LATEST
NEETBy Pareeksha Editorial Team· ⏱ 8 min read

Units and Dimensions NEET: Errors and Significant Figures

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Units and Dimensions NEET: Errors and Significant Figures
On this page
  1. SI base units
  2. The dimension table
  3. Uses of dimensional analysis
  4. Errors in measurement
  5. The three combination rules
  6. Significant figures
  7. A study plan for this chapter
  8. Frequently asked questions
  9. How many questions come from units and dimensions in NEET?
  10. Which quantities have no dimensions?
  11. Do percentage errors ever subtract?
  12. How should I round in NEET answers?
  13. Can dimensional analysis prove a formula is correct?

Units and Measurements is the first chapter of NEET Physics and one of the most dependable sources of marks. In the 10 NEET papers from 2021 to 2026 on Pareeksha it gave 16 Physics questions, up from 5 in the 8 papers from 2016 to 2020, which makes it the joint highest-scoring mechanics chapter in recent years. Across 2016–2026 it ranks 9th of 29 Physics chapters, with 21 of 531 tagged questions.

The questions fall into four types, and each has a fixed method:

Question type What you need
Find the dimensions of a quantity or a combination the dimension table below
Check or derive a formula the principle of homogeneity
Percentage error in a calculated quantity the three error rules
Round a result correctly significant-figure rules

Measuring instruments (vernier callipers, screw gauge) belong with this chapter in practice, and they are covered in the experimental skills guide.

SI base units

Quantity SI unit Symbol Dimension
Mass kilogram kg M
Length metre m L
Time second s T
Electric current ampere A A
Temperature kelvin K K
Amount of substance mole mol mol
Luminous intensity candela cd cd

Angle (radian) and solid angle (steradian) are dimensionless. So is strain, so a question asking which quantities have the same dimensions as solid angle (NEET 2024) has "strain and angle" as its answer.

The dimension table

Learn these by deriving them from a formula you already know, not by rote. If you forget one in the exam, the formula gets it back in ten seconds.

Quantity Formula used Dimensions
Velocity $\frac{x}{t}$ $[\mathrm{LT^{-1}}]$
Acceleration $\frac{v}{t}$ $[\mathrm{LT^{-2}}]$
Force $ma$ $[\mathrm{MLT^{-2}}]$
Momentum, impulse $mv$ $[\mathrm{MLT^{-1}}]$
Work, energy, torque $Fs$ $[\mathrm{ML^2T^{-2}}]$
Power $\frac{W}{t}$ $[\mathrm{ML^2T^{-3}}]$
Pressure, stress, modulus $\frac{F}{A}$ $[\mathrm{ML^{-1}T^{-2}}]$
Angular momentum, Planck's constant $mvr$, $\frac{E}{\nu}$ $[\mathrm{ML^2T^{-1}}]$
Gravitational constant $G$ $\frac{Fr^2}{m_1m_2}$ $[\mathrm{M^{-1}L^3T^{-2}}]$
Surface tension, spring constant $\frac{F}{l}$ $[\mathrm{MT^{-2}}]$
Coefficient of viscosity $\frac{F}{6\pi rv}$ $[\mathrm{ML^{-1}T^{-1}}]$
Moment of inertia $mr^2$ $[\mathrm{ML^2}]$
Specific heat capacity $\frac{Q}{m\Delta T}$ $[\mathrm{L^2T^{-2}K^{-1}}]$
Latent heat $\frac{Q}{m}$ $[\mathrm{L^2T^{-2}}]$
Thermal conductivity $\frac{QL}{tA\Delta T}$ $[\mathrm{MLT^{-3}K^{-1}}]$
Boltzmann constant, gas constant per mole $\frac{E}{T}$ $[\mathrm{ML^2T^{-2}K^{-1}}]$ (R also per mol)
Stefan–Boltzmann constant $\frac{P}{AT^4}$ $[\mathrm{MT^{-3}K^{-4}}]$
Wien's constant $\lambda_m T$ $[\mathrm{LK}]$
Charge $It$ $[\mathrm{AT}]$
Potential, emf $\frac{W}{q}$ $[\mathrm{ML^2T^{-3}A^{-1}}]$
Electric field $\frac{F}{q}$ $[\mathrm{MLT^{-3}A^{-1}}]$
Resistance $\frac{V}{I}$ $[\mathrm{ML^2T^{-3}A^{-2}}]$
Capacitance $\frac{Q}{V}$ $[\mathrm{M^{-1}L^{-2}T^4A^2}]$
Permittivity $\varepsilon_0$ $\frac{q^2}{4\pi Fr^2}$ $[\mathrm{M^{-1}L^{-3}T^4A^2}]$
Magnetic field $\frac{F}{qv}$ $[\mathrm{MT^{-2}A^{-1}}]$
Magnetic flux $BA$ $[\mathrm{ML^2T^{-2}A^{-1}}]$
Inductance $\frac{2U}{I^2}$ $[\mathrm{ML^2T^{-2}A^{-2}}]$
Permeability $\mu_0$ $\frac{2\pi dF}{lI^2}$ $[\mathrm{MLT^{-2}A^{-2}}]$

Three pairs NEET likes to test because they share dimensions: work and torque; angular momentum and Planck's constant; pressure and energy density. Also, $\frac{1}{\sqrt{\mu_0\varepsilon_0}}$ has the dimensions of speed, and $\frac{L}{R}$ and $RC$ have the dimensions of time.

