Chapter 7: Kirchhoff's Laws
When a circuit cannot be broken into simple series and parallel parts, two rules solve it: charge is conserved at every junction, and energy is conserved round every loop.
What you will learn
State the junction rule and the loop rule and link each to a conservation law.
Apply sign conventions for resistors and cells without error.
Solve two-loop circuits by loop equations and by the node method.
Find the potential difference between any two points.
Handle cells that are being charged inside a network.
7.1 Junction rule
At any junction, the total current flowing in equals the total current flowing out:
This is conservation of charge. In a steady state, charge cannot pile up at a junction. It works like a traffic roundabout in Bengaluru: cars entering per minute must equal cars leaving per minute, or the roundabout fills up.
7.2 Loop rule
Go round any closed loop and add every rise and fall of potential. The total is zero:
This is conservation of energy. A charge that goes round a loop comes back to the same point and the same potential. The energy it gained from cells must equal the energy it gave up in resistors.
7.3 Sign conventions
Pick a direction to walk round the loop. Then use these signs:
| Element crossed | Direction of walk | Change in potential |
|---|---|---|
| Resistor R | Same as assumed current I | −IR |
| Resistor R | Against assumed current I | +IR |
| Cell E | From − terminal to + terminal | +E |
| Cell E | From + terminal to − terminal | −E |
The sign for a cell depends only on which terminal you meet first. It does not depend on the current. A cell's internal resistance is treated like any other resistor.
7.4 Method
Mark a current in every branch with an arrow. Guess directions freely.
Use the junction rule to cut down the number of unknowns.
Choose enough independent loops. For b branches and j junctions, you need b − j + 1 loop equations.
Write the loop equations with the sign table above.
Solve. A negative answer means the true current flows opposite to your arrow. Its size is still correct.
7.5 Worked two-loop circuit
Three branches join a top junction P to a bottom junction Q. The left branch has a 10 V cell and 2 Ω. The middle branch is a plain 2 Ω resistor. The right branch has an 8 V cell and 2 Ω. Both cells have their + terminal towards P.

Currents of 2 A and 1 A rise through the cell branches into P and leave together as 3 A down the middle resistor.
Take I₁ up the left branch, I₂ up the right branch and I₃ down the middle. The junction rule at P gives I₃ = I₁ + I₂.
Left loop (left branch and middle), walking up the left and down the middle:
Right loop (right branch and middle):
Subtracting, 2 − 2I₁ + 2I₂ = 0, so I₁ = I₂ + 1. Put this and I₃ = I₁ + I₂ into the second equation: 8 − 2I₂ − 2(2I₂ + 1) = 0, so I₂ = 1 A. Then I₁ = 2 A and I₃ = 3 A. Both cells are giving out energy.
7.6 Node method
Set the bottom junction Q at zero potential and call the top junction V. Each branch from P to Q carries (V − E)/R downwards, where E is the emf of any cell in it with + towards P. The junction rule at P gives:
For the circuit above: V = (10/2 + 8/2 + 0/2)/(1/2 + 1/2 + 1/2) = 9/1.5 = 6 V. So I₃ = 6/2 = 3 A, I₁ = (10 − 6)/2 = 2 A and I₂ = (8 − 6)/2 = 1 A. Same answers, less algebra.
This formula is fast for any set of branches joined between the same two junctions. Use it whenever you see that shape.
7.7 Potential difference between two points
To find V_A − V_B, start at B and walk to A along any path, adding the changes with the sign table. The total is V_A − V_B. Any path gives the same answer, which is a good check.
In a steady DC circuit, a branch with a capacitor carries no current. Treat it as a break, find the potentials, then the capacitor's charge is CV.
Worked example 7.1: At a junction, 5 A and 3 A flow in along two wires and 2 A flows out along a third. Find the current in the fourth wire.
Solution: In = 8 A. Out so far = 2 A. The fourth wire carries 6 A out of the junction.
Worked example 7.2: A 12 V cell and a 4 V cell are in one loop with their + terminals facing each other. The total resistance in the loop, including the cells, is 4 Ω. Find the current.
