Chapter 4: Combinations of Resistors
Almost every circuit question starts by collapsing a network into one equivalent resistance. Series adds resistances; parallel adds conductances.
What you will learn
Derive the series and parallel formulas from charge and energy conservation.
Use voltage dividers and current dividers in one step.
Reduce mixed networks, spot shorted resistors and equipotential points.
Use symmetry for rings, triangles and the cube.
Solve infinite ladders at NEET level.
4.1 Resistors in series
Resistors are in series when they lie one after another with no branch between them. The same current I flows through each, because charge cannot pile up anywhere.
The potential drops add up to the applied voltage:
So the equivalent resistance is:
The voltage splits in the ratio of the resistances. For two resistors across V, this is the voltage divider:
The largest resistor takes the largest share of the voltage. The series value is always more than the largest single resistor.
4.2 Resistors in parallel
Resistors are in parallel when each is connected between the same two points. They all share the same voltage V. The main current splits among them and the parts add up:
So:
For two resistors, use product over sum. For n equal resistors R, R_p = R/n.
The current divider has the other resistor on top. The smaller resistor carries the larger current. The parallel value is always less than the smallest single resistor.

In the chain one current passes every resistor and the voltages add; in the bank every resistor sees the same voltage and the currents add.
| Feature | Series | Parallel |
|---|---|---|
| Same for every resistor | Current | Voltage |
| What adds up | Voltages and resistances | Currents and conductances |
| Equivalent value | More than the largest | Less than the smallest |
| Larger share goes to | Larger R (more voltage) | Smaller R (more current) |
| One element breaks | Whole chain stops | Others keep working |
| Everyday use | Old festival light strings | House wiring |
This is why a house is wired in parallel. Each fan, bulb and fridge gets the full 220 V and can be switched alone.
For n equal resistors R, the series value is nR and the parallel value is R/n. Their ratio is n².
4.3 Reducing mixed networks
Work from the far end of the network towards the terminals. At each step, find a pair that is clearly in series or in parallel and replace it with one resistor. Redraw if needed.
Three checks save time:
A plain wire joining two points makes them one point. Any resistor between those two points carries no current. It is shorted out.
A resistor with one end left free (dangling) carries no current. Ignore it.
Points at the same potential can be joined or separated without changing anything.
An ideal voltmeter connected across a resistor draws no current. A real voltmeter has finite resistance and acts as a resistor in parallel, which lowers the reading.
4.4 Using symmetry
When a network looks the same from both terminals, equal currents flow in matching branches. Points placed alike are at the same potential.
Ring of wire: a uniform wire of resistance R bent into a circle. Two points split it into arcs of resistance R₁ and R₂ with R₁ + R₂ = R. The arcs are in parallel. Across a diameter the result is R/4. For an arc of angle θ:
Cube of 12 equal resistors R: send current I in at one corner and take it out at the opposite corner. By symmetry it splits I/3 into three edges, then I/6 into six edges, then I/3 into the last three edges. Along any path:
| Cube, 12 edges each R | Equivalent resistance |
|---|---|
| Across a body diagonal | 5R/6 |
| Across a face diagonal | 3R/4 |
| Across one edge | 7R/12 |
4.5 Infinite ladder
Take an endless ladder: a series resistor R₁, then a shunt R₂ across, repeated forever. Removing the first section leaves the same endless ladder. So if the whole ladder is x, the rest is also x:
Take the positive root. When R₁ = R₂ = R:
4.6 Cut and rejoin
A wire of resistance R cut into n equal pieces gives pieces of R/n. Join all the pieces in parallel and you get R/n².
With k identical resistors you can make several values. With three equal resistors R you can make 3R, R/3, 3R/2 and 2R/3. Value R itself is not possible using all three.
Worked example 4.1: Resistors of 2 Ω, 3 Ω and 5 Ω are in series across 20 V. Find the current and the voltage across each.
Solution: R = 10 Ω, so I = 2 A. The drops are 4 V, 6 V and 10 V, adding to 20 V.