Past question (NEET (UG) 2023 Manipur, Q132). The mechanical quantity, which has dimensions of reciprocal of mass $({\mathrm{M}}^{-1})$ is :

(A) angular momentum (B) coefficient of thermal conductivity (C) torque (D) gravitational constant

Official answer: (D). From the table, only $G$ has $\mathrm{M^{-1}}$.

Past question (NEET (UG) 2026 Re-exam, Q37). Consider that $\sigma_s$, $k_B$, b represent Stefan-Boltzmann constant, Boltzmann constant and Wien's displacement law constant, respectively. The dimension of $\sigma_s k_B^{-1} b$ is :

(A) $[\mathrm{L^{-1}T^{-1}K^{-2}}]$ (B) $[\mathrm{L^{-1}K^{-2}}]$ (C) $[\mathrm{L^{-1}T^{-1}K^{-3}}]$ (D) $[\mathrm{L^{-1}T^{-1}K^{-4}}]$

Official answer: (A). Multiply term by term:

  • $\sigma_s$: $\mathrm{M\,T^{-3}K^{-4}}$
  • $k_B^{-1}$: $\mathrm{M^{-1}L^{-2}T^{2}K}$
  • $b$: $\mathrm{L\,K}$

M cancels; L: $-2 + 1 = -1$; T: $-3 + 2 = -1$; K: $-4 + 1 + 1 = -2$. Result $[\mathrm{L^{-1}T^{-1}K^{-2}}]$. Writing each factor on its own line, as here, avoids most slips.

Uses of dimensional analysis

1. Checking a formula. Every term added or equated must have the same dimensions (the principle of homogeneity). $s = ut + \frac{1}{2}at^2$ passes: each term is L.

2. Deriving a relation. Suppose the period of a pendulum depends on length $l$, mass $m$ and $g$: $T = k\,l^a m^b g^c$. Then

$[\mathrm{T}] = [\mathrm{L}]^a[\mathrm{M}]^b[\mathrm{LT^{-2}}]^c$

Matching powers: M gives $b = 0$; T gives $-2c = 1$, so $c = -\frac{1}{2}$; L gives $a + c = 0$, so $a = \frac{1}{2}$. Hence $T = k\sqrt{\frac{l}{g}}$, and the mass does not matter. Dimensions cannot give $k$ (it is $2\pi$).

3. Converting units. For a quantity with dimensions $[\mathrm{M^aL^bT^c}]$, $n_2 = n_1\left(\frac{M_1}{M_2}\right)^a\left(\frac{L_1}{L_2}\right)^b\left(\frac{T_1}{T_2}\right)^c$. For 1 joule in ergs: $1 \times \left(\frac{1\ \text{kg}}{1\ \text{g}}\right)^1\left(\frac{1\ \text{m}}{1\ \text{cm}}\right)^2 = 10^3 \times 10^4 = 10^7$ erg.

Limits. Dimensional analysis cannot find pure-number constants, cannot handle formulas with sums of different terms or with sine, log and exponential functions, and cannot separate two quantities with the same dimensions (work and torque).

Errors in measurement

  • Absolute error of a reading: $\Delta a_i = \lvert a_i - \bar a \rvert$
  • Mean absolute error: the average of the absolute errors
  • Relative error: $\frac{\Delta a}{a}$; percentage error: $\frac{\Delta a}{a} \times 100$
  • Systematic errors (instrument zero error, method) push readings one way and are corrected; random errors scatter readings and are reduced by repeating measurements
  • Least count is the smallest reading an instrument can make; a single reading has an uncertainty of about one least count

Worked example. A pendulum is timed for 20 oscillations five times, and each total is divided by 20. The periods are 1.92, 1.98, 2.04, 1.96 and 2.10 s. The mean is $\frac{10.00}{5} = 2.00$ s. The absolute errors are 0.08, 0.02, 0.04, 0.04 and 0.10 s, with mean $\frac{0.28}{5} = 0.056 \approx 0.06$ s. So $T = (2.00 \pm 0.06)$ s, a 3% error.

