LATEST
NEETBy Pareeksha Editorial Team· ⏱ 10 min read

Periodic Trends for NEET: Rules, Exceptions and the Why

Share𝕏fin
Alongside this guide

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →
Periodic Trends for NEET: Rules, Exceptions and the Why
On this page
  1. How much this chapter is worth
  2. The two forces behind every trend
  3. Atomic and ionic radius
  4. Ionisation enthalpy
  5. Electron gain enthalpy
  6. Electronegativity
  7. Metallic character and the nature of oxides
  8. Valence and oxidation states
  9. Four NEET past questions, solved
  10. A note on chapters that left the syllabus
  11. How to study this chapter
  12. Frequently asked questions
  13. Why is the first ionisation enthalpy of nitrogen higher than that of oxygen?
  14. Why does chlorine have a more negative electron gain enthalpy than fluorine?
  15. Is gallium smaller than aluminium?
  16. Which element has the highest electronegativity and which has the highest ionisation enthalpy?
  17. How many questions come from periodic trends in NEET?

Periodic trends look like the easiest chapter in inorganic chemistry. Radius falls across a period and rises down a group; ionisation enthalpy does the opposite. Students learn that in an hour and then lose marks, because NEET questions on this chapter are almost always about the places where the simple rule fails.

This post sets out each trend, lists the exceptions that have been asked, and gives the reason behind each one. If you know the reason, you can handle an exception you have not seen before.

How much this chapter is worth

Classification of Elements and Periodicity in Properties had 12 of the 382 tagged Chemistry questions in the 10 NEET papers from 2021 to 2026 on Pareeksha, about 1.2 per paper (up from 0.88 per paper in 2016–2020). Some digitised papers are a few questions short, so read these as approximate. That looks small, but the same trends also decide answers in p-Block, d- and f-Block and Chemical Bonding questions, which together carried 65 more questions in the same papers. Learning trends well pays off across four chapters. See the chapter-wise weightage page for the full table.

The NMC syllabus for NEET (UG) 2026 lists this unit as: the modern periodic law and present form of the periodic table, s, p, d and f block elements, and periodic trends in atomic and ionic radii, ionisation enthalpy, electron gain enthalpy, valence, oxidation states and chemical reactivity. Check the syllabus with the NEET 2027 information bulletin when it is out; the current version is summarised on our syllabus page.

The two forces behind every trend

Every periodic trend comes from a tug of war between two things:

  1. Effective nuclear charge. Across a period, protons are added to the nucleus while electrons go into the same shell. Inner electrons shield poorly against same-shell electrons, so the outer electrons feel a stronger pull.
  2. Distance and shielding. Down a group, each new period adds a shell. The outer electrons are further away and shielded by more inner electrons, so the pull weakens.

Most exceptions come from a third factor: the stability of particular electron arrangements (filled and half-filled subshells) and poor shielding by d and f electrons.

Atomic and ionic radius

Rule. Radius decreases across a period and increases down a group.

Exceptions and special cases worth knowing:

Case What happens Why
Noble gases Listed radius looks larger than the halogen before them Their radius is a van der Waals radius, while others are covalent radii; the comparison is unfair
Ga vs Al Ga (135 pm) is slightly smaller than Al (143 pm) The ten 3d electrons in Ga shield poorly, so the outer electrons feel a higher effective nuclear charge
Zr vs Hf Almost the same size Lanthanoid contraction: the 4f electrons before Hf shield poorly, cancelling the expected increase

Ions. A cation is smaller than its atom, and an anion is larger. For isoelectronic species (same number of electrons), the one with more protons is smaller. For the 10-electron set: $\mathrm{O^{2-} > F^- > Na^+ > Mg^{2+} > Al^{3+}}$. For the 18-electron set: $\mathrm{S^{2-} > Cl^- > K^+ > Ca^{2+}}$. Counting electrons to check that a set is isoelectronic is itself a NEET question (see the 2025 question below).

Ionisation enthalpy

Rule. First ionisation enthalpy increases across a period and decreases down a group.

The two exceptions in every period, with values for period 2 and 3 in kJ/mol:

Period Group 1 Group 2 Group 13 Group 14 Group 15 Group 16 Group 17 Group 18
2 Li 520 Be 899 B 801 C 1086 N 1402 O 1314 F 1681 Ne 2080
3 Na 496 Mg 737 Al 577 Si 786 P 1012 S 999 Cl 1256 Ar 1520
  • Group 2 > Group 13 (Be > B, Mg > Al). The electron removed from B or Al is a p electron, higher in energy and shielded by the filled s subshell beneath it. It is easier to remove than an s electron from Be or Mg.
  • Group 15 > Group 16 (N > O, P > S). N has a half-filled $2p^3$ subshell. In O, the fourth p electron has to pair up in an orbital that already holds one, and the repulsion between the paired electrons makes it easier to remove.

