p-Block Elements is the single largest Chemistry chapter in NEET. In the 18 NEET sittings from 2016 to 2026 on Pareeksha, it had 48 of 624 tagged Chemistry questions, more than any other chapter. In the 10 papers from 2021 to 2026 it had 24, tied for first with Coordination Compounds and Aldehydes, Ketones and Carboxylic Acids. Some digitised papers are a few questions short of the full paper, so treat these as close counts, not exact ones.
It is also a chapter where students feel buried in facts. The way through is to learn each group as a set of trends, then the anomalies, then a short list of compounds. This post does that for all six groups and works through five NEET past questions.
What the syllabus says
The NMC syllabus for NEET (UG) 2026 describes Unit 10, p-Block Elements, briefly: Group 13 to Group 18 elements, electronic configuration, general trends in physical and chemical properties across periods and down groups, and the unique behaviour of the first element in each group. That is shorter than the chapter students used to study, which listed many individual compounds.
The questions in our recent data fit that description. They ask about trends (boiling points of hydrides, oxidation states), the anomalous first member (boron, nitrogen, oxygen, fluorine), and the structures and properties of well-known compounds that illustrate those trends ($\mathrm{PCl_5}$, the oxoacids of phosphorus, interhalogens, xenon fluorides). Learn the compounds as examples of trends rather than as a catalogue. Check the unit text with the NEET 2027 information bulletin when it is released; our syllabus page has the current list.
Two ideas that explain most of the chapter
1. The first member is different. B, C, N, O and F are small, highly electronegative, and have no d orbitals in their valence shell. So they cannot expand their octet (maximum covalency 4), they form strong $p\pi$–$p\pi$ multiple bonds (N≡N, C=O, O=O), and they form strong hydrogen bonds (N, O, F). Their heavier relatives do the opposite on each count.
2. The inert pair effect. Down groups 13 to 15, the $ns^2$ electrons become reluctant to take part in bonding, because poor shielding by the d and f electrons holds them in. So the oxidation state two below the group maximum becomes more stable:
| Group | Group oxidation state | Lower state that becomes more stable down the group |
|---|---|---|
| 13 | +3 | +1 (Tl(I) is more stable than Tl(III)) |
| 14 | +4 | +2 (Pb(II) is more stable than Pb(IV), so $\mathrm{PbO_2}$ is a strong oxidising agent) |
| 15 | +5 | +3 (Bi(III) is more stable than Bi(V)) |
The stability of the +1 state in group 13 increasing as Al < Ga < In < Tl was asked in AIPMT 2009 and again, word for word, in AIPMT 2015. Questions on this effect keep coming back.
Group 13: boron family
- Boron is a non-metal; the rest are metals. Gallium melts at about 303 K, low enough to melt in the hand.
- Boron cannot exceed four bonds. Its trihalides are electron-deficient Lewis acids. Al, Ga and In can use d orbitals to form $\mathrm{[M(H_2O)_6]^{3+}}$; boron cannot (asked in NEET 2023 Manipur, below).
- Lewis acid strength of boron trihalides: $\mathrm{BF_3 < BCl_3 < BBr_3 < BI_3}$. This runs opposite to electronegativity because back-donation from fluorine's 2p lone pair into boron's empty 2p orbital is strongest for $\mathrm{BF_3}$ (good size match), which reduces its electron deficiency.
- Boric acid, $\mathrm{H_3BO_3}$, is a weak monobasic acid. It is a Lewis acid: it accepts $\mathrm{OH^-}$ from water rather than giving away its own $\mathrm{H^+}$.
- Diborane, $\mathrm{B_2H_6}$, has two bridging hydrogens held by three-centre two-electron bonds, and four terminal B–H bonds.
- Potash alum, $\mathrm{K_2SO_4\cdot Al_2(SO_4)_3\cdot 24H_2O}$, is a double salt; its preparation is part of Unit 20 of the syllabus. See our practical chemistry guide.
Group 14: carbon family
- Carbon shows the strongest catenation (C–C bonds are strong); silicon much less.
- Carbon forms $p\pi$–$p\pi$ double bonds, so $\mathrm{CO_2}$ is a linear gas. Silicon does not, so $\mathrm{SiO_2}$ is a network solid of $\mathrm{SiO_4}$ tetrahedra.
- CO is a neutral oxide and a strong ligand (it binds to haemoglobin far more strongly than oxygen does, which is why it is poisonous). $\mathrm{CO_2}$ is acidic.
- $\mathrm{CCl_4}$ is not hydrolysed by water (carbon has no d orbitals to accept water's lone pair), while $\mathrm{SiCl_4}$ is.
- Lead(IV) compounds are oxidising agents, because of the inert pair effect; tin(II) compounds are reducing agents.
Group 15: nitrogen family
- Nitrogen exists as $\mathrm{N_2}$ with a very strong triple bond, which makes it unreactive. It cannot form $\mathrm{NCl_5}$ (no d orbitals), while phosphorus forms $\mathrm{PCl_5}$.