Solution: Walking round, the emfs oppose: 12 − 4 = 4I, so I = 2 A. It flows the way the 12 V cell pushes. The 4 V cell is being charged.
Worked example 7.3: In Worked example 7.2, the 4 V cell has internal resistance 1 Ω. Find its terminal voltage.
Solution: Current enters its + terminal, so it is charging. V = 4 + 2 × 1 = 6 V.
Worked example 7.4: Three branches join junctions P and Q. Branch 1: 12 V cell with 2 Ω. Branch 2: 3 V cell with 3 Ω. Branch 3: plain 3 Ω. Both cells have + towards P. Find the current in the 3 V cell.
Solution: V = (12/2 + 3/3 + 0)/(1/2 + 1/3 + 1/3) = 7/(7/6) = 6 V. Current down branch 2 = (6 − 3)/3 = 1 A. So 1 A flows into the 3 V cell at its + terminal. It is being charged. Check: branch 1 sends (12 − 6)/2 = 3 A up, and 1 + 2 = 3 A goes down.
Worked example 7.5: Two cells, 6 V and 3 V, each of internal resistance 1 Ω, are joined in parallel (like terminals together) across a 2 Ω load. Find the load current.
Solution: V = (6/1 + 3/1)/(1 + 1 + 1/2) = 9/2.5 = 3.6 V. Load current = 3.6/2 = 1.8 A.
Worked example 7.6: A branch runs from A through a 2 Ω resistor and then a 5 V cell to B. The cell's + terminal faces A. A current of 1 A flows from A to B. Find V_A − V_B.
Solution: Walk from A to B: across the resistor along the current, −2 V; across the cell from + to −, −5 V. So V_B = V_A − 7, and V_A − V_B = 7 V.
Worked example 7.7: A 9 V battery of internal resistance 1 Ω drives two 4 Ω resistors in series. The point between the two resistors is earthed. Find the potential of the battery's + terminal.
Solution: I = 9/9 = 1 A. From the + terminal, current goes through one 4 Ω resistor down to earth. So the + terminal is 4 V above earth: +4 V. The − terminal is at −4 V. The 1 V difference is lost inside the battery.
Quick revision
Junction rule: currents in = currents out (charge conservation).
Loop rule: sum of potential changes round a loop = 0 (energy conservation).
Resistor along I: −IR. Cell from − to +: +E.
Need b − j + 1 loop equations.
Negative answer = current opposite to the guess.
Branches between two junctions: V = Σ(E/R)/Σ(1/R).
Current into a cell's + terminal means it is charging: V = E + Ir.
NEET traps
Giving a cell a sign based on current direction. It depends only on which terminal you meet first.
Writing more loop equations than b − j + 1 and getting dependent equations.
Dropping the minus sign of a computed current and then using the wrong direction for a cell.
Forgetting a cell's internal resistance in the loop.
Assuming every cell in a network is discharging.
Using a non-closed path in the loop rule.
