LATEST
NEETBy Pareeksha Editorial Team· ⏱ 8 min read

Electromagnetic Induction NEET PYQs: Solved Questions

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Electromagnetic Induction NEET PYQs: Solved Questions
On this page
  1. How often Electromagnetic Induction is asked in NEET
  2. What the questions test
  3. Solved NEET past questions
  4. Q1. NEET 2026 re-exam, Question 5
  5. Q2. NEET 2024, Question 49
  6. Q3. NEET 2023, Question 4
  7. Q4. NEET 2022 (second paper), Question 175
  8. Q5. NEET 2022, Question 147
  9. Key formulas and facts
  10. Common traps
  11. How to study Electromagnetic Induction for NEET
  12. Frequently asked questions
  13. How many questions come from Electromagnetic Induction in NEET?
  14. Is EMI a hard chapter for NEET?
  15. What is the difference between self- and mutual inductance?
  16. Are eddy current questions common?
  17. Should I study EMI before Alternating Current?

Electromagnetic Induction (EMI) is a short chapter built on two laws: Faraday's law gives the size of the induced emf, and Lenz's law gives its direction. NEET questions on it are usually one-step numericals on flux and inductance, or reasoning questions on eddy currents and the direction of induced current. This post shows how often EMI has been asked, what the questions test, and five past NEET questions solved in full.

How often Electromagnetic Induction is asked in NEET

These are Pareeksha's own counts from the NEET and AIPMT papers digitised on the site, with each question tagged to one chapter. In years with more than one paper, the count combines all papers held that year. A few digitised papers are a few questions short of the full paper, and figure questions are counted.

Year Questions
2016 1
2017 0
2018 1
2019 2
2020 0
2021 1
2022 2
2023 1
2024 2
2025 1
2026 3

In the 18 NEET papers from 2016 to 2026 on Pareeksha, EMI had 14 of 531 Physics questions, ranking 21st of 29 Physics chapters. In the 10 papers from 2021 to 2026 it had 10 of 347 Physics questions, about 2.9% of the section, which is roughly one per paper. NEET 2013 had 1 more and the AIPMT papers from 1988 to 2015 had 19. Across all 51 papers on the site, 34 questions are tagged here.

The recent trend is upward: every year from 2021 to 2026 had at least one EMI question, and the two 2026 papers had three between them. The Physics chapter-wise weightage table shows it beside Alternating Current, which follows directly from it.

What the questions test

The NEET questions from 2016 to 2026 group into four clusters:

  1. Flux and Faraday's law. Flux through a loop at an angle (2022), emf from a flux that varies with time (2022), and a coil rotated or flipped in a field (2019).
  2. Self- and mutual inductance. Flux linkage and inductance of a solenoid (2016, 2026 re-exam), mutual inductance of coplanar loops (2021), and inductors connected in different ways (2026 re-exam).
  3. Energy in an inductor. $U = \frac{1}{2}LI^2$ (2018, 2023), and the potential difference across an inductor with changing current (2025).
  4. Lenz's law and eddy currents. Direction of induced current when a magnet moves between solenoids (2024), forces on conducting and magnetic sheets (2024), devices that do not use eddy currents (2019), and a loop in a field (2026 re-exam).

Solved NEET past questions

Each question is copied from the paper with its official answer. The solutions are our own working.

Q1. NEET 2026 re-exam, Question 5

Source: NEET (UG) 2026 re-exam paper

Consider a long solenoid of length $l$ and radius r. If n is the number of turns per unit length and $\mu_0$ is the permeability of free space, the inductance of the solenoid is :

  • (A) $\mu_0\pi n^2r^2l$
  • (B) $\mu_0 n^2r^2l$
  • (C) $(\mu_0/2\pi)n^2r^2l$
  • (D) $2\mu_0\pi n^2r^2l$

Official answer: (A)

Solution. Inside the solenoid $B = \mu_0 nI$. There are $nl$ turns, each of area $\pi r^2$, so the total flux linkage is $N\Phi = (nl)(\mu_0 nI)(\pi r^2)$. Dividing by $I$ gives $L = \mu_0 n^2 \pi r^2 l$. This is the standard $L = \mu_0 n^2 A l$ with $A = \pi r^2$.

Q2. NEET 2024, Question 49

Source: NEET (UG) 2024 paper

A sheet is placed on a horizontal surface in front of a strong magnetic pole. A force is needed to :

A. hold the sheet there if it is magnetic.

B. hold the sheet there if it is non-magnetic.

C. move the sheet away from the pole with uniform velocity if it is conducting.

D. move the sheet away from the pole with uniform velocity if it is both, non-conducting and non-polar.

Choose the correct statement(s) from the options given below:

  • (A) A, C and D only
  • (B) C only
  • (C) B and D only
  • (D) A and C only

Official answer: (D)

Solution. A: a magnetic sheet is attracted to the pole, so holding it needs a force. True. B: a non-magnetic sheet at rest feels no magnetic force. False. C: moving a conducting sheet through the non-uniform field changes the flux through it, which induces eddy currents; by Lenz's law they oppose the motion, so a force is needed to keep the speed constant. True. D: a non-conducting, non-polar sheet has no eddy currents and no magnetic attraction. False. So A and C.

Q3. NEET 2023, Question 4

Source: NEET (UG) 2023 paper

The magnetic energy stored in an inductor of inductance $4\ \mu\mathrm{H}$ carrying a current of 2 A is :

  • (A) $4\ \mu\mathrm{J}$
  • (B) $4\ \mathrm{mJ}$
  • (C) $8\ \mathrm{mJ}$
  • (D) $8\ \mu\mathrm{J}$

Official answer: (D)

Solution. $U = \frac{1}{2}LI^2 = \frac{1}{2} \times 4\times10^{-6} \times 4 = 8\times10^{-6}$ J $= 8\ \mu$J. The options test two slips at once: forgetting to square the current (4 μJ) and mixing micro with milli (8 mJ).

