Technique 11 of 37
Decimals and mental calculation
दशमलव और मानसिक गणना
Multiply and divide decimals by working with whole numbers, use 0.5, 0.25, 0.125 and 0.75 as fractions, and avoid the place-value mistakes that cost marks.
When to use it · कब उपयोग करें
Any simplification, average, speed, money or measurement question with decimals, and whenever a divisor like 0.25, 0.125 or 0.2 appears.
दशमलव वाला कोई भी सरलीकरण, औसत, चाल, पैसे या माप का प्रश्न, और जब भी 0.25, 0.125 या 0.2 जैसा भाजक आए।
The method · विधि
Multiply: forget the points, then restore them · गुणा: बिंदु भूलें, फिर वापस लगाएँ
Remove every decimal point, multiply the whole numbers, then count the total decimal places in the two original numbers and place the point that many places from the right. For 0.06 × 0.7: 6 × 7 = 42, and there are 2 + 1 = 3 places, so the answer is 0.042. Pad with zeros on the left when you run out of digits. For 2.5 × 0.04: 25 × 4 = 100, with 3 places, gives 0.100, which is 0.1.
सभी दशमलव बिंदु हटाएँ, पूर्ण संख्याओं का गुणा करें, फिर दोनों मूल संख्याओं के दशमलव स्थान गिनें और उतने स्थान दाएँ से गिनकर बिंदु लगाएँ। 0.06 × 0.7 में: 6 × 7 = 42, और 2 + 1 = 3 स्थान हैं, इसलिए उत्तर 0.042। अंक कम पड़ें तो बाईं ओर शून्य भरें। 2.5 × 0.04 में: 25 × 4 = 100, 3 स्थान के साथ 0.100 बनता है, यानी 0.1।
Divide: shift both numbers the same way until the divisor is whole · भाग: दोनों संख्याओं को एक साथ खिसकाएँ जब तक भाजक पूर्ण न हो
Multiply the dividend and the divisor by the same power of 10 so the divisor becomes a whole number. The quotient does not change. For 4.5 ÷ 0.15, multiply both by 100: 450 ÷ 15 = 30. For 3.6 ÷ 0.9, multiply by 10: 36 ÷ 9 = 4. Never shift just one of them.
भाज्य और भाजक को 10 की एक ही घात से गुणा करें ताकि भाजक पूर्ण संख्या बन जाए। भागफल नहीं बदलता। 4.5 ÷ 0.15 में दोनों को 100 से गुणा करें: 450 ÷ 15 = 30। 3.6 ÷ 0.9 में 10 से गुणा करें: 36 ÷ 9 = 4। केवल एक को कभी न खिसकाएँ।
Turn decimals into the fractions you already know · दशमलव को उन भिन्नों में बदलें जो आपको आती हैं
Dividing by 0.5 is multiplying by 2, by 0.25 is multiplying by 4, by 0.2 is multiplying by 5, by 0.125 is multiplying by 8. Multiplying by 0.25 is dividing by 4, by 0.125 is dividing by 8. For 7.5 ÷ 0.25: 7.5 × 4 = 30. For 36 × 0.125: 36 ÷ 8 = 4.5. For 0.64 × 12.5, note 12.5 = 100 ÷ 8, so 0.64 × 100 = 64 and 64 ÷ 8 = 8. Learn this set: 0.5 = 1/2, 0.25 = 1/4, 0.75 = 3/4, 0.2 = 1/5, 0.125 = 1/8, 0.375 = 3/8, 0.625 = 5/8, 0.875 = 7/8.
0.5 से भाग यानी 2 से गुणा, 0.25 से भाग यानी 4 से गुणा, 0.2 से भाग यानी 5 से गुणा, 0.125 से भाग यानी 8 से गुणा। 0.25 से गुणा यानी 4 से भाग, 0.125 से गुणा यानी 8 से भाग। 7.5 ÷ 0.25 में: 7.5 × 4 = 30। 36 × 0.125 में: 36 ÷ 8 = 4.5। 0.64 × 12.5 में 12.5 = 100 ÷ 8 है, इसलिए 0.64 × 100 = 64 और 64 ÷ 8 = 8। यह समूह याद करें: 0.5 = 1/2, 0.25 = 1/4, 0.75 = 3/4, 0.2 = 1/5, 0.125 = 1/8, 0.375 = 3/8, 0.625 = 5/8, 0.875 = 7/8।
Fractions of a number: divide first, then multiply · किसी संख्या का भिन्न: पहले भाग, फिर गुणा
For 0.375 of 640, use 3/8: 640 ÷ 8 = 80, then 80 × 3 = 240. For 0.75 × 2.4, use 3/4: 2.4 ÷ 4 = 0.6, then 0.6 × 3 = 1.8. Dividing first keeps the numbers small. Use the fraction form whenever the decimal is one of the standard eighths or quarters; otherwise use the points method.
