LATEST
NEETBy Pareeksha Editorial Team· ⏱ 8 min read

Units and Measurements NEET PYQs: Solved Questions

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Units and Measurements NEET PYQs: Solved Questions
On this page
  1. How often NEET asks Units and Measurements
  2. What the questions test
  3. Solved NEET past questions
  4. 1. Significant figures in a density calculation
  5. 2. Dimensions of a combination of constants
  6. 3. Percentage error with powers and a square root
  7. 4. Quantities with the dimensions of solid angle
  8. 5. The quantity with dimensions of inverse mass
  9. Key formulas and facts
  10. Common traps
  11. How to study Units and Measurements
  12. Frequently asked questions
  13. How many questions come from Units and Measurements in NEET?
  14. Which topics in this chapter are asked most?
  15. Is this chapter worth studying if I am short of time?
  16. Are vernier caliper and screw gauge questions part of this chapter?

Units and Measurements is the first chapter of Class 11 Physics, and many students treat it as a warm-up. The past papers say otherwise. It is short, it needs almost no derivation, and it has become one of the more reliable sources of Physics questions in recent NEET papers. A student who learns dimensions and error rules properly can usually answer these questions in under a minute each.

This post uses Pareeksha's own counts from the digitised NEET and AIPMT past papers to show how often the chapter is asked, what the questions test, and how to prepare it. It then works through five past questions with their official answers.

How often NEET asks Units and Measurements

Across Pareeksha's 51 digitised papers from 1988 to 2026, 41 questions are tagged to this chapter. In the 18 NEET sittings from 2016 to 2026 (including re-exams and second phases), it had 21 of 531 tagged Physics questions, which places it 9th of 29 Physics chapters.

The recent trend matters more. In the 8 NEET papers from 2016 to 2020 the chapter had 5 questions, about 0.6 per paper. In the 10 papers from 2021 to 2026 it had 16, about 1.6 per paper, or 4.6% of the 347 tagged Physics questions in that period.

NEET year (all sittings combined) Questions
2013 2
2016 0
2017 0
2018 1
2019 1
2020 3
2021 2
2022 6
2023 3
2024 2
2025 1
2026 2

The 2022 figure covers two sittings, and 2023, 2024 and 2026 also had more than one paper each, so read the table as "about one to two questions per paper". A few digitised papers are a few questions short of the full paper, so treat these as close counts rather than exact ones. The chapter-wise picture for all of Physics is on the NEET chapter-wise weightage page.

What the questions test

The past questions fall into four clear groups.

  1. Dimensions of a quantity or a constant. Find the dimensions of G, of Planck's constant, or of a combination such as $\sigma_s k_B^{-1} b$. These test whether you know the defining equation of each constant.
  2. Dimensionless quantities and matching dimensions. Which quantities share the dimensions of solid angle, strain or refractive index; which pairs (work and torque, for example) share dimensions.
  3. Error propagation. Given $P = a^m b^n / c^p$ and the percentage errors in a, b and c, find the percentage error in P.
  4. Significant figures and rounding. Compute a density or an area and round the answer to the right number of significant figures.

Instrument questions on the vernier caliper and the screw gauge are tagged under the experimental skills chapter, which has its own post on experiments in measurement, mechanics and heat.

Solved NEET past questions

Each question below is copied from the paper with its official answer. The working is ours.

1. Significant figures in a density calculation

From NEET 2026 (cancelled May sitting), Q149.

Each side of a metallic cube of mass 5.580 kg is measured to the 9.0 cm . Keeping the significant figures in view, the density of the material of the cube can be best expressed as $X \times {10}^{3}\ \mathrm{kg}{\ \mathrm{m}}^{-3}$ where the value of $X$ is:

  • (A) 7.654
  • (B) 7.6
  • (C) 7.65
  • (D) 7.7

Official answer: (D)

Solution. Volume $= (9.0\ \mathrm{cm})^3 = 729\ \mathrm{cm^3} = 7.29 \times 10^{-4}\ \mathrm{m^3}$. Density $= 5.580 / (7.29 \times 10^{-4}) \approx 7.654 \times 10^3\ \mathrm{kg\,m^{-3}}$. In a product or quotient, the answer keeps as many significant figures as the least precise input. The mass has four significant figures, but the side, 9.0 cm, has only two. So the density is $7.7 \times 10^3\ \mathrm{kg\,m^{-3}}$. Option (A) is the unrounded value, which is the trap.