Worked example 4.2: 3 Ω and 6 Ω are in parallel across 12 V. Find the total current and the current in each.
Solution: R_p = 18/9 = 2 Ω, so I = 6 A. I₃ = 12/3 = 4 A and I₆ = 12/6 = 2 A. The smaller resistor carries more.
Worked example 4.3: A 4 Ω resistor is in series with a parallel pair of 6 Ω and 12 Ω. The network is across 16 V. Find all currents.
Solution: 6 parallel 12 = 72/18 = 4 Ω. Total = 8 Ω, so I = 2 A. Voltage across the pair = 2 × 4 = 8 V. Then I₆ = 8/6 = 4/3 A and I₁₂ = 8/12 = 2/3 A.
Worked example 4.4: A uniform 16 Ω wire is bent into a ring. Find the resistance between two points that are (i) diametrically opposite, (ii) a quarter circle apart.
Solution: (i) Two 8 Ω arcs in parallel give 4 Ω. (ii) Arcs of 4 Ω and 12 Ω give 48/16 = 3 Ω.
Worked example 4.5: In a triangle ABC, each side is a 6 Ω resistor. A plain wire also joins C to B. Find the resistance between A and B.
Solution: The wire makes C and B one point. The resistor CB is shorted and carries no current. AC and AB now both join A to B, so they are in parallel: 3 Ω.
Worked example 4.6: Using all three of three 6 Ω resistors, list every value you can make.
Solution: All in series: 18 Ω. All in parallel: 2 Ω. One in series with a parallel pair: 6 + 3 = 9 Ω. One in parallel with a series pair: (6 × 12)/18 = 4 Ω.
Worked example 4.7: Twelve 6 Ω resistors form the edges of a cube. Find the resistance across a body diagonal.
Solution: R = 5R/6 = 5 × 6/6 = 5 Ω.
Worked example 4.8: Find the input resistance of an infinite ladder with series arms of 2 Ω and shunt arms of 4 Ω.
Solution: x² − 2x − 8 = 0, so (x − 4)(x + 2) = 0. Taking the positive root, x = 4 Ω.
Worked example 4.9: Two 10 kΩ resistors in series are across 10 V. A voltmeter of resistance 10 kΩ is placed across one of them. What does it read?
Solution: The voltmeter and that resistor make 5 kΩ. The other resistor is 10 kΩ. The meter reads 10 × 5/15 ≈ 3.33 V, not the 5 V an ideal meter would show.
Quick revision
Series: same I, R_s = R₁ + R₂ + …, V splits in ratio of R.
Parallel: same V, 1/R_p = 1/R₁ + 1/R₂ + …, I splits inversely to R.
Two in parallel: R₁R₂/(R₁ + R₂). n equal: R/n.
A wire across a resistor shorts it out.
Ring across a diameter: R/4. Cube: 5R/6, 3R/4, 7R/12.
Infinite ladder: x² − R₁x − R₁R₂ = 0.
Cut into n and joined in parallel: R/n².
NEET traps
Thinking two resistors are in parallel because they look side by side on paper. Check that both ends share the same two nodes.
Missing a shorted resistor bypassed by a plain wire.
In the current divider, putting the same resistor on top. The other one goes on top.
Taking the negative root of the ladder equation.
Forgetting the full ring resistance R is shared between the two arcs, not given to each.
Treating a real voltmeter as ideal when its resistance is given.