640 का 0.375 लेने के लिए 3/8 लगाएँ: 640 ÷ 8 = 80, फिर 80 × 3 = 240। 0.75 × 2.4 के लिए 3/4 लगाएँ: 2.4 ÷ 4 = 0.6, फिर 0.6 × 3 = 1.8। पहले भाग देने से संख्याएँ छोटी रहती हैं। जब दशमलव आठवें या चौथाई वाले मानक भिन्न हों तो भिन्न रूप लगाएँ; वरना बिंदु वाली विधि लगाएँ।
Add and subtract: line up the points, not the digits · जोड़-घटाव: बिंदु को सीध में रखें, अंकों को नहीं
Pad with zeros so both numbers have the same decimal places. 5.2 + 0.38 becomes 5.20 + 0.38 = 5.58, and then 5.58 − 1.7 becomes 5.58 − 1.70 = 3.88. The sum is right only because tenths sit under tenths, not because of how many digits each number has; adding 5.2 + 0.38 as 52 + 38 would give a wrong 90.
शून्य भरकर दोनों संख्याओं के दशमलव स्थान बराबर करें। 5.2 + 0.38 को 5.20 + 0.38 = 5.58 बनाएँ, फिर 5.58 − 1.7 को 5.58 − 1.70 = 3.88 बनाएँ। योग तभी सही आता है जब दशमांश दशमांश के नीचे हो, इस पर नहीं कि किस संख्या में कितने अंक हैं; 5.2 + 0.38 को 52 + 38 की तरह जोड़ने पर गलत 90 मिलेगा।
Sanity check before you tick the option · विकल्प चुनने से पहले एक झटपट जाँच
Round each number and see if the answer is the right size. 0.3 × 0.4 should be about a tenth of 1, so 0.12 is believable and 1.2 or 0.012 is not. 4.5 ÷ 0.15 should be big: 4.5 is thirty times 0.15, so the answer is 30. Multiplying by a number below 1 makes things smaller; dividing by a number below 1 makes them bigger. This one-second check catches the classic slip of moving the point the wrong way.
हर संख्या को पूर्णांक के पास लाकर देखें कि उत्तर सही आकार का है या नहीं। 0.3 × 0.4 लगभग 1 का दसवाँ हिस्सा होना चाहिए, इसलिए 0.12 ठीक लगता है और 1.2 या 0.012 नहीं। 4.5 ÷ 0.15 बड़ा आना चाहिए: 4.5, 0.15 का तीस गुना है, इसलिए उत्तर 30। 1 से छोटी संख्या से गुणा करने पर मान घटता है; 1 से छोटी संख्या से भाग देने पर बढ़ता है। यह एक सेकंड की जाँच बिंदु को उलटी दिशा में खिसकाने वाली क्लासिक चूक पकड़ लेती है।
Typically appears in simplification questions (the first block of many SSC and banking papers), in data interpretation where tables carry decimal values, in average, speed-distance and unit-conversion questions with decimal inputs, and in percentage questions where the working is easier in decimal form.
सामान्यतः सरलीकरण प्रश्नों में आता है (कई SSC और बैंकिंग पत्रों का पहला खंड), डेटा इंटरप्रिटेशन में जहाँ तालिकाओं में दशमलव मान हों, औसत, चाल-दूरी और इकाई-परिवर्तन के उन प्रश्नों में जिनमें दशमलव आँकड़े हों, और प्रतिशत के उन प्रश्नों में जहाँ दशमलव रूप में गणना आसान हो।
Worked examples · हल किए उदाहरण
20 examples, graded from warm-up to hard. Cover the steps and solve each one before reading it.
Warm-up (7)
- Pad the zeros: 5.20 + 0.38 = 5.58
- 5.58 − 1.70 = 3.88
- 3 × 4 = 12
- One place plus one place makes two decimal places
- Answer 0.12
- 6 × 7 = 42
- Two places plus one place makes three decimal places
- Pad a zero on the left: 0.042
- 25 × 4 = 100
- One place plus two places makes three decimal places
- 100 with three places is 0.100, which is 0.1
- 12 × 12 = 144
- Two plus two places makes four decimal places
- Pad a zero: 0.0144
- Multiply both by 10
- 36 ÷ 9 = 4
- Multiply both by 100
- 450 ÷ 15 = 30
Exam level (7)
- Multiply both by 100
- 4.8 ÷ 12 = 0.4
- Check: 0.12 × 0.4 = 0.048
- Multiply both by 10
- 0.4 ÷ 2 = 0.2
- Trap: answering 0.02 is wrong because dividing by a number below 1 should make the result bigger than 0.04
- Dividing by 0.5 means multiplying by 2
- 0.02 × 2 = 0.04
- Dividing by 0.25 means multiplying by 4
- 7.5 × 4 = 30
- Multiplying by 0.125 means dividing by 8
- 36 ÷ 8 = 4.5
- A tap fills 0.75 litre per second. How many seconds for 18 litres?