2. Dimensions of a combination of constants

From NEET 2026 re-exam, Q37.

Consider that $\sigma_s$, $k_B$, b represent Stefan-Boltzmann constant, Boltzmann constant and Wien's displacement law constant, respectively. The dimension of $\sigma_s k_B^{-1} b$ is :

  • (A) $[\mathrm{L^{-1}T^{-1}K^{-2}}]$
  • (B) $[\mathrm{L^{-1}K^{-2}}]$
  • (C) $[\mathrm{L^{-1}T^{-1}K^{-3}}]$
  • (D) $[\mathrm{L^{-1}T^{-1}K^{-4}}]$

Official answer: (A)

Solution. Take each constant from its defining law. From $E = \sigma T^4$, where E is power per unit area, $[\sigma_s] = [\mathrm{MT^{-3}K^{-4}}]$. Boltzmann's constant is energy per kelvin, $[k_B] = [\mathrm{ML^2T^{-2}K^{-1}}]$. From $\lambda_m T = b$, $[b] = [\mathrm{LK}]$. Then

$\dfrac{\sigma_s b}{k_B} = \dfrac{[\mathrm{MT^{-3}K^{-4}}][\mathrm{LK}]}{[\mathrm{ML^2T^{-2}K^{-1}}]} = [\mathrm{L^{-1}T^{-1}K^{-2}}]$

Mass cancels. Work the powers of each symbol separately and the answer falls out.

3. Percentage error with powers and a square root

From NEET 2025, Q42.

A physical quantity $P$ is related to four observations $a$, $b$, $c$ and $d$ as follows: $P = a^3b^2/c\sqrt{d}$. The percentage errors of measurement in $a$, $b$, $c$ and $d$ are 1%, 3%, 2%, and 4% respectively. The percentage error in the quantity $P$ is

  • (A) 10%
  • (B) 2%
  • (C) 13%
  • (D) 15%

Official answer: (C)

Solution. Maximum fractional errors add, each multiplied by the power it carries, whether the quantity is in the numerator or the denominator:

$\dfrac{\Delta P}{P} = 3\dfrac{\Delta a}{a} + 2\dfrac{\Delta b}{b} + \dfrac{\Delta c}{c} + \dfrac{1}{2}\dfrac{\Delta d}{d} = 3 + 6 + 2 + 2 = 13\%$

A student who subtracts the denominator errors gets a smaller number, but errors never cancel.

4. Quantities with the dimensions of solid angle

From NEET 2024, Q21.

The quantities which have the same dimensions as those of solid angle are :

  • (A) strain and arc
  • (B) angular speed and stress
  • (C) strain and angle
  • (D) stress and angle

Official answer: (C)

Solution. Solid angle is area divided by radius squared, so it is dimensionless. Strain (change in length over length) and plane angle (arc over radius) are also dimensionless. An arc is a length, stress is $[\mathrm{ML^{-1}T^{-2}}]$ and angular speed is $[\mathrm{T^{-1}}]$. Only option (C) has two dimensionless quantities.

5. The quantity with dimensions of inverse mass

From NEET 2023 Manipur, Q132.

The mechanical quantity, which has dimensions of reciprocal of mass $({\mathrm{M}}^{-1})$ is :

  • (A) angular momentum
  • (B) coefficient of thermal conductivity
  • (C) torque
  • (D) gravitational constant

Official answer: (D)

Solution. From $F = Gm_1m_2/r^2$, $G = Fr^2/m^2$, so $[G] = [\mathrm{M^{-1}L^3T^{-2}}]$. Angular momentum is $[\mathrm{ML^2T^{-1}}]$, torque is $[\mathrm{ML^2T^{-2}}]$ and thermal conductivity is $[\mathrm{MLT^{-3}K^{-1}}]$. Only G has mass to the power −1.

