LATEST
NEETBy Pareeksha Editorial Team· ⏱ 7 min read

Mechanical Properties of Fluids NEET PYQs: Solved Qs

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Mechanical Properties of Fluids NEET PYQs: Solved Qs
On this page
  1. How often NEET asks Mechanical Properties of Fluids
  2. What the questions test
  3. Solved NEET past questions
  4. 1. How deep can a submarine go
  5. 2. Lifting a disc off water
  6. 3. Pressure is not a vector
  7. 4. What a venturimeter works on
  8. 5. A deflating balloon (a harder one)
  9. Key formulas
  10. Common traps
  11. How to study Mechanical Properties of Fluids
  12. Frequently asked questions
  13. How many NEET questions come from Mechanical Properties of Fluids?
  14. Why are there so few AIPMT questions on fluids?
  15. Which topic in fluids is asked most?
  16. Is the balloon question typical of NEET?

Mechanical Properties of Fluids covers pressure, buoyancy, Bernoulli's principle, viscosity and surface tension. It is a chapter that NEET asks much more than the old AIPMT did. In Pareeksha's data, the AIPMT papers from 1988 to 2015 have only 3 questions on it, while the NEET papers from 2021 to 2026 have 13. If you are using older question banks to prepare, this chapter is likely under-practised.

This post uses Pareeksha's own counts from the digitised NEET and AIPMT past papers, then works through five past questions with their official answers.

How often NEET asks Mechanical Properties of Fluids

Across Pareeksha's 51 digitised papers from 1988 to 2026, 24 questions are tagged to this chapter. In the 18 NEET sittings from 2016 to 2026, it had 19 of 531 tagged Physics questions, placing it 11th of 29 Physics chapters.

The 8 NEET papers from 2016 to 2020 had 6 questions, about 0.75 per paper. The 10 papers from 2021 to 2026 had 13, about 1.3 per paper, or 3.7% of the 347 tagged Physics questions in that period.

NEET year (all sittings combined) Questions
2013 2
2016 1
2017 0
2018 1
2019 2
2020 2
2021 1
2022 3
2023 3
2024 1
2025 2
2026 3

Some years had more than one sitting, and a few digitised papers are a few questions short, so treat these as close counts. The full Physics table is on the NEET chapter-wise weightage page.

What the questions test

  1. Hydrostatic pressure. Absolute and gauge pressure at a depth, Pascal's law and the hydraulic lift.
  2. Surface tension. Force on a disc or ring, excess pressure in drops and bubbles, capillary rise.
  3. Fluid flow. Equation of continuity, Bernoulli's principle and its devices (venturimeter, Torricelli's law).
  4. Viscosity. Stokes' law and terminal velocity.
  5. Scalars and vectors, units and dimensions. Short conceptual questions on pressure, surface tension and viscosity.

Solved NEET past questions

Each question below is copied from the paper with its official answer. The working is ours.

1. How deep can a submarine go

From NEET 2026 (cancelled May sitting), Q179.

A submarine is designed to withstand an absolute pressure of 100 atm . How deep can it go below the water surface?

(Consider the density of water $=1000\ \mathrm{kg}{\ \mathrm{m}}^{-3}$, $1\ \mathrm{atm}=1 \times {10}^{5}\ \mathrm{Pa}$ and gravitational acceleration $g=10\ \mathrm{m}/{\mathrm{s}}^{2}$ )

  • (A) 990 m
  • (B) 9900 m
  • (C) 99 m
  • (D) 9000 m

Official answer: (A)

Solution. Absolute pressure at depth h is $P = P_0 + \rho gh$. The water column supplies $100 - 1 = 99$ atm $= 99 \times 10^5$ Pa. So $h = \frac{99 \times 10^5}{1000 \times 10} = 990$ m. The word "absolute" is the key; ignoring the atmosphere gives 1000 m, which is not an option, and slipping a power of ten gives (B) or (C).

2. Lifting a disc off water

From NEET 2024, Q31.

A thin flat circular disc of radius 4.5 cm is placed gently over the surface of water. If surface tension of water is $0.07\ \mathrm{N\,m^{-1}}$, then the excess force required to take it away from the surface is :

  • (A) 1.98 mN
  • (B) 99 N
  • (C) 19.8 mN
  • (D) 198 N

Official answer: (C)

Solution. Surface tension acts along the line of contact, which for a disc is its rim: $F = S \times 2\pi r = 0.07 \times 2\pi \times 0.045 \approx 0.0198$ N $= 19.8$ mN. A ring would have two lines of contact (inner and outer edge) and twice this force; a disc has one.

3. Pressure is not a vector

From NEET 2023 Manipur, Q146.

Which of the following statements is not true?

  • (A) Coefficient of viscosity is a scalar quantity
  • (B) Surface tension is a scalar quantity
  • (C) Pressure is a vector quantity
  • (D) Relative density is a scalar quantity

Official answer: (C)

Solution. Pressure at a point in a fluid acts equally in all directions, so it has no direction of its own and is a scalar. The force it produces on a surface is a vector, which is what misleads students. Viscosity coefficient, surface tension and relative density are scalars too.

4. What a venturimeter works on

From NEET 2023, Q20.