Practice MCQs: Chapter 4
Level 1: Concept check
1. For resistors in series, the quantity that is the same for each is (a) current (b) voltage (c) power (d) none of these
2. The equivalent of 2 Ω, 4 Ω and 6 Ω in series is (a) 1.09 Ω (b) 6 Ω (c) 12 Ω (d) 48 Ω
3. The equivalent of 6 Ω and 3 Ω in parallel is (a) 9 Ω (b) 2 Ω (c) 4.5 Ω (d) 18 Ω
4. n equal resistors R in parallel give (a) nR (b) n²R (c) R/n² (d) R/n
5. Appliances in a house are connected in (a) series (b) parallel (c) either, it makes no difference (d) one long series chain per room
6. The equivalent resistance of a parallel group is (a) less than the smallest resistor (b) more than the largest resistor (c) between the smallest and largest (d) equal to the largest
7. Five 10 Ω resistors are connected first all in series, then all in parallel. The ratio of the two equivalents is (a) 5 (b) 10 (c) 50 (d) 25
8. Three 4 Ω resistors in parallel give (a) 12 Ω (b) 4 Ω (c) 4/3 Ω (d) 3/4 Ω
9. In a parallel combination, the current divides (a) inversely as the resistances (b) directly as the resistances (c) equally, always (d) as the squares of the resistances
10. 10 Ω and 15 Ω in series are across 50 V. The voltage across the 10 Ω resistor is (a) 30 V (b) 20 V (c) 25 V (d) 10 V
Level 2: NEET standard
11. A 3 Ω resistor is in series with a parallel pair of 4 Ω and 12 Ω. The equivalent is (a) 19 Ω (b) 4 Ω (c) 6 Ω (d) 9 Ω
12. Using all three of three 6 Ω resistors, which value can NOT be made? (a) 6 Ω (b) 9 Ω (c) 4 Ω (d) 2 Ω
13. A uniform 20 Ω wire is bent into a ring. The resistance between diametrically opposite points is (a) 10 Ω (b) 20 Ω (c) 2.5 Ω (d) 5 Ω
14. A uniform 24 Ω wire is bent into a ring. The resistance between two points 60° apart (at the centre) is (a) 4 Ω (b) 10/3 Ω (c) 20 Ω (d) 6 Ω
15. A total current of 18 A enters a parallel pair of 3 Ω and 6 Ω. The current in the 6 Ω resistor is (a) 12 A (b) 9 A (c) 6 A (d) 3 A
16. A 12 V supply is across a 2 Ω resistor in series with a parallel pair of 6 Ω and 3 Ω. The current in the 6 Ω resistor is (a) 3 A (b) 2 A (c) 0.5 A (d) 1 A
17. A 50 Ω wire is cut into five equal parts and the parts are joined in parallel. The equivalent is (a) 2 Ω (b) 10 Ω (c) 0.4 Ω (d) 250 Ω
18. In triangle ABC, each side is 9 Ω and a plain wire joins C to B. The resistance between A and B is (a) 9 Ω (b) 4.5 Ω (c) 3 Ω (d) 6 Ω
19. Two 20 kΩ resistors in series are across 12 V. A 20 kΩ voltmeter is placed across one of them. It reads (a) 6 V (b) 8 V (c) 3 V (d) 4 V
20. n identical resistors give 100 Ω in series and 1 Ω in parallel. Each resistor is (a) 1 Ω (b) 100 Ω (c) 10 Ω (d) 50 Ω
21. Four resistors R form a square. The resistance across one side is (a) 3R/4 (b) R/4 (c) R (d) 4R/3
22. Four resistors R form a square. The resistance between opposite corners is (a) 2R (b) R (c) R/2 (d) 4R
Level 3: Challenge
23. Twelve 6 Ω resistors form a cube. The resistance across a body diagonal is (a) 6 Ω (b) 3 Ω (c) 5 Ω (d) 7.5 Ω
24. An infinite ladder has every series arm and every shunt arm equal to 1 Ω. Its input resistance is about (a) 2 Ω (b) 1 Ω (c) 2.24 Ω (d) 1.62 Ω
25. Twelve 12 Ω resistors form a cube. The resistance between the two ends of one edge is (a) 7 Ω (b) 10 Ω (c) 9 Ω (d) 5 Ω
26. Twelve 4 Ω resistors form a cube. The resistance across a face diagonal is (a) 4 Ω (b) 3 Ω (c) 5 Ω (d) 2.5 Ω
27. An infinite ladder has series arms of 2 Ω and shunt arms of 4 Ω. Its input resistance is (a) 6 Ω (b) 8 Ω (c) 4 Ω (d) 2 Ω