Key formulas and facts

Error rules

  • Sum or difference, $Z = A \pm B$: absolute errors add, $\Delta Z = \Delta A + \Delta B$.
  • Product or quotient, $Z = A^m B^n / C^p$: $\dfrac{\Delta Z}{Z} = m\dfrac{\Delta A}{A} + n\dfrac{\Delta B}{B} + p\dfrac{\Delta C}{C}$.
  • A square root halves the error; a cube triples it.

Significant figures

  • In multiplication and division, keep the least number of significant figures among the inputs.
  • In addition and subtraction, keep the least number of decimal places.
  • Trailing zeros after a decimal point count (9.0 has two); trailing zeros in a whole number without a decimal point are ambiguous, which is why scientific notation is used.

Dimensions worth memorising

Quantity Dimensions
Gravitational constant G $[\mathrm{M^{-1}L^3T^{-2}}]$
Planck's constant h, angular momentum $[\mathrm{ML^2T^{-1}}]$
Work, energy, torque $[\mathrm{ML^2T^{-2}}]$
Pressure, stress, Young's modulus $[\mathrm{ML^{-1}T^{-2}}]$
Surface tension, spring constant $[\mathrm{MT^{-2}}]$
Coefficient of viscosity $[\mathrm{ML^{-1}T^{-1}}]$
Boltzmann constant $[\mathrm{ML^2T^{-2}K^{-1}}]$
Stefan-Boltzmann constant $[\mathrm{MT^{-3}K^{-4}}]$
Thermal conductivity $[\mathrm{MLT^{-3}K^{-1}}]$

Common traps

  • Choosing the unrounded answer. In significant-figure questions, the calculator value is almost always one of the options. Round last, and round to the least precise input.
  • Subtracting errors. Errors in the denominator still add. There is no case in NEET-level error analysis where errors cancel.
  • Forgetting the power on a root. $\sqrt{d}$ contributes half of d's percentage error, not all of it.
  • Dimensionless is not unitless. Plane angle and solid angle have units (radian, steradian) but no dimensions.
  • Same dimensions, different quantities. Work and torque share dimensions, as do Planck's constant and angular momentum. Questions like to test this.
  • Mixing up which constant is which. Write the defining equation for each constant first, then find the dimensions. Guessing from memory is where most mistakes happen.

How to study Units and Measurements

This is a chapter where a single clean summary page does most of the work.

  1. Read the chapter in the Pareeksha book Units, Measurement and Kinematics, chapter 1. It is also available in Hindi and Telugu.
  2. Make one page with the error rules, the significant-figure rules and a table of 20 dimensions. Revise it every week until the exam.
  3. Solve the past questions on this chapter. All 51 NEET and AIPMT papers are on the NEET past papers page, and the recent ones carry the most weight.
  4. Take the 15-question chapter test for Units and Measurements in the NEET section of your dashboard. You need to log in to take chapter tests.
  5. Move on to kinematics, where dimensions keep turning up as a quick check: Motion in a Straight Line PYQs and Motion in a Plane PYQs.

For where this chapter sits in your overall Physics plan, see the NEET Physics preparation strategy.

Frequently asked questions

How many questions come from Units and Measurements in NEET?

In the 10 NEET papers from 2021 to 2026 on Pareeksha, the chapter had 16 questions, about 1.6 per paper. That is a clear rise from the 2016–2020 papers, which averaged about 0.6 per paper.

Which topics in this chapter are asked most?

Dimensional analysis and error propagation lead, followed by significant figures. Dimension questions increasingly use less familiar constants, such as the Stefan-Boltzmann and Wien constants, so learn the defining equation of every constant in the syllabus.

Is this chapter worth studying if I am short of time?

Yes. It is one of the shortest Physics chapters, and its questions are mostly rule-based. A few hours of focused work and a weekly revision of your summary page should cover what the past papers ask.

Are vernier caliper and screw gauge questions part of this chapter?

On Pareeksha they are tagged under the experimental skills chapter. The least count and zero-error ideas are closely linked, though, so study both together.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.