Practice MCQs: Chapter 7
Level 1: Concept check
1. Kirchhoff's junction rule follows from conservation of (a) energy (b) momentum (c) mass (d) charge
2. Kirchhoff's loop rule follows from conservation of (a) charge (b) energy (c) momentum (d) mass
3. Crossing a resistor R in the same direction as the current I, the change in potential is (a) +IR (b) zero (c) −IR (d) +2IR
4. Crossing a cell of emf E from its − terminal to its + terminal, the change in potential is (a) +E (b) −E (c) zero (d) it depends on the current
5. At a junction, 4 A and 6 A flow in and 3 A flows out along a third wire. The fourth wire carries (a) 13 A in (b) 1 A out (c) 7 A out (d) 3 A in
6. Solving a Kirchhoff problem gives a branch current of −2 A. This means (a) there is an error (b) the current is zero (c) the branch is open (d) 2 A flows opposite to the assumed direction
7. The algebraic sum of potential changes round any closed loop is (a) zero (b) equal to the total emf (c) always positive (d) equal to IR
8. Kirchhoff's laws can be applied to (a) series circuits only (b) any electrical network (c) parallel circuits only (d) circuits with one cell only
9. A circuit has 3 branches and 2 junctions. The number of independent loop equations is (a) 3 (b) 1 (c) 4 (d) 2
10. At any junction, the sum of currents entering equals (a) zero, whatever leaves (b) twice the current leaving (c) the sum of currents leaving (d) the product of currents leaving
Level 2: NEET standard
11. A 12 V and a 4 V cell are in one loop with their + terminals facing each other. Total loop resistance is 4 Ω. The current is (a) 2 A (b) 4 A (c) 1 A (d) 3 A
12. The same two cells as in Q11 are turned to aid each other, with the same 4 Ω. The current is (a) 2 A (b) 3 A (c) 4 A (d) 8 A
13. Between junctions P and Q are three branches: a 10 V cell with 2 Ω, a plain 2 Ω, and an 8 V cell with 2 Ω. Both cells have + towards P. The current in the plain 2 Ω is (a) 2 A (b) 3 A (c) 4.5 A (d) 9 A
14. In the circuit of Q13, the potential of P relative to Q is (a) 9 V (b) 10 V (c) 8 V (d) 6 V
15. In the circuit of Q13, the current through the 8 V cell is (a) 1 A (b) 2 A (c) 3 A (d) zero
16. A 6 V cell and a 3 V cell, each with r = 1 Ω, are joined in parallel (like terminals together) across a 2 Ω load. The load current is (a) 4.5 A (b) 1.8 A (c) 3.6 A (d) 2.25 A
17. Between junctions P and Q are three branches: a 12 V cell with 2 Ω, a 3 V cell with 3 Ω, and a plain 3 Ω. Both cells have + towards P. The 3 V cell (a) gives out 1 A (b) is charged by 3 A (c) is charged by 1 A (d) carries no current
18. A 6 V ideal cell drives 1 Ω and 2 Ω in series. The potential drop across the 2 Ω resistor is (a) 2 V (b) 3 V (c) 6 V (d) 4 V
19. A branch goes from A through 2 Ω and then a 5 V cell to B; the cell's + terminal faces A. A current of 1 A flows from A to B. V_A − V_B is (a) 7 V (b) 3 V (c) −3 V (d) −7 V
20. In Q19 the cell is turned round, so its − terminal faces A, with the same 1 A from A to B. V_A − V_B is (a) 7 V (b) 3 V (c) −3 V (d) −7 V
21. Two identical cells (E, r) are joined in a loop, + of one to − of the other, with nothing else. The current is (a) zero (b) E/r (c) 2E/r (d) E/(2r)
22. Two identical cells (E, r) are joined in parallel, like terminals together, with no load. The current through each is (a) E/r (b) 2E/r (c) E/(2r) (d) zero
Level 3: Challenge
23. Between junctions P and Q are three branches: a 6 V cell with 2 Ω, a 4 V cell with 4 Ω, and a plain 4 Ω. Both cells have + towards P. The current through the 4 V cell is (a) 1 A (b) 0.5 A (c) zero (d) 2 A
24. In the circuit of Q23, the current in the plain 4 Ω is (a) 1 A (b) 2 A (c) 0.5 A (d) 1.5 A
25. A 6 V cell and a 2 V cell, each of internal resistance 1 Ω, are in one loop with a 2 Ω resistor and their + terminals facing each other. The terminal voltage of the 2 V cell is (a) 1 V (b) 2 V (c) 4 V (d) 3 V
26. Between junctions P and Q are three branches: a 4 V cell with 1 Ω, a 2 V cell with 1 Ω, and a plain 2 Ω. Both cells have + towards P. The current in the plain 2 Ω is (a) 2 A (b) 1.2 A (c) 0.4 A (d) 2.4 A