So the correct period 2 order is Li < B < Be < C < O < N < F < Ne, not the simple left-to-right order.

Successive ionisation enthalpies always increase ($IE_1 < IE_2 < IE_3$), with a very large jump when an electron must come from a filled inner shell. For Na, $IE_2$ is roughly nine times $IE_1$. A question that gives you successive values and asks for the group is answered by finding that jump.

Electron gain enthalpy

Rule. Electron gain enthalpy becomes more negative across a period (atoms near the right want an extra electron) and less negative down a group.

Exceptions:

Case What happens Why
Cl vs F Cl (about −349 kJ/mol) is more negative than F (about −328 kJ/mol) F is very small; the added electron enters a crowded 2p subshell and feels strong repulsion
S vs O S is more negative than O Same reason: small, crowded 2p subshell in O
Noble gases Positive values The electron would have to enter a new, higher shell
Be, Mg, N Close to zero or positive Filled $s^2$ (Be, Mg) or half-filled $p^3$ (N) subshells resist adding an electron

The order by magnitude for the halogens is therefore Cl > F > Br > I. This single fact has been asked again and again, including in the 2026 re-exam.

Electronegativity

Rule. Electronegativity increases across a period and decreases down a group. Fluorine is the most electronegative element (4.0 on the Pauling scale), then oxygen (3.5). Nitrogen and chlorine both have 3.0, which NEET 2025 used as a trick statement.

Electronegativity is not measured directly like ionisation enthalpy; it describes the pull of an atom on shared electrons in a bond. It explains bond polarity, the acidic or basic nature of oxides, and the strength of hydrogen bonds.

Metallic character and the nature of oxides

Metallic character falls across a period and rises down a group. Oxides follow it:

Oxide type Examples Behaviour
Basic $\mathrm{Na_2O}$, CaO, MgO Form hydroxides with water, react with acids
Amphoteric $\mathrm{Al_2O_3}$, ZnO, PbO, $\mathrm{SnO_2}$ React with both acids and bases
Acidic $\mathrm{CO_2}$, $\mathrm{SO_2}$, $\mathrm{SO_3}$, $\mathrm{P_4O_{10}}$, $\mathrm{Cl_2O_7}$ Form acids with water, react with bases
Neutral CO, NO, $\mathrm{N_2O}$ React with neither

For an element with several oxides, the one with the higher oxidation state is more acidic: $\mathrm{Mn_2O_7}$ is acidic while MnO is basic.

Valence and oxidation states

For main-group elements, the common valence is the number of valence electrons (groups 1, 2, 13, 14) or 8 minus that number (groups 15 to 17). Heavier p-block elements also show an oxidation state two lower than the group maximum, because the $ns^2$ pair stays reluctant to bond (the inert pair effect): Tl(I), Pb(II) and Bi(III) are more stable than Tl(III), Pb(IV) and Bi(V). This links straight into our p-block guide.

Four NEET past questions, solved

1. NEET (UG) 2026 Re-exam, Q53. Among the following options, the correct trend in the electron gain enthalpy is

(A) $\mathrm{F}>\mathrm{Cl}>\mathrm{Br}>\mathrm{I}$ (B) $\mathrm{Br}>\mathrm{Cl}>\mathrm{F}>\mathrm{I}$ (C) $\mathrm{Cl}>\mathrm{F}>\mathrm{Br}>\mathrm{I}$ (D) $\mathrm{I}>\mathrm{Br}>\mathrm{Cl}>\mathrm{F}$

Official answer: (C). The magnitude falls down the group except that fluorine, with its crowded 2p subshell, releases less energy than chlorine. Option (A) is the simple-rule answer. See the paper.

2. NEET (UG) 2024, Q63. Arrange the following elements in increasing order of first ionization enthalpy: Li, Be, B, C, N. Choose the correct answer from the options given below:

(A) Li < Be < C < B < N (B) Li < Be < N < B < C (C) Li < Be < B < C < N (D) Li < B < Be < C < N

Official answer: (D). Boron's 2p electron is easier to remove than beryllium's 2s electron, so B sits below Be. Option (C), the left-to-right order, is the trap. See the paper.

