LATEST
NEETBy Pareeksha Editorial Team· ⏱ 8 min read

Experiments in Measurement NEET PYQs: Vernier, Screw Gauge

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Experiments in Measurement NEET PYQs: Vernier, Screw Gauge
On this page
  1. The experiments in the syllabus
  2. How often NEET asks these experiments
  3. What the questions have tested
  4. Solved NEET past questions
  5. Question 1 (NEET 2021, Q6)
  6. Question 2 (NEET 2020 Phase 1, Q146)
  7. Question 3 (NEET 2024, Q14)
  8. Question 4 (NEET 2025, Q25)
  9. Question 5 (NEET 2026, May paper, Q168)
  10. Formulas to know for each experiment
  11. Common traps
  12. How to study this chapter
  13. Frequently asked questions
  14. How many questions come from experimental skills in NEET?
  15. Which experiments are asked most?
  16. Do I need to have done the experiments in a lab?
  17. Is the experimental skills unit worth studying if it is asked so rarely?
  18. Where is the list of experiments for NEET?

The Experimental Skills unit is the part of the NEET Physics syllabus that students know least about. The good news is that it is small and its questions so far have been predictable. Almost every past question on the measurement and mechanics experiments has been about reading an instrument: a vernier calliper, a screw gauge, or the timing of a simple pendulum.

This post covers the first half of the unit: the experiments on measurement, mechanics and heat. The electricity, optics and electronics experiments are in a separate post.

The experiments in the syllabus

The NEET (UG) 2025 syllabus published on NTA's website lists 18 experiments under Unit 20, Experimental Skills, and asks for "familiarity with the basic approach and observations" of each. The first nine are the measurement, mechanics and heat experiments. In our own words:

No. Experiment What it measures
1 Vernier callipers Internal and external diameter, and depth of a vessel
2 Screw gauge Thickness of a thin sheet or diameter of a wire
3 Simple pendulum Energy loss, from a graph of amplitude squared against time
4 Metre scale Mass of an object by the principle of moments
5 Young's modulus Elasticity of the material of a metal wire
6 Surface tension Surface tension of water by capillary rise, and the effect of detergent
7 Viscosity Coefficient of viscosity from the terminal velocity of a falling ball
8 Resonance tube Speed of sound in air at room temperature
9 Method of mixtures Specific heat capacity of a solid and of a liquid

Check the NEET 2027 information bulletin for the syllabus when it is released, in case the list changes.

How often NEET asks these experiments

Rarely, and only recently. Pareeksha's 51 digitised NEET and AIPMT papers (1988–2026) have just 8 questions tagged to this chapter, all of them from 2020 onward. None of the AIPMT papers had one.

Year NEET sittings in our data Questions
2016–2019 6 0
2020 2 2
2021 1 1
2022 2 0
2023 2 0
2024 2 1
2025 1 1
2026 2 3

In the 10 sittings from 2021 to 2026, that is 6 of 347 Physics questions, about 1.7%. It ranks 27th of the 29 Physics chapters in our 2016–2026 count. So expect zero or one question per paper. But the 2026 papers had three between them, and each one was a quick, sure four marks for students who knew the instruments. See the full ranking on the NEET chapter-wise weightage page.

What the questions have tested

Of the 8 tagged questions:

  • 3 on the vernier calliper: least count, and one with a zero error to correct.
  • 2 on the screw gauge: a reading, and the link between pitch and least count.
  • 1 on the simple pendulum: finding the length from a timing.
  • 1 on the spherometer: what it measures on a lens surface.
  • 1 on index correction on an optical bench, which really belongs to the optics experiments.

None so far on Young's modulus, surface tension, viscosity, the resonance tube or the method of mixtures as experiments. Their formulas still appear in the regular chapters, such as Mechanical Properties of Solids and Mechanical Properties of Fluids.

Solved NEET past questions

Each question is copied from the paper with its official answer. The explanations are ours.

Question 1 (NEET 2021, Q6)

A screw gauge gives the following readings when used to measure the diameter of a wire

Main scale reading : 0 mm

Circular scale reading : 52 divisions

Given that 1 mm on main scale corresponds to 100 divisions on the circular scale. The diameter of the wire from the above data is :

  • (A) 0.52 cm
  • (B) 0.026 cm
  • (C) 0.26 cm
  • (D) 0.052 cm

Answer: (D)

Least count $= \frac{1\ \text{mm}}{100} = 0.01$ mm. Reading $= 0 + 52 \times 0.01 = 0.52$ mm $= 0.052$ cm. Option (A) is the answer you get if you forget to convert millimetres to centimetres. Paper: NEET 2021.

Question 2 (NEET 2020 Phase 1, Q146)

A screw gauge has least count of 0.01 mm and there are 50 divisions in its circular scale.

The pitch of the screw gauge is :

  • (A) 0.01 mm
  • (B) 0.25 mm
  • (C) 0.5 mm
  • (D) 1.0 mm

Answer: (C)

Least count = pitch ÷ number of circular divisions, so pitch $= 0.01 \times 50 = 0.5$ mm. Paper: NEET 2020 Phase 1.