28. A uniform 12 Ω wire is bent into an equilateral triangle. The resistance between two corners is (a) 4 Ω (b) 8 Ω (c) 12 Ω (d) 8/3 Ω
29. Assertion (A): The lights and fans in a house are connected in parallel. Reason (R): The equivalent resistance of a parallel group is less than each resistance in it. (a) Both true, R explains A (b) Both true, R does not explain A (c) A true, R false (d) A false, R true
30. Statement I: Adding one more resistor in parallel to a network always lowers its equivalent resistance. Statement II: Adding one more resistor in series to a network always raises its equivalent resistance. (a) Both true (b) Both false (c) I true, II false (d) I false, II true
Answer key with reasons
| Q | Ans | Reason |
|---|---|---|
| 1 | a | No branch, so no change in I |
| 2 | c | 2 + 4 + 6 |
| 3 | b | 18/9 |
| 4 | d | 1/R_p = n/R |
| 5 | b | Full voltage and separate switching |
| 6 | a | Conductances add |
| 7 | d | Ratio = n² = 25 |
| 8 | c | 4/3 Ω |
| 9 | a | I = V/R with same V |
| 10 | b | I = 2 A, 2 × 10 |
| 11 | c | 4 parallel 12 = 3, plus 3 |
| 12 | a | Possible: 18, 2, 9, 4 |
| 13 | d | 10 parallel 10 |
| 14 | b | Arcs 4 and 20: 80/24 |
| 15 | c | 18 × 3/9 |
| 16 | d | Total 4 Ω, I = 3 A, 6 V on pair, 6/6 |
| 17 | a | R/n² = 50/25 |
| 18 | b | CB shorted; 9 parallel 9 |
| 19 | d | 10 kΩ with 20 kΩ: 12 × 10/30 |
| 20 | c | n² = 100, n = 10, R = 10 Ω |
| 21 | a | R parallel 3R |
| 22 | b | 2R parallel 2R |
| 23 | c | 5R/6 = 5 Ω |
| 24 | d | (1 + √5)/2 |
| 25 | a | 7R/12 = 7 Ω |
| 26 | b | 3R/4 = 3 Ω |
| 27 | c | x² − 2x − 8 = 0 |
| 28 | d | 4 parallel 8 = 32/12 |
| 29 | b | Real reason: same voltage, independent switching |
| 30 | a | Parallel adds conductance; series adds resistance |
Chapter 4 revision sheet
One-page summary
Series: same current through each resistor; R_s = R_1 + R_2 + …; voltage divides in proportion to R.
Parallel: same voltage across each; 1/R_p = 1/R_1 + 1/R_2 + …; current divides in inverse proportion to R.
Two in parallel: R_p = R_1R_2/(R_1 + R_2). Current divider: I_1 = I·R_2/(R_1 + R_2).
n equal resistors R: series nR, parallel R/n, ratio series : parallel = n².
R_s is always more than the largest resistor; R_p is always less than the smallest.
Adding a resistor in parallel always lowers the total; adding one in series always raises it.
Household appliances are in parallel: each gets full mains voltage, and total current grows as more are switched on.
Symmetry: points at the same potential can be joined or separated without changing anything.
Ring of total resistance R_0 cut into fractions x and (1 − x): R = R_0·x(1 − x); diametric points give R_0/4.
Triangle of three equal resistors R: between any two corners, 2R/3.
Cube of twelve equal resistors r: body diagonal 5r/6, face diagonal 3r/4, one edge 7r/12.
Infinite ladder: set R_eq = series arm + (shunt ∥ R_eq) and solve the quadratic.
Minimum number of equal resistors for a target value: try series–parallel mixes such as R + R/2 = 3R/2.
Must-remember table
| Network | Equivalent resistance |
|---|---|
| n equal R in series | nR |
| n equal R in parallel | R/n |
| Two in parallel | R_1R_2/(R_1 + R_2) |
| Ring R_0, diametric points | R_0/4 |
| Triangle of R, two corners | 2R/3 |
| Regular hexagon of R, opposite corners | 3R/2 |
| Cube, body diagonal | 5r/6 |
| Cube, face diagonal | 3r/4 |
| Cube, one edge | 7r/12 |
| Infinite ladder, both arms R | R(1 + √5)/2 |
Memory aids
"Series Shares Same current, Parallel Patches Potential": series keeps I the same, parallel keeps V the same.