- Hydrides $\mathrm{EH_3}$: all five exist, including arsine, $\mathrm{AsH_3}$ (asked in NEET 2025). Down the group, thermal stability and basic strength decrease and reducing character increases. Bond angle decreases from $\mathrm{NH_3}$ (about 107°) towards $\mathrm{PH_3}$ (about 93°). Ammonia's boiling point is far above phosphine's because of hydrogen bonding.
- Oxides: the group forms $\mathrm{E_2O_3}$ and $\mathrm{E_2O_5}$ types. Antimony does form $\mathrm{Sb_2O_5}$. Acidic character falls down the group: oxides of N and P are acidic, As and Sb oxides amphoteric, Bi oxide mainly basic.
- $\mathrm{PCl_5}$ is trigonal bipyramidal, $sp^3d$. The two axial bonds are longer than the three equatorial bonds. In the solid it exists as $\mathrm{[PCl_4]^+[PCl_6]^-}$.
- Oxoacids of phosphorus: count P–OH bonds for basicity.
| Acid | P–OH bonds | P–H bonds | Basicity | Note |
|---|---|---|---|---|
| $\mathrm{H_3PO_2}$ (hypophosphorous) | 1 | 2 | Monobasic | Strong reducing agent (P–H bonds) |
| $\mathrm{H_3PO_3}$ (phosphorous) | 2 | 1 | Dibasic | Reducing agent; disproportionates on heating |
| $\mathrm{H_3PO_4}$ (orthophosphoric) | 3 | 0 | Tribasic | Not reducing |
| $\mathrm{H_4P_2O_7}$ (pyrophosphoric) | 4 | 0 | Tetrabasic | P–O–P link |
Group 16: oxygen family
- Oxygen is paramagnetic as $\mathrm{O_2}$ (two unpaired electrons in antibonding orbitals) and is the only member that is a gas. Ozone, $\mathrm{O_3}$, is bent and a powerful oxidising agent.
- Hydrides: boiling points run $\mathrm{H_2O > H_2Te > H_2Se > H_2S}$. Water is highest because of hydrogen bonding; among the others boiling point rises with mass. Acid strength runs the other way: $\mathrm{H_2O < H_2S < H_2Se < H_2Te}$, because the H–E bond gets longer and weaker down the group. Thermal stability decreases down the group.
- Sulphur forms $\mathrm{SF_6}$ (octahedral, $sp^3d^2$); oxygen cannot form $\mathrm{OF_6}$.
- Sulphuric acid is made by the contact process, where $\mathrm{SO_2}$ is oxidised to $\mathrm{SO_3}$ over $\mathrm{V_2O_5}$; $\mathrm{SO_3}$ is absorbed in $\mathrm{H_2SO_4}$ to give oleum, $\mathrm{H_2S_2O_7}$.
Group 17: halogens
- Fluorine is the most electronegative element and the strongest oxidising agent among the halogens. It shows only the −1 oxidation state; the others also show +1, +3, +5 and +7.
- Electron gain enthalpy: Cl is more negative than F (small, crowded 2p subshell in F).
- Bond dissociation enthalpy: $\mathrm{Cl_2 > Br_2 > F_2 > I_2}$. $\mathrm{F_2}$ is unusually weak because of repulsion between lone pairs on the two small atoms.
- Hydrogen halides: acid strength $\mathrm{HF < HCl < HBr < HI}$ (bond strength falls). Boiling point $\mathrm{HCl < HBr < HI < HF}$ (HF is hydrogen bonded).
- Oxoacids of chlorine: acid strength $\mathrm{HOCl < HClO_2 < HClO_3 < HClO_4}$. More oxygen atoms spread the negative charge of the anion, stabilising it.
- Interhalogen shapes: $\mathrm{ClF_3}$ T-shaped, $\mathrm{BrF_5}$ square pyramidal, $\mathrm{IF_7}$ pentagonal bipyramidal. Our bonding and shapes guide shows how to get these from VSEPR in seconds.
Group 18: noble gases
- Xenon forms compounds because its ionisation enthalpy is the lowest of the stable noble gases.
- Xenon fluorides: $\mathrm{XeF_2}$ linear (3 lone pairs), $\mathrm{XeF_4}$ square planar (2 lone pairs), $\mathrm{XeF_6}$ distorted octahedral (1 lone pair).
- Helium is used with oxygen in breathing mixtures for divers because it is much less soluble in blood than nitrogen.
Five NEET past questions, solved
1. NEET (UG) 2024 Re-exam, Q113. Identify the incorrect statement about $\mathrm{PCl_5}$.
(A) possesses two different bond angles (B) All five bonds are identical in length (C) exhibits $sp^3d$ hybridisation (D) consists of five $\sigma$ (sigma) bonds
Official answer: (B). Axial bonds are longer than equatorial ones because they meet more repulsion from the bond pairs at 90°. See the paper.