The venturi-meter works on :

  • (A) Huygen's principle
  • (B) Bernoulli's principle
  • (C) The principle of parallel axes
  • (D) The principle of perpendicular axes

Official answer: (B)

Solution. In the narrow throat of a venturimeter, the fluid speeds up (continuity) and its pressure falls (Bernoulli's principle). The pressure difference between the wide and narrow parts gives the flow rate.

5. A deflating balloon (a harder one)

From NEET 2025, Q24.

A balloon is made of a material of surface tension $S$ and its inflation outlet (from where gas is filled in it) has small area $A$. It is filled with a gas of density $\rho$ and takes a spherical shape of radius $R$. When the gas is allowed to flow freely out of it, its radius $r$ changes from $R$ to 0 (zero) in time $T$. If the speed $v(r)$ of gas coming out of the balloon depends on $r$ as $r^a$ and $T\propto S^{\alpha}A^{\beta}\rho^{\gamma}R^{\delta}$ then

  • (A) $a=\frac12,\ \alpha=\frac12,\ \beta=-1,\ \gamma=+1,\ \delta=\frac32$
  • (B) $a=-\frac12,\ \alpha=-\frac12,\ \beta=-1,\ \gamma=-\frac12,\ \delta=\frac52$
  • (C) $a=-\frac12,\ \alpha=-\frac12,\ \beta=-1,\ \gamma=\frac12,\ \delta=\frac72$
  • (D) $a=\frac12,\ \alpha=\frac12,\ \beta=-\frac12,\ \gamma=\frac12,\ \delta=\frac72$

Official answer: (C)

Solution. The excess pressure inside scales as $\frac{S}{r}$. By Bernoulli, $\frac{1}{2}\rho v^2 \approx \Delta P$, so $v \propto \sqrt{\frac{S}{\rho r}} \propto r^{-1/2}$: $a = -\frac{1}{2}$. That alone rules out (A) and (D). The volume lost per second equals the outflow: $-4\pi r^2\frac{dr}{dt} = Av \propto A\sqrt{\frac{S}{\rho}}\,r^{-1/2}$. So $r^{5/2}\,dr \propto A\sqrt{\frac{S}{\rho}}\,dt$, and integrating from R to 0 gives $T \propto S^{-1/2}A^{-1}\rho^{1/2}R^{7/2}$. Between (B) and (C), a denser gas must take longer to escape, so γ is positive: (C). This question is long, but the elimination route gets the answer in about a minute.

Key formulas

Idea Formula
Pressure at depth h $P = P_0 + \rho gh$; gauge pressure $\rho gh$
Hydraulic lift $\frac{F_1}{A_1} = \frac{F_2}{A_2}$
Buoyant force $\rho_{liquid} V_{immersed}\, g$
Continuity $A_1v_1 = A_2v_2$
Bernoulli $P + \frac{1}{2}\rho v^2 + \rho gh = \text{constant}$
Speed of efflux $v = \sqrt{2gh}$
Stokes' law $F = 6\pi\eta rv$
Terminal velocity $v_t = \frac{2r^2(\rho - \sigma)g}{9\eta}$
Surface tension force on a line $F = S \times \text{length of contact}$
Excess pressure: drop, soap bubble $\frac{2S}{r}$, $\frac{4S}{r}$
Capillary rise $h = \frac{2S\cos\theta}{\rho gr}$

Common traps

  • Absolute versus gauge pressure. "Absolute" includes the atmosphere; "gauge" does not.
  • Counting surfaces. A soap bubble has two surfaces, a drop has one; a ring lifted from water has two edges, a disc has one.
  • Terminal velocity scales as $r^2$. Doubling the radius of a sphere gives four times the terminal velocity.
  • Pressure as a vector. It is a scalar; force is the vector.
  • Bernoulli where it does not apply. It holds along a streamline for steady, non-viscous, incompressible flow.

How to study Mechanical Properties of Fluids

  1. Read chapter 3 of the Pareeksha book Gravitation and Properties of Matter, also available in Hindi and Telugu.
  2. Treat it as two chapters: fluid mechanics (pressure, flow, viscosity) and surface tension. Make a summary page for each.
  3. Solve the chapter's past questions on the NEET past papers page. Since the AIPMT papers have few questions on it, the NEET papers from 2016 onward are your main source.
  4. Take the 15-question chapter test in the NEET section of your dashboard (login needed).
  5. Read the related posts: Mechanical Properties of Solids PYQs (the previous chapter in the same book), Thermal Properties of Matter PYQs and Oscillations PYQs, where buoyancy returns as the restoring force for a floating body.

Frequently asked questions

How many NEET questions come from Mechanical Properties of Fluids?

In the 10 NEET papers from 2021 to 2026 on Pareeksha, the chapter had 13 questions, about 1.3 per paper. It ranks 11th of 29 Physics chapters across the 2016–2026 papers.

Why are there so few AIPMT questions on fluids?

Pareeksha's data has only 3 AIPMT questions on this chapter from 1988 to 2015. The NEET papers ask it far more often, so practise from the NEET-era papers and chapter tests.

Which topic in fluids is asked most?

Pressure at depth and surface tension appear most often in the recent papers, followed by Bernoulli's principle and viscosity.

Is the balloon question typical of NEET?

No. Most questions in this chapter are one-step. The 2025 balloon question is an exception, and even that one can be answered by elimination once you find the exponent of r.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.