"Product over Sum": two resistors in parallel, R_1R_2/(R_1 + R_2).
"Cube 5-3-7 over 6-4-12": body diagonal 5/6, face diagonal 3/4, edge 7/12 (times r).
"Small path, big current": in parallel, the smallest resistor takes the largest share of current.
Concept connections
Capacitors combine the opposite way (parallel adds directly), see Physics Book 11: Electrostatics.
Equivalent resistance is the first step in every Kirchhoff and bridge problem in Chapters 7 and 8 of this book.
Series–parallel combinations of springs show a similar pattern in Physics Book 10: Oscillations and Waves.
Practice MCQs: Chapter 4, Level 4 (new NEET pattern)
31. All resistors are identical, each of value R. Match the network in List I with its equivalent resistance in List II.
List I: A. Four in series; B. Four in parallel; C. Two in series, and this pair in parallel with another such pair; D. Twelve on the edges of a cube, measured across a body diagonal
List II: (i) R; (ii) 5R/6; (iii) R/4; (iv) 4R
(a) A-iii, B-iv, C-i, D-ii (b) A-iv, B-iii, C-ii, D-i (c) A-iv, B-iii, C-i, D-ii (d) A-iv, B-i, C-iii, D-ii
32. A uniform wire ring has total resistance 16 Ω. Match the angle between the two terminal points (List I) with the resistance between them (List II).
List I: A. 180°; B. 90°; C. 120°; D. 60°
List II: (i) 32/9 Ω; (ii) 20/9 Ω; (iii) 4 Ω; (iv) 3 Ω
(a) A-iv, B-iii, C-i, D-ii (b) A-iii, B-i, C-iv, D-ii (c) A-iii, B-iv, C-ii, D-i (d) A-iii, B-iv, C-i, D-ii
33. A 2 Ω and a 4 Ω resistor are used with an ideal 12 V battery. Match List I with List II.
List I: A. Current when they are in series; B. Voltage across 4 Ω in series; C. Total current when they are in parallel; D. Current through 4 Ω in parallel
List II: (i) 9 A; (ii) 8 V; (iii) 3 A; (iv) 2 A
(a) A-iv, B-ii, C-i, D-iii (b) A-iii, B-ii, C-i, D-iv (c) A-iv, B-i, C-ii, D-iii (d) A-ii, B-iv, C-i, D-iii
34. Match the network in List I with its equivalent resistance in List II (each resistor r).
List I: A. Cube, across a body diagonal; B. Cube, across a face diagonal; C. Cube, across one edge; D. Infinite ladder with every series and shunt arm equal to r
List II: (i) 3r/4; (ii) 5r/6; (iii) (1 + √5)r/2; (iv) 7r/12
(a) A-i, B-ii, C-iv, D-iii (b) A-ii, B-iv, C-i, D-iii (c) A-ii, B-i, C-iv, D-iii (d) A-iii, B-i, C-iv, D-ii
35. How many of the following statements are correct?
A. In series, the current is the same through each resistor.
B. In parallel, the equivalent resistance is less than the smallest resistor.
C. Adding one more resistor in parallel always decreases the total resistance.
D. In series, the largest resistor has the largest voltage across it.
E. In parallel, the largest resistor carries the largest current.
(a) 4 (b) 5 (c) 3 (d) 2
36. Choose the correct set of statements about household wiring.
A. Appliances are connected in parallel so that each gets the full mains voltage.
B. Switching off one appliance does not switch off the others.
C. The total resistance of the house circuit increases as more appliances are switched on.
D. The total current drawn from the mains increases as more appliances are switched on.
(a) A and B only (b) A, C and D only (c) B and C only (d) A, B and D only
37. Choose the correct set of statements for n identical resistors, each R.
A. R_series/R_parallel = n².
B. If n = 5 and R = 10 Ω, R_parallel = 2 Ω.
C. R_series/R_parallel = n.
D. In parallel, each resistor carries 1/n of the total current.
(a) A and B only (b) A, B and D only (c) B, C and D only (d) C and D only
38. A 6 Ω resistor is in series with a parallel pair of 3 Ω and 6 Ω, across an ideal 12 V battery. How many statements are correct?