Q4. NEET 2022 (second paper), Question 175

Source: NEET (UG) 2022 Phase 2 paper

The magnetic flux linked to a circular coil of radius R is

$\phi=2{t}^{3}+4{t}^{2}+2t+5$ Wb

The magnitude of induced emf in the coil at t = 5 s is

  • (A) 192 V
  • (B) 108 V
  • (C) 197 V
  • (D) 150 V

Official answer: (A)

Solution. By Faraday's law, $|e| = \frac{d\phi}{dt} = 6t^2 + 8t + 2$. At $t = 5$ s: $6(25) + 8(5) + 2 = 150 + 40 + 2 = 192$ V. The constant 5 Wb drops out on differentiation, and the radius is not needed. Option (C), 197, is what you get by keeping the constant.

Q5. NEET 2022, Question 147

Source: NEET (UG) 2022 paper

A square loop of side 1 m and resistance 1 $\Omega$ is placed in a magnetic field of 0.5 T. If the plane of loop is perpendicular to the direction of magnetic field, the magnetic flux through the loop is

  • (A) 2 weber
  • (B) 0.5 weber
  • (C) 1 weber
  • (D) Zero weber

Official answer: (B)

Solution. $\Phi = BA\cos\theta$, where $\theta$ is the angle between the field and the normal to the loop. If the plane is perpendicular to the field, the normal is along the field, so $\theta = 0$ and $\Phi = 0.5 \times 1 \times 1 = 0.5$ Wb. Zero flux would apply only if the field lay in the plane of the loop.

Key formulas and facts

Idea Result
Magnetic flux $\Phi = BA\cos\theta$ ($\theta$ between $\vec{B}$ and the normal)
Faraday's law $e = -N\frac{d\Phi}{dt}$
Motional emf $e = Blv$
Rotating coil $e = NBA\omega\sin\omega t$, peak $NBA\omega$
Charge through a coil $q = \frac{N\Delta\Phi}{R}$
Self-inductance $N\Phi = LI$; $e = -L\frac{dI}{dt}$
Long solenoid $L = \mu_0 n^2 A l = \frac{\mu_0 N^2 A}{l}$
Energy in an inductor $U = \frac{1}{2}LI^2$
Mutual inductance $N_2\Phi_2 = MI_1$; $e_2 = -M\frac{dI_1}{dt}$
Inductors (no mutual coupling) series $L_1 + L_2$; parallel $\frac{L_1L_2}{L_1 + L_2}$

Common traps

  • "Plane perpendicular to the field." This means the normal is along the field and the flux is maximum. Many students read it as zero flux.
  • Constant terms in flux. A constant in $\phi(t)$ gives no emf. Only changes in flux induce emf.
  • Charge does not depend on speed. The charge that flows when a coil's flux changes is $\frac{N\Delta\Phi}{R}$, however fast or slowly the change happens.
  • Lenz's law direction. The induced current opposes the change in flux, not the flux itself. A magnet approaching a coil is repelled; a magnet moving away is attracted.
  • Unit prefixes. μH and mH questions almost always have options that differ by 1,000.
  • Inductor voltage with changing current. In a circuit segment with an inductor, $V_A - V_B$ includes $L\frac{dI}{dt}$, whose sign depends on whether the current is rising or falling.

How to study Electromagnetic Induction for NEET

  1. Master flux first. Most EMI mistakes come from the angle in $BA\cos\theta$. The Electromagnetic Induction chapter in Pareeksha's Magnetism, Electromagnetic Induction and AC book starts there and builds to inductance, with practice questions, in Hindi and Telugu as well.
  2. Practise Lenz's law with drawings. Draw the magnet, the coil and the induced current direction for each case: approaching, receding, current switched on, current switched off.
  3. Solve all past questions. The 34 tagged questions are on the NEET past-paper page. Start with 2021 to 2026, where the chapter has appeared every year.
  4. Take a timed chapter test. The 15-question, 15-minute chapter tests are on the NEET UG exam dashboard (login needed).
  5. Study it with its neighbours. The field formulas come from Moving Charges and Magnetism NEET PYQs. The rotating coil and inductors lead straight into Alternating Current NEET PYQs, and material properties are in Magnetism and Matter NEET PYQs.

Frequently asked questions

How many questions come from Electromagnetic Induction in NEET?

About one per paper. In the 10 NEET papers from 2021 to 2026 on Pareeksha, EMI had 10 of 347 Physics questions, and every year in that period had at least one.

Is EMI a hard chapter for NEET?

It is short and the questions are mostly one-step. The difficulty is in the details: the angle in the flux formula, the direction from Lenz's law, and unit prefixes. With practice, these become reliable marks.

What is the difference between self- and mutual inductance?

Self-inductance links a coil's own current to the flux through itself. Mutual inductance links the current in one coil to the flux through another. Both are measured in henry.

Are eddy current questions common?

They appear as reasoning questions, for example in 2019 (which device does not use eddy currents) and 2024 (forces on a sheet near a magnet). Learn the uses (electromagnetic braking, induction furnaces, dead-beat galvanometers) and how lamination reduces eddy-current losses.

Should I study EMI before Alternating Current?

Yes. The AC generator, inductive reactance and transformers all come from EMI, so the order matters.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.