27. A 9 V battery of internal resistance 1 Ω drives two 4 Ω resistors in series. The point between them is earthed. The potential of the + terminal is (a) +4 V (b) +9 V (c) +4.5 V (d) −4 V
28. A network has 5 branches and 3 junctions. The number of independent loop equations is (a) 2 (b) 5 (c) 3 (d) 4
29. Assertion (A): The junction rule holds at every junction of a circuit carrying steady currents. Reason (R): The loop rule is a statement of conservation of energy. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: When applying Kirchhoff's laws, the assumed current directions must be the true directions, or the answers come out wrong. Statement II: A cell absorbs energy when current enters it at its + terminal. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | d | Charge does not pile up |
| 2 | b | Potential is single-valued |
| 3 | c | Current flows from high to low potential |
| 4 | a | − to + is a rise |
| 5 | c | 10 in, 3 out, so 7 out |
| 6 | d | Size right, direction opposite |
| 7 | a | Loop rule |
| 8 | b | Rules are general |
| 9 | d | b − j + 1 = 2 |
| 10 | c | Junction rule |
| 11 | a | (12 − 4)/4 |
| 12 | c | (12 + 4)/4 |
| 13 | b | V = 9/1.5 = 6 V, 6/2 |
| 14 | d | Node method |
| 15 | a | (8 − 6)/2 |
| 16 | b | V = 3.6 V, 3.6/2 |
| 17 | c | V = 6 V, (6 − 3)/3 into + terminal |
| 18 | d | I = 2 A, 2 × 2 |
| 19 | a | −2 then −5 from A to B |
| 20 | c | −2 then +5 from A to B |
| 21 | b | 2E/(2r) |
| 22 | d | Equal emfs balance |
| 23 | c | V = 4/1 = 4 V equals that cell's emf |
| 24 | a | 4/4 |
| 25 | d | I = 4/4 = 1 A, charging: 2 + 1 |
| 26 | b | V = 6/2.5 = 2.4 V, 2.4/2 |
| 27 | a | 1 A through 4 Ω to earth |
| 28 | c | 5 − 3 + 1 |
| 29 | b | Both true; R is about loops, A about junctions |
| 30 | d | Signs fix themselves; charging absorbs energy |
Chapter 7 revision sheet
One-page summary
Junction rule (KCL): the total current entering a junction equals the total current leaving. It comes from conservation of charge.
Loop rule (KVL): the algebraic sum of potential changes round any closed loop is zero. It comes from conservation of energy (the electrostatic field is conservative).
Sign rules while walking round a loop: through a resistor along the current, −IR; against the current, +IR.
Through a cell from − to +, +E; from + to −, −E (whatever the current direction).
Current directions can be guessed. A negative answer only means the real current flows the other way.
Node method: choose one node as 0 V, write KCL at the other nodes with branch currents (V_a − V_b)/R.
Branch with a cell: current from node X to Y through E and R is (V_X − V_Y + E)/R when E pushes from X towards Y.
Single loop with cells in opposition: I = (E_1 − E_2)/(total R); the larger cell discharges and the smaller one is charged.
Potential difference between two points: add the changes along any one path between them.
For a circuit with b branches and n junctions, you need (n − 1) junction equations and b − (n − 1) loop equations.
Terminal voltage of a cell being charged = E + Ir; of a cell discharging = E − Ir.
Kirchhoff's laws work for any circuit, including those that cannot be reduced to series and parallel.
Must-remember table
| Step along the loop | Potential change |
|---|---|
| Resistor, moving with the current | −IR |
| Resistor, moving against the current | +IR |
| Cell, − terminal to + terminal | +E |
| Cell, + terminal to − terminal | −E |
| Plain connecting wire | 0 |
| Whole closed loop | 0 in total |
Memory aids
"C for Current, C for Charge": the current (junction) law comes from charge conservation.
"V for Voltage, E for Energy": the voltage (loop) law comes from energy conservation.
"Downhill with the flow": walking with the current through a resistor, the potential drops (−IR).
"Minus to plus, climb up": going through a cell from − to +, the potential rises by E.
Concept connections
KVL works because the electrostatic field is conservative, as shown in Physics Book 11: Electrostatics.
Conservation of energy behind the loop law was built in Physics Book 4: Work, Energy and Power.
The same loop analysis is used for LR and LC circuits in Physics Book 14: Electromagnetic Induction and Alternating Currents.