3. NEET (UG) 2025, Q47. Which of the following statements are true? A. Unlike Ga that has a very high melting point, Cs has a very low melting point. B. On Pauling scale, the electronegativity values of N and Cl are not the same. C. Ar, $\mathrm{K^+}$, $\mathrm{Cl^-}$, $\mathrm{Ca^{2+}}$, and $\mathrm{S^{2-}}$ are all isoelectronic species. D. The correct order of the first ionization enthalpies of Na, Mg, Al, and Si is Si > Al > Mg > Na. E. The atomic radius of Cs is greater than that of Li and Rb.

(A) A, B, and E only (B) C and E only (C) C and D only (D) A, C, and E only

Official answer: (B). Gallium has a very low melting point (about 303 K), so A is false. N and Cl are both 3.0, so B is false. All five species in C have 18 electrons. In D, Mg is above Al, so the order should be Si > Mg > Al > Na. Cs is the largest of the three alkali metals named in E. Five statements, five separate exceptions or checks: this is the format to expect. See the paper.

4. NEET (UG) 2023 Manipur, Q115. The correct sequence given below containing neutral, acidic, basic and amphoteric oxide each, respectively, is

(A) NO, ZnO, $\mathrm{CO_2}$, CaO (B) ZnO, NO, CaO, $\mathrm{CO_2}$ (C) NO, $\mathrm{CO_2}$, ZnO, CaO (D) NO, $\mathrm{CO_2}$, CaO, ZnO

Official answer: (D). NO is neutral, $\mathrm{CO_2}$ acidic, CaO basic and ZnO amphoteric. See the paper.

A note on chapters that left the syllabus

The s-Block Elements and Hydrogen are marked "old syllabus" in our past-paper data: they appeared in older NEET and AIPMT papers but are not separate units in the current NMC syllabus. Group 1 and 2 elements still appear in trend questions (Na, Mg and Cs in the 2025 question above), so know their positions and trends, but do not study s-block compounds as a separate chapter. The list of dropped chapters is on our syllabus page.

How to study this chapter

  1. Write the period 2 and period 3 ionisation enthalpy values once and mark the two dips in each period. Seeing the numbers fixes the exceptions better than reading about them.
  2. Keep a trend-and-exception table with a reason column. Our inorganic memory tricks post shows how to build and revise it.
  3. Solve the chapter's past questions. The Classification of Elements and Periodicity PYQ post has more solved questions, and the study book chapter is Inorganic Chemistry, chapter 1 (also in Hindi and Telugu).
  4. Take the 15-question chapter test in the NEET section of your dashboard at /dashboard/exams/neet-ug (login needed), then move on to Chemical Bonding, which uses the same ideas.

Frequently asked questions

Why is the first ionisation enthalpy of nitrogen higher than that of oxygen?

Nitrogen has three p electrons, one in each 2p orbital, which is a stable half-filled arrangement. In oxygen the fourth p electron shares an orbital with another electron, and the repulsion between them makes that electron easier to remove. So oxygen's first ionisation enthalpy is lower.

Why does chlorine have a more negative electron gain enthalpy than fluorine?

Fluorine's outer shell is the small 2p subshell, so an incoming electron is pushed close to the electrons already there and feels strong repulsion. Chlorine's 3p subshell is larger, so the added electron is accommodated more easily and more energy is released.

Is gallium smaller than aluminium?

Yes, slightly: about 135 pm against 143 pm. The ten 3d electrons that come before gallium shield the nucleus poorly, so gallium's outer electrons feel a stronger pull than the simple down-the-group rule predicts.

Which element has the highest electronegativity and which has the highest ionisation enthalpy?

Fluorine has the highest electronegativity (4.0 on the Pauling scale). Helium has the highest first ionisation enthalpy of all elements; among elements in a given period, the noble gas at the end has the highest value.

In the 10 NEET papers from 2021 to 2026 on Pareeksha, this chapter had 12 tagged questions, about one per paper. Trend reasoning also decides many questions tagged to p-Block, d- and f-Block and Chemical Bonding, so its real reach is larger.

Share:𝕏fin
Put what you read into practice

Find study material for your next topic

Browse the Reading Room and preview a chapter before choosing what to study.

Browse study material →

Make this reading part of your preparation

Create your free account to bookmark Reading Room chapters and track your practice scores. You’ll return to this article after signing in.

By continuing, you agree to our terms and privacy policy.

No payment needed. Already registered? Use the same options to sign in.

Comments (0)

Sign in to join the discussion.

No comments yet. Be the first to share your thoughts.