The three combination rules

Result Error rule
$Z = A + B$ or $A - B$ absolute errors add: $\Delta Z = \Delta A + \Delta B$
$Z = AB$ or $\frac{A}{B}$ relative errors add: $\frac{\Delta Z}{Z} = \frac{\Delta A}{A} + \frac{\Delta B}{B}$
$Z = A^n$ relative error multiplies by the power: $\frac{\Delta Z}{Z} = n\frac{\Delta A}{A}$

Errors always add, even in a subtraction or a division. A negative power, or a variable in the denominator, still adds its error.

Past question (NEET (UG) 2025, Q42). A physical quantity $P$ is related to four observations $a$, $b$, $c$ and $d$ as follows: $P = a^3b^2/c\sqrt{d}$. The percentage errors of measurement in $a$, $b$, $c$ and $d$ are 1%, 3%, 2%, and 4% respectively. The percentage error in the quantity $P$ is

(A) 10% (B) 2% (C) 13% (D) 15%

Official answer: (C). Multiply each percentage by the size of its power and add: $3(1) + 2(3) + 1(2) + \frac{1}{2}(4) = 3 + 6 + 2 + 2 = 13\%$.

A second example, with a pendulum: $g = \frac{4\pi^2 L}{T^2}$. If $L$ has a 0.1% error and $T$ a 0.25% error, then $\frac{\Delta g}{g} = 0.1 + 2(0.25) = 0.6\%$. The time measurement dominates, which is why students time 20 or more oscillations rather than one.

Significant figures

Counting rules

  • All non-zero digits count: 7.65 has 3.
  • Zeros between non-zero digits count: 5.008 has 4.
  • Leading zeros never count: 0.0052 has 2.
  • Trailing zeros after a decimal point count: 2.50 has 3.
  • Trailing zeros in a whole number are ambiguous; write it in powers of ten ($2.0 \times 10^3$ has 2).
  • Changing units does not change significant figures: 9.0 cm $= 0.090$ m, still 2.

Arithmetic rules

  • Multiplying or dividing: keep as many significant figures as the least precise value.
  • Adding or subtracting: keep as many decimal places as the value with the fewest.

For example, $2.5 + 3.14 + 0.123 = 5.763$, reported as 5.8 (one decimal place, from 2.5).

Past question (NEET (UG) 2026, cancelled May sitting, Q149). Each side of a metallic cube of mass 5.580 kg is measured to the 9.0 cm . Keeping the significant figures in view, the density of the material of the cube can be best expressed as $X \times {10}^{3}\ \mathrm{kg}{\ \mathrm{m}}^{-3}$ where the value of $X$ is:

(A) 7.654 (B) 7.6 (C) 7.65 (D) 7.7

Official answer: (D). Volume $= (0.090)^3 = 7.29 \times 10^{-4}$ m³, and density $= \frac{5.580}{7.29 \times 10^{-4}} \approx 7654$ kg/m³. The side, 9.0 cm, has only 2 significant figures, so the result keeps 2: $7.7 \times 10^3$. Option (A) is the unrounded calculator value.

A study plan for this chapter

  1. Build the dimension table yourself from formulas, then test yourself by covering the right column.
  2. Practise 20 error-propagation questions; they are mechanical once the three rules are automatic.
  3. Practise 10 significant-figure questions, including one with unit conversion.
  4. Take a 15-minute chapter test on the NEET dashboard (login needed).

The chapter is the first in the Units, Measurement and Kinematics book, in English, Hindi and Telugu, and its past questions are collected in the Units and Measurements PYQ post. The maths for NEET Physics guide covers the powers-of-ten handling this chapter relies on, and the mechanics formula sheet is the natural next step. The syllabus unit is listed on the NEET syllabus page, and chapter shares are on the weightage page.

Frequently asked questions

How many questions come from units and dimensions in NEET?

In the 10 NEET papers from 2021 to 2026 on Pareeksha, Units and Measurements had 16 questions, about one or two per paper. Measurement questions with vernier callipers and screw gauge add a few more, tagged on Pareeksha under Experimental Skills.

Which quantities have no dimensions?

Angle, solid angle, strain, refractive index, relative density, dielectric constant, coefficient of friction and Poisson's ratio. Their units, where they have one (radian, steradian), do not change this.

Do percentage errors ever subtract?

No. Errors always add in the worst case, whether the quantities are added, subtracted, multiplied or divided. Only the weights change: powers multiply the relative error, and square roots halve it.

How should I round in NEET answers?

Follow the question. If it asks you to keep significant figures in view, apply the rules strictly; the unrounded value is often a wrong option. If it does not, pick the option closest to your calculated value.

Can dimensional analysis prove a formula is correct?

No. It can prove a formula wrong if the dimensions do not match, but a dimensionally correct formula can still have the wrong constant, such as $\frac{1}{2}$ or $2\pi$.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.