Practice MCQs: Chapter 7, Level 4 (new NEET pattern)
31. Match List I with List II.
List I: A. Kirchhoff's junction rule; B. Kirchhoff's loop rule; C. Crossing a resistor in the direction of current; D. Crossing a cell from its − to its + terminal
List II: (i) +E; (ii) conservation of energy; (iii) −IR; (iv) conservation of charge
(a) A-ii, B-iv, C-iii, D-i (b) A-iv, B-ii, C-iii, D-i (c) A-iv, B-ii, C-i, D-iii (d) A-iii, B-ii, C-iv, D-i
32. Match each junction in List I with the unknown current x in List II.
List I: A. 4 A and 3 A enter; 2 A and x leave; B. 6 A enters; 2 A, 1 A and x leave; C. 2 A enters; 5 A and x leave; D. 7 A enters; two equal currents x leave
List II: (i) 3.5 A; (ii) 3 A, actually entering the junction; (iii) 5 A; (iv) 3 A leaving
(a) A-iii, B-ii, C-iv, D-i (b) A-i, B-iv, C-ii, D-iii (c) A-iv, B-iii, C-ii, D-i (d) A-iii, B-iv, C-ii, D-i
33. A single loop has ideal cells of 12 V and 6 V and a total resistance of 3 Ω. Match List I with List II.
List I: A. Current with the cells aiding; B. Current with the cells opposing; C. Power given out by the 12 V cell when opposing; D. Power taken in by the 6 V cell when opposing
List II: (i) 2 A; (ii) 12 W; (iii) 6 A; (iv) 24 W
(a) A-iii, B-i, C-iv, D-ii (b) A-i, B-iii, C-iv, D-ii (c) A-iii, B-i, C-ii, D-iv (d) A-iv, B-i, C-iii, D-ii
34. Match List I with List II.
List I: A. Algebraic sum of currents at a junction; B. Algebraic sum of potential changes round a closed loop; C. A current comes out negative in the solution; D. Number of independent loop equations for a circuit with 2 junctions and 3 branches
List II: (i) the actual direction is opposite to the one assumed; (ii) 2; (iii) zero, because charge does not pile up; (iv) zero, because the electrostatic field is conservative
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-iv, C-ii, D-i (c) A-iii, B-iv, C-i, D-ii (d) A-i, B-iv, C-iii, D-ii
35. How many of the following statements are correct?
A. The junction rule follows from conservation of charge.
B. The loop rule follows from conservation of energy.
C. The direction chosen for each branch current can be arbitrary.
D. The junction rule holds only at junctions of exactly three wires.
E. A negative current in the answer means a mistake was made.
(a) 3 (b) 2 (c) 4 (d) 5
36. Points X and Y are joined by three branches: a 6 V ideal cell with 1 Ω, a 3 V ideal cell with 2 Ω (both with + towards X), and a 2 Ω load. Choose the correct set of statements.
A. The potential difference across the load is 3.75 V.
B. The 3 V cell is being charged.
C. The current through the 6 V cell is 2.25 A.
D. The load current is 2.25 A.
(a) A and D only (b) A, B and C only (c) B and D only (d) A, B, C and D
37. Choose the correct set of statements about applying the loop rule.
A. Crossing a resistor against the current gives +IR.
B. Crossing a cell from + to − gives −E.
C. The rule holds for any closed path, even one across an open gap, if the gap's voltage is included.
D. The rule fails if the loop contains more than one cell.
(a) A only (b) A and D only (c) B and D only (d) A, B and C only
38. Points X and Y are joined by three branches: a 10 V ideal cell with 2 Ω, a 4 V ideal cell with 4 Ω (both with + towards X), and a 4 Ω resistor. How many statements are correct?