A. The total resistance is 8 Ω.
B. The battery current is 1.5 A.
C. The current through the 3 Ω resistor is 0.5 A.
D. The voltage across the series 6 Ω resistor is 9 V.
(a) 2 (b) 3 (c) 4 (d) 1
39. On a V-I graph (V on the y-axis), line P passes through (2 A, 8 V) and line Q through (2 A, 4 V); both pass through the origin. The slopes of the V-I lines for P and Q in series and for P and Q in parallel are
(a) 6 Ω and 2 Ω (b) 3 Ω and 4/3 Ω (c) 8 Ω and 4/3 Ω (d) 6 Ω and 4/3 Ω
40. Three resistors are connected in parallel across an ideal 6 V battery. The ammeter readings are shown. The equivalent resistance is
| Resistor | Current (A) |
|---|---|
| R_1 | 2.0 |
| R_2 | 1.0 |
| R_3 | 0.5 |
(a) 7/12 Ω (b) 21 Ω (c) 12/7 Ω (d) 3.5 Ω
41. Three 6 Ω resistors form a triangle ABC. The resistance between A and B is
(a) 4 Ω (b) 18 Ω (c) 2 Ω (d) 9 Ω
Passage for Q42–Q43: A Diwali light string has 20 identical bulbs in series on a 220 V supply. Treat each bulb as a fixed 22 Ω resistor.
42. The current in the string is
(a) 10 A (b) 0.25 A (c) 1 A (d) 0.5 A
43. One bulb burns out. A student removes it and joins its two socket wires together, so 19 bulbs remain in series. The new current is about
(a) 0.48 A (b) 0.50 A (c) 0.53 A (d) 0 A
44. The minimum number of 6 Ω resistors needed to make an equivalent resistance of 9 Ω is
(a) 2 (b) 3 (c) 4 (d) 5
45. An infinite ladder has every series arm equal to 1 Ω and every shunt arm equal to 2 Ω. The resistance at its input is
(a) 1 Ω (b) 3 Ω (c) 2 Ω (d) √3 Ω
Level 4 answer key
| Q | Ans | Reason |
|---|---|---|
| 31 | c | 4R, R/4, 2R ∥ 2R = R, cube body diagonal 5R/6 |
| 32 | d | R = 16x(1 − x): 4, 3, 32/9, 20/9 Ω |
| 33 | a | 12/6 = 2 A; 2 × 4 = 8 V; 6 + 3 = 9 A; 12/4 = 3 A |
| 34 | c | Standard cube results; ladder R = r + rR/(r + R) gives (1 + √5)r/2 |
| 35 | a | A to D are correct; in parallel the smallest resistor carries the most current |
| 36 | d | More parallel paths lower the total resistance and raise the current |
| 37 | b | nR/(R/n) = n², so C is wrong |
| 38 | b | 3 ∥ 6 = 2 Ω, total 8 Ω, I = 1.5 A, 9 V on 6 Ω, 3 V on the pair, so 3 Ω carries 1 A |
| 39 | d | R_P = 4 Ω, R_Q = 2 Ω; series 6 Ω, parallel 8/6 = 4/3 Ω |
| 40 | c | Total current 3.5 A, so R = 6/3.5 = 12/7 Ω |
| 41 | a | 6 Ω directly in parallel with 12 Ω via C: 72/18 = 4 Ω |
| 42 | d | 220/(20 × 22) = 0.5 A |
| 43 | c | 220/(19 × 22) = 0.526 A, slightly higher |
| 44 | b | 6 + (6 ∥ 6) = 6 + 3 = 9 Ω uses three; two give only 12 or 3 Ω |
| 45 | c | R = 1 + 2R/(2 + R) gives R² − R − 2 = 0, so R = 2 Ω |