Exam Strategy
Current Electricity usually gives 3 to 4 questions in NEET Physics, which is 12 to 16 marks, and most of them are short numericals you can finish in under a minute. The best way to study it is to learn about fifteen core formulas well, then solve many small circuits until series, parallel, cells and bridges feel automatic.
Chapter weightage and priority
| Chapter | Typical NEET questions | Priority | Why |
|---|---|---|---|
| 1. Electric Current, Drift Velocity and Mobility | 0–1 | Medium | I = neAv_d ratio questions and drift-speed concepts come up often in a single question |
| 2. Ohm's Law, Resistance and Resistivity | 0–1 | High | Stretching a wire, colour code and resistivity questions are quick and frequent |
| 3. Temperature Dependence of Resistance | 0–1 | Medium | One-line use of R = R0(1 + αΔT) and metal vs semiconductor behaviour |
| 4. Combinations of Resistors | 1–2 | High | Almost every circuit question needs series–parallel reduction |
| 5. Cells, EMF and Internal Resistance | 0–1 | High | Terminal voltage, cell combinations and maximum power are favourites |
| 6. Electrical Energy and Power | 0–1 | High | Bulb brightness in series and parallel, heater and bill questions |
| 7. Kirchhoff's Laws | 0–1 | High | Two-loop circuits and potential difference between points |
| 8. Wheatstone Bridge and Metre Bridge | 0–1 | Medium | Balance condition and metre-bridge null-point numericals |
Weightage is approximate, based on recent papers; NEET can ask from any part of the syllabus.
High-yield topics
I = neAv_d: ratio of drift speeds in wires of different thickness in series, or the drift speed of copper for a given current.
Mobility and conductivity: μ = eτ/m, σ = neμ = ne²τ/m; questions ask what changes when temperature or field changes.
Stretching a wire: new resistance when length becomes n times (n²R) or radius becomes 1/k times (k⁴R) at constant volume.
Colour code: read a four-band resistor value with its tolerance.
Temperature coefficient: R = R0(1 + αΔT); metal vs semiconductor vs alloy behaviour.
Series–parallel reduction: equivalent resistance, current and voltage division, symmetric networks (ring, cube, ladder).
Cell equations: V = E − Ir, short-circuit current E/r, finding E and r from two readings.
Cell combinations: series, parallel, mixed grouping and the condition for maximum current.
Maximum power transfer: R = r, P max = E²/4r, efficiency 50%.
Bulbs and heaters: R = V²/P, brightness in series and parallel, time to boil with coils in series or parallel.
Kirchhoff's laws: current in a branch of a two-loop circuit, potential difference between two points.
Bridges: balanced Wheatstone bridge shortcut and metre-bridge R/S = l/(100 − l).
Question types to expect
| Type | What it looks like | How to approach |
|---|---|---|
| Numerical | Find current, resistance, power or drift speed from given data | Write the one formula first, then substitute with units; keep powers of ten separate |
| Conceptual | What happens to v_d, R or brightness when something changes | Write the proportionality (v_d ∝ I/A, P ∝ V²) and reason with ratios |
| Statement-based | "How many of the following are correct?" | Mark each statement T or F in the margin before looking at the options |
| Match-the-column | Four quantities matched to units, values or behaviours | Fix the one match you are surest of, then eliminate options |
| Assertion–reason | A claim and a reason about a law or device | Check A and R separately first, then ask if R really causes A |
| Graph/diagram-based | V-I, I-t, R-T or power-vs-R graphs, or a circuit described in words | Read slope and area meanings: slope of V-I is R, area of I-t is charge |
Study plan
| Day | What to study | Practice target |
|---|---|---|
| 1 | Chapter 1: current, drift velocity, mobility | 20 MCQs + Level 4 set of Chapter 1 |
| 2 | Chapters 2 and 3: resistivity, stretching, colour code, temperature effects | 30 MCQs across both chapters |
| 3 | Chapter 4: series, parallel and symmetric networks | 30 MCQs, draw every circuit yourself |
| 4 | Chapter 5: cells, internal resistance, cell grouping, maximum power | 25 MCQs + 5 graph questions |
| 5 | Chapter 6: power, bulbs, heaters, energy bills | 25 MCQs, focus on bulbs in series and parallel |
| 6 | Chapters 7 and 8: Kirchhoff's laws and bridges | 30 MCQs, solve at least 8 two-loop circuits |
| 7 | Full revision with revision sheets; Unit Test and Mock Test 2 | 75 timed questions, then review every wrong answer |
Last 48 hours:
Day before yesterday: read all eight revision sheets and the Book-at-a-glance sheet once, slowly.
Yesterday: solve Mock Test 2 in 35 minutes and redo only the questions you got wrong.
Exam morning: read the 40 rapid-fire facts and the common mistakes checklist; no new topics.
Time-saving tricks
Stretching shortcut: at constant volume R ∝ L², so tripling the length gives 9R and halving the radius gives 16R. No need to find the new area.
Two in parallel: use product over sum, R1R2/(R1 + R2). For n equal resistors, R/n in parallel and nR in series, so their ratio is n².
Spot a balanced bridge: if P/Q = R/S, delete the middle arm and add the two sides as simple series–parallel.
Bulb brightness: in series the lower-wattage bulb (higher R) glows brighter; in parallel the higher-wattage bulb glows brighter.
Maximum power check: if a question asks for maximum power to R, put R = r and write E²/4r straight away.
Ring of wire: for a ring of total resistance R0 with terminals cutting it into fractions x and (1 − x), the resistance is R0·x(1 − x). Diametric points give R0/4.
Order-of-magnitude elimination: drift speed is about 10⁻⁴ m/s, relaxation time about 10⁻¹⁴ s and resistivity of copper about 10⁻⁸ Ω m. Reject options far from these.
Terminal voltage sign: discharging gives V less than E, charging gives V more than E. Use this to kill two options in cell questions.