; the subject plan is in the NEET Physics preparation strategy, and the unit list is on the NEET syllabus page.

Frequently asked questions

Which mechanics chapters matter most for NEET?

In the 2021–2026 NEET papers on Pareeksha, Units and Measurements and Rotational Motion had 16 questions each, followed by Laws of Motion and Fluids with 13 each and Gravitation with 12. Together the nine mechanics chapters gave 98 of 347 tagged Physics questions.

Do I need calculus for NEET mechanics?

Only simple calculus. You should be able to differentiate a position-time expression to get velocity and acceleration, and integrate a simple force to get work. The questions use polynomials and occasionally sine and cosine, never hard integrals.

Is it enough to memorise this formula sheet?

No. Formulas tell you what to compute, but most mistakes come from choosing the wrong one: gauge versus absolute pressure, the wrong axis for moment of inertia, or conserving energy in an inelastic collision. Solve at least 30 questions per chapter with the sheet beside you.

Are heat, oscillations and waves part of mechanics?

They are separate units in the NEET syllabus (Thermodynamics, Kinetic Theory, and Oscillations and Waves), so they are not on this sheet. They use the same habits, though: units in SI, ratios instead of full calculation, and careful reading of what is asked.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.