2. NEET (UG) 2024, Q61. Given below are two statements: Statement I : The boiling point of hydrides of Group 16 elements follow the order $\mathrm{H_2O>H_2Te>H_2Se>H_2S}$. Statement II : On the basis of molecular mass, $\mathrm{H_2O}$ is expected to have lower boiling point than the other members of the group but due to the presence of extensive H-bonding in $\mathrm{H_2O}$, it has higher boiling point. In the light of the above statements, choose the correct answer from the options given below:
(A) Statement I is true but Statement II is false. (B) Statement I is false but Statement II is true. (C) Both Statement I and Statement II are true. (D) Both Statement I and Statement II are false.
Official answer: (C). Both are true, and Statement II is the reason for Statement I. See the paper.
3. NEET (UG) 2025, Q52. Given below are two statements : Statement I : Like nitrogen that can form ammonia, arsenic can form arsine. Statement II : Antimony cannot form antimony pentoxide. In the light of the above statements, choose the most appropriate answer from the options given below :
(A) Both Statement I and Statement II are correct (B) Both Statement I and Statement II are incorrect (C) Statement I is correct but Statement II is incorrect (D) Statement I is incorrect but Statement II is correct
Official answer: (C). Every group 15 element forms $\mathrm{EH_3}$, and antimony forms both $\mathrm{Sb_2O_3}$ and $\mathrm{Sb_2O_5}$. See the paper.
4. NEET (UG) 2023 Manipur, Q107. Select the element (M) whose trihalides cannot be hydrolysed to produce an ion of the form $\mathrm{[M(H_2O)_6]^{3+}}$
(A) Ga (B) In (C) Al (D) B
Official answer: (D). Boron has no d orbitals, so its maximum covalency is four. This is the "first member is different" idea in a single question.
5. NEET (UG) 2026 Re-exam, Q49. In potash alum, the ratio of $\mathrm{K^+}$ and $\mathrm{SO_4^{2-}}$ ions is
(A) $1:2$ (B) $2:1$ (C) $2:3$ (D) $3:2$
Official answer: (A). $\mathrm{KAl(SO_4)_2\cdot 12H_2O}$ has one $\mathrm{K^+}$ for every two sulphate ions. A formula you can write correctly is worth a mark. See the paper.
How to study p-Block
- One page per group, in the same layout every time: configuration, oxidation states, anomalous first member, hydrides, oxides, halides, oxoacids, two or three key compounds.
- Write the reason next to every order. "HF has the highest boiling point among HX" is a fact; "because of hydrogen bonding" is what lets you answer the next question.
- Revise little and often. Ten minutes a day on these pages beats a two-hour session once a fortnight. Our inorganic memory tricks post gives a revision schedule.
- Solve the past questions. The p-Block Elements PYQ post has more solved questions; the study chapter is Inorganic Chemistry, chapter 2 (also in Hindi and Telugu). After that, take the 15-question chapter test at /dashboard/exams/neet-ug (login needed) and work through recent papers on the past-paper page.
Metallurgy, s-Block Elements and Hydrogen, which older papers often tested alongside p-Block, are marked "old syllabus" in our data and are not current units; see the dropped chapters list. For how p-Block compares with every other Chemistry chapter, see the weightage page and our NEET Chemistry preparation strategy.
Frequently asked questions
Is p-Block the most important Chemistry chapter for NEET?
By past-paper count, yes. In the NEET papers from 2016 to 2026 on Pareeksha it had 48 of 624 tagged Chemistry questions, the most of any chapter. In 2021–2026 it averaged 2.4 questions per paper, slightly lower than the 3.0 per paper of 2016–2020, and was tied for first with two other chapters.
Which p-block groups are in the NEET syllabus?
The NMC syllabus for NEET (UG) 2026 covers Group 13 to Group 18. Groups 1 and 2 (the s-block) are no longer a separate unit, though their positions and trends still appear in periodic-table questions.
Why is $\mathrm{BF_3}$ a weaker Lewis acid than $\mathrm{BCl_3}$?
In $\mathrm{BF_3}$, a lone pair on fluorine is partly donated back into boron's empty 2p orbital. The 2p–2p overlap is efficient because the orbitals are similar in size, so boron becomes less electron-deficient. With chlorine and bromine the overlap is poorer, so boron stays more electron-deficient and accepts lone pairs more readily.
Why is $\mathrm{H_3PO_3}$ dibasic and not tribasic?
Only hydrogens attached to oxygen are acidic. $\mathrm{H_3PO_3}$ has two P–OH groups and one hydrogen bonded directly to phosphorus. The P–H hydrogen does not ionise, so the acid gives up only two protons.
Do I need to learn the industrial preparations of compounds?
The current syllabus wording focuses on trends and the first element's unique behaviour. Learn the few processes that keep appearing as examples, such as the contact process for sulphuric acid with its $\mathrm{V_2O_5}$ catalyst, but spend most of your time on trends, structures and the reasons behind them.

Comments (0)
No comments yet. Be the first to share your thoughts.