Question 3 (NEET 2024, Q14)

In a vernier calipers, $(N+1)$ divisions of vernier scale coincide with $N$ divisions of main scale. If 1 MSD represents 0.1 mm, the vernier constant (in cm) is :

  • (A) $100N$
  • (B) $10(N+1)$
  • (C) $\frac{1}{10N}$
  • (D) $\frac{1}{100(N+1)}$

Answer: (D)

$1\ \text{VSD} = \frac{N}{N+1}$ MSD, so the vernier constant is $1 - \frac{N}{N+1} = \frac{1}{N+1}$ MSD. With 1 MSD $= 0.1$ mm $= \frac{1}{100}$ cm, it is $\frac{1}{100(N+1)}$ cm. Paper: NEET 2024.

Question 4 (NEET 2025, Q25)

Consider the diameter of a spherical object being measured with the help of a Vernier callipers. Suppose its 10 Vernier Scale Divisions (V.S.D.) are equal to its 9 Main Scale Divisions (M.S.D.). The least division in the M.S. is 0.1 cm and the zero of V.S. is at $x = 0.1$ cm when the jaws of Vernier callipers are closed. If the main scale reading for the diameter is $M = 5$ cm and the number of coinciding vernier division is 8, the measured diameter after zero error correction, is

  • (A) 5.18 cm
  • (B) 5.08 cm
  • (C) 4.98 cm
  • (D) 5.00 cm

Answer: (C)

Least count $= 0.1 - 0.09 = 0.01$ cm. Observed reading $= 5 + 8 \times 0.01 = 5.08$ cm. With the jaws closed the vernier zero sits at +0.1 cm, a positive zero error, so subtract it: $5.08 - 0.1 = 4.98$ cm. Option (B) is the uncorrected reading. Paper: NEET 2025.

Question 5 (NEET 2026, May paper, Q168)

Savitha, a XI standard student, while conducting an experiment to determine the effective length of a simple pendulum $L$, notes down the data of time taken to complete 30 oscillations as 60 s and hence calculates the length of the simple pendulum as: (Take ${\pi}^{2}=9.8$, and $g=9.8\ \mathrm{m}/{\mathrm{s}}^{2}$ )

  • (A) 0.75 m
  • (B) 1.5 m
  • (C) 2 m
  • (D) 1 m

Answer: (D)

Time period $T = 60/30 = 2$ s. From $T = 2\pi\sqrt{L/g}$, $L = \frac{gT^2}{4\pi^2} = \frac{9.8 \times 4}{4 \times 9.8} = 1$ m. The question gives $\pi^2 = 9.8$ so that the numbers cancel. Paper: NEET 2026 (May sitting, later cancelled).

Formulas to know for each experiment

Experiment Formula
Vernier callipers Least count $= 1\ \text{MSD} - 1\ \text{VSD}$; reading $=$ MSR $+ n \times$ LC; corrected $=$ observed $-$ zero error (with sign)
Screw gauge Least count $=$ pitch / circular divisions; reading $=$ MSR $+$ CSR $\times$ LC $-$ zero error
Simple pendulum $T = 2\pi\sqrt{L/g}$; graph of $L$ against $T^2$ is a straight line with slope $g/4\pi^2$
Metre scale Clockwise moment $=$ anticlockwise moment about the pivot
Young's modulus $Y = \frac{MgL}{\pi r^2 \Delta l}$
Surface tension $T = \frac{rh\rho g}{2\cos\theta}$
Viscosity $\eta = \frac{2r^2(\rho - \sigma)g}{9v}$, with $v$ the terminal velocity
Resonance tube $v = 2f(l_2 - l_1)$; end correction $e = \frac{l_2 - 3l_1}{2}$
Method of mixtures Heat lost by the hot body $=$ heat gained by the cold body and the calorimeter

Common traps

  • Sign of zero error. If the vernier zero is to the right of the main scale zero, the error is positive and you subtract it. Many students add it.
  • Units. Main scale readings in cm, least counts in mm, answers in cm. Convert once, at the end.
  • Effective length of a pendulum. It is measured from the point of suspension to the centre of the bob, not to its bottom.
  • Pitch and least count. Pitch is the distance the screw moves in one full turn. Least count is pitch divided by the number of circular divisions.

How to study this chapter

You do not need a lab to answer these questions, but you do need to have worked through each instrument on paper.

  1. Read the chapter in the Experimental Skills book on Pareeksha (also in Hindi and Telugu). It explains each experiment with worked readings.
  2. Practise ten vernier and screw-gauge readings with zero errors of both signs. This one skill covers most of the past questions.
  3. Revise errors and significant figures alongside, from Units and Measurements.
  4. Take the chapter test in the NEET chapter-wise tests (login needed), and look at all past questions on the NEET past papers page.
  5. For the whole unit in one place, read our guide to NEET experimental skills.

Frequently asked questions

How many questions come from experimental skills in NEET?

Very few. In the 10 NEET sittings from 2021 to 2026 on Pareeksha, 6 Physics questions were tagged to the measurement, mechanics and heat experiments, and none to the electricity, optics and electronics experiments. Expect zero or one per paper.

Which experiments are asked most?

The vernier calliper and the screw gauge. Five of the eight tagged questions in our data were on these two instruments.

Do I need to have done the experiments in a lab?

No. NEET questions test the principle, the formula and how a reading is taken, not hands-on skill. Working through readings on paper is enough, though seeing the instruments once helps.

Is the experimental skills unit worth studying if it is asked so rarely?

Yes, because it is short. The vernier and screw-gauge part takes one or two hours, and a question on it is almost always quick to answer.

Where is the list of experiments for NEET?

The list is in Unit 20 of the NEET Physics syllabus. The table in this post follows the NEET (UG) 2025 syllabus text; check the NEET 2027 information bulletin when it is published.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.