A. V_X − V_Y = 6 V.
B. The current through the 4 Ω resistor branch is 1.5 A.
C. The 4 V cell delivers power to the circuit.
D. The current through the 10 V cell is 2 A.
(a) 1 (b) 2 (c) 3 (d) 4
39. A current of 2 A flows from A to B through, in order, a 3 Ω resistor, a 6 V cell whose negative terminal faces A, and a 2 Ω resistor. V_A − V_B is
(a) 16 V (b) 4 V (c) −4 V (d) 10 V
40. Ammeters on four wires meeting at a node read as follows. The current in wire 4 is
| Wire | Current | Direction |
|---|---|---|
| 1 | 3.0 A | towards node |
| 2 | 1.5 A | away from node |
| 3 | 2.5 A | towards node |
| 4 | ? | ? |
(a) 4.0 A away from the node (b) 4.0 A towards the node (c) 7.0 A away from the node (d) 1.0 A towards the node
41. A potential–distance graph is drawn while going once clockwise round a single loop from point P. The potential jumps up by 12 V across the cell, falls steadily by 8 V across R_1 = 4 Ω, and then falls steadily by 4 V across R_2. The current and R_2 are
(a) 2 A, 4 Ω (b) 3 A, 2 Ω (c) 1 A, 4 Ω (d) 2 A, 2 Ω
Passage for Q42–Q43: On a rooftop, a solar panel (treat it as an 18 V source with 2 Ω internal resistance) charges a 12 V battery (internal resistance 1 Ω). A 6 Ω LED lamp is connected across the battery terminals at the same time. All three are in parallel between the same two points.
42. The potential difference across the lamp is
(a) 12.6 V (b) 12.0 V (c) 13.2 V (d) 15.0 V
43. The charging current into the battery is
(a) 2.1 A (b) 0.6 A (c) 2.7 A (d) 1.2 A
44. Points X and Y are joined by three branches: a 12 V ideal cell with 2 Ω, a 6 Ω resistor, and a 6 V ideal cell with 3 Ω (both cells with + towards X). The current through the 6 Ω resistor is
(a) 2 A (b) 2/3 A (c) 1 A (d) 4/3 A
45. Cells of 8 V (r = 1 Ω) and 4 V (r = 1 Ω) are in a single loop in opposition with a 2 Ω resistor. The terminal voltages of the 8 V and 4 V cells are
(a) 7 V and 3 V (b) 8 V and 4 V (c) 7 V and 5 V (d) 9 V and 5 V
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | b | KCL from charge, KVL from energy; −IR along current; +E from − to + |
| 32 | d | x = 7 − 2 = 5 A; 6 − 3 = 3 A out; 2 − 5 = −3 A, so 3 A in; 7/2 = 3.5 A |
| 33 | a | 18/3 = 6 A; 6/3 = 2 A; 12 × 2 = 24 W; 6 × 2 = 12 W |
| 34 | c | b − (n − 1) = 3 − 1 = 2 loop equations |
| 35 | a | A, B, C are correct; KCL holds at any junction and a negative sign only reverses direction |
| 36 | b | (6 − V)/1 + (3 − V)/2 = V/2 gives V = 3.75 V; 6 V cell gives 2.25 A, 0.375 A flows into the 3 V cell, load takes 1.875 A |
| 37 | d | The loop rule holds for any number of cells |
| 38 | c | (10 − V)/2 + (4 − V)/4 = V/4 gives V = 6 V; 2 A, 1.5 A and 0.5 A into the 4 V cell, so C is wrong |
| 39 | b | V_B = V_A − 6 + 6 − 4, so V_A − V_B = 4 V |
| 40 | a | In: 3.0 + 2.5 = 5.5 A; out: 1.5 A + x, so x = 4.0 A away |
| 41 | d | I = 8/4 = 2 A; R_2 = 4/2 = 2 Ω; rises and falls total zero |
| 42 | a | (18 − V)/2 = (V − 12)/1 + V/6 gives 10V = 126, V = 12.6 V |
| 43 | b | (12.6 − 12)/1 = 0.6 A |
| 44 | d | (12 − V)/2 + (6 − V)/3 = V/6 gives V = 8 V, so I = 8/6 = 4/3 A |
| 45 | c | I = 4/4 = 1 A; 8 V cell discharges: 8 − 1 = 7 V; 4 V cell charges: 4 + 1 = 5 V |