- Dividing by 3/4 means multiplying by 4/3: 18 × 4 = 72
- 72 ÷ 3 = 24
- Use 3/4: 2.4 ÷ 4 = 0.6
- 0.6 × 3 = 1.8
Hard (6)
- 12.5 is 100 ÷ 8
- 0.64 × 100 = 64
- 64 ÷ 8 = 8
- 0.375 is 3/8
- 640 ÷ 8 = 80
- 80 × 3 = 240
- 625 × 16 = 10000 (625 is 5 × 5 × 5 × 5 and 16 is 2 × 2 × 2 × 2, so together they make 10 × 10 × 10 × 10)
- Two places plus two places makes four decimal places
- 10000 with four places is 1.0000, which is 1
- Multiply both by 1000 so the divisor becomes 12
- 1440 ÷ 12 = 120
- Change every term to a decimal
- 3 ÷ 8 = 0.375, 1 ÷ 4 = 0.25
- 0.375 + 0.125 + 0.25 = 0.75
- Do the bracket: 0.8 × 0.5 = 0.4
- Multiply both by 100: 40 ÷ 2 = 20
- Check size: 0.4 is twenty times 0.02, so the answer is 20
Why it works · यह क्यों काम करता है
A decimal like 0.06 is 6 ÷ 100 and 0.7 is 7 ÷ 10. So 0.06 × 0.7 = (6 × 7) ÷ (100 × 10) = 42 ÷ 1000 = 0.042: the number of decimal places in the answer is the sum of the places in the factors. For division, a ÷ b = (a × 10ᵏ) ÷ (b × 10ᵏ), so multiplying both by the same power of 10 never changes the quotient. Dividing by 0.25 is multiplying by 1 ÷ 0.25 = 4, which is why the standard decimals are worth learning as fractions.
0.06 असल में 6 ÷ 100 है और 0.7 असल में 7 ÷ 10। इसलिए 0.06 × 0.7 = (6 × 7) ÷ (100 × 10) = 42 ÷ 1000 = 0.042: उत्तर में दशमलव स्थानों की संख्या गुणकों के स्थानों का योग होती है। भाग में a ÷ b = (a × 10ᵏ) ÷ (b × 10ᵏ), इसलिए दोनों को 10 की एक ही घात से गुणा करने पर भागफल कभी नहीं बदलता। 0.25 से भाग देना, 1 ÷ 0.25 = 4 से गुणा करना है, इसीलिए मानक दशमलवों को भिन्न की तरह सीखना लाभदायक है।
The classic place-value mistakes: 0.3 × 0.3 is 0.09 (not 0.9); 0.1 × 0.1 is 0.01 (not 0.1); 0.04 ÷ 0.2 is 0.2 (not 0.02); 0.5² is 0.25. Also do not add a zero on the right when you need one on the left: 0.06 × 0.7 is 0.042, not 0.42. If the answer to a multiplication of two numbers below 1 is bigger than either of them, something has gone wrong.
अंक-स्थान की क्लासिक गलतियाँ: 0.3 × 0.3 = 0.09 है (0.9 नहीं); 0.1 × 0.1 = 0.01 है (0.1 नहीं); 0.04 ÷ 0.2 = 0.2 है (0.02 नहीं); 0.5² = 0.25 है। जहाँ बाईं ओर शून्य चाहिए वहाँ दाईं ओर शून्य न लगाएँ: 0.06 × 0.7 = 0.042 है, 0.42 नहीं। यदि 1 से छोटी दो संख्याओं के गुणन का उत्तर दोनों से बड़ा आए, तो कुछ गलत हुआ है।
For awkward decimals such as 0.37 × 0.83 there is no shortcut: multiply 37 × 83 = 3071 as whole numbers and place the point, giving 0.3071. The fraction tricks help only for the standard decimals (0.5, 0.25, 0.125, 0.2, 0.75 and their multiples). For long divisions like 3.7 ÷ 0.13, estimate and use the options rather than computing every digit.
0.37 × 0.83 जैसे बेढंगे दशमलवों के लिए कोई शॉर्टकट नहीं है: पूर्ण संख्याओं की तरह 37 × 83 = 3071 करें और बिंदु लगाएँ, जिससे 0.3071 मिलता है। भिन्न वाली तरकीबें केवल मानक दशमलवों (0.5, 0.25, 0.125, 0.2, 0.75 और उनके गुणजों) में मदद करती हैं। 3.7 ÷ 0.13 जैसे लंबे भाग में हर अंक निकालने की जगह अनुमान लगाएँ और विकल्पों का उपयोग करें।
Practise this technique Practice questions are part of the Pro Pass; a few samples are free.
Related techniques
Open the cheat sheets for squares, cubes, fractions and divisibility rules.