Work, Energy and Power gives you a second way to solve mechanics problems. Where Laws of Motion asks you to follow forces moment by moment, the work-energy approach jumps straight from the start of a motion to its end. Many NEET questions in this chapter are designed so that the energy route takes thirty seconds and the force route takes three minutes.
This post uses Pareeksha's own counts from the digitised NEET and AIPMT past papers, then works through five past questions with their official answers.
How often NEET asks Work, Energy and Power
Across Pareeksha's 51 digitised papers from 1988 to 2026, 39 questions are tagged to this chapter. In the 18 NEET sittings from 2016 to 2026, it had 15 of 531 tagged Physics questions, placing it 20th of 29 Physics chapters.
The 8 NEET papers from 2016 to 2020 had 5 questions, about 0.6 per paper. The 10 papers from 2021 to 2026 had 10, one per paper, which is 2.9% of the 347 tagged Physics questions in that period. The two 2026 papers alone had 4.
| NEET year (all sittings combined) | Questions |
|---|---|
| 2013 | 2 |
| 2016 | 2 |
| 2017 | 1 |
| 2018 | 1 |
| 2019 | 1 |
| 2020 | 0 |
| 2021 | 1 |
| 2022 | 1 |
| 2023 | 1 |
| 2024 | 2 |
| 2025 | 1 |
| 2026 | 4 |
Some years had more than one sitting, and a few digitised papers are a few questions short, so treat these as close counts. The chapter also has repeats in the older papers: in Pareeksha's data, the same variable-force question, $F = (7 - 2x + 3x^2)$ N acting from $x = 0$ to $x = 5$ m, appears in both AIPMT 1992 and AIPMT 1994. The work is $\int_0^5 (7 - 2x + 3x^2)\,dx = 35 - 25 + 125 = 135$ J. The full Physics table is on the NEET chapter-wise weightage page.
What the questions test
- Work-energy theorem. Braking distances, stopping forces, and work done by friction.
- Work by a variable force. Force given as a function of position, integrated over the path.
- Power. Lifting loads, pumps and engines; $P = W/t$ and $P = Fv$.
- Collisions. Conservation of momentum, elastic and completely inelastic collisions, kinetic energy lost.
- Potential energy of a spring. How stored energy scales with extension.
Solved NEET past questions
Each question below is copied from the paper with its official answer. The working is ours.
1. Power of a crane
From NEET 2026 (cancelled May sitting), Q159.
The power of a crane, which lifts a mass of 1000 kg to a height of 20 m in 10 s is: $(g=9.8\ \mathrm{m}/{\mathrm{s}}^{2})$
- (A) 19.6 W
- (B) 39.2 W
- (C) 19.6 kW
- (D) 39.2 kW
Official answer: (C)
Solution. Work against gravity is $mgh = 1000 \times 9.8 \times 20 = 1.96 \times 10^5$ J. Power $= \frac{1.96 \times 10^5}{10} = 1.96 \times 10^4$ W $= 19.6$ kW. Options (A) and (C) differ only by a factor of 1000; the unit is the whole question.
2. Friction that fades along the path
From NEET 2026 re-exam, Q1.
A particle of mass $M$ moves along a horizontal $x$ axis from $x=0$ to $x=L$. The coefficient of kinetic friction varies as a function of $x$ as $\mu_k(x)=\mu_0-\alpha x$, where $\mu_0$, $\alpha$ are constants of appropriate dimensions, so that $\mu_k(L)=0$. The total work done by the frictional force during the motion is $n\mu_0 MgL$, where $g$ is the acceleration due to gravity. The value of $n$ is :
- (A) $3$
- (B) $1$
- (C) $\frac{1}{3}$
- (D) $\frac{1}{2}$
Official answer: (D)
Solution. $\mu_k(L) = 0$ gives $\alpha = \frac{\mu_0}{L}$. The friction force at x is $\mu_k(x)Mg$, so its work has magnitude
$\int_0^L \left(\mu_0 - \frac{\mu_0 x}{L}\right)Mg\,dx = Mg\left(\mu_0 L - \frac{\mu_0 L}{2}\right) = \frac{1}{2}\mu_0 MgL$
Friction opposes motion, so the work is negative, but the question asks for n in the magnitude, which is $\frac{1}{2}$. A quicker view: μ falls linearly from $\mu_0$ to 0, so its average is $\frac{\mu_0}{2}$.
3. Braking forces from kinetic energy
From NEET 2025, Q5.
The kinetic energies of two similar cars A and B are 100 J and 225 J respectively. On applying breaks, car A stops after 1000 m and car B stops after 1500 m. If $F_A$ and $F_B$ are the forces applied by the breaks on cars A and B, respectively, then the ratio $F_A/F_B$ is
- (A) $\frac{3}{2}$
- (B) $\frac{2}{3}$
- (C) $\frac{1}{3}$
- (D) $\frac{1}{2}$
Official answer: (B)
Solution. By the work-energy theorem, the braking force times the stopping distance equals the kinetic energy removed: $F = \frac{K}{d}$. $F_A = \frac{100}{1000} = 0.1$ N and $F_B = \frac{225}{1500} = 0.15$ N, so $\frac{F_A}{F_B} = \frac{2}{3}$. No mass or speed is needed.
4. Completely inelastic collision of equal masses
From NEET 2024, Q27.
Two bodies A and B of same mass undergo completely inelastic one dimensional collision. The body A moves with velocity $v_1$ while body B is at rest before collision. The velocity of the system after collision is $v_2$. The ratio $v_1 : v_2$ is :
- (A) 4 : 1
- (B) 1 : 4
- (C) 1 : 2
- (D) 2 : 1
Official answer: (D)
Solution. In a completely inelastic collision the bodies stick together and only momentum is conserved: $mv_1 = 2mv_2$, so $v_2 = \frac{v_1}{2}$ and $v_1 : v_2 = 2 : 1$. Half the kinetic energy is lost here, which is a common follow-up question.
5. Energy stored in a stretched spring
From NEET 2023, Q24.
The potential energy of a long spring when stretched by 2 cm is U. If the spring is stretched by 8 cm, potential energy stored in it will be :
- (A) 2U
- (B) 4U
- (C) 8U
- (D) 16U
Official answer: (D)
Solution. $U = \frac{1}{2}kx^2$, so $U \propto x^2$. Four times the extension gives $4^2 = 16$ times the energy.
Key formulas
- Work by a constant force: $W = \vec{F} \cdot \vec{s} = Fs\cos\theta$
- Work by a variable force: $W = \int F\,dx$ (area under the F-x graph)
- Work-energy theorem: $W_{net} = \Delta K$
- Kinetic energy and momentum: $K = \frac{p^2}{2m}$
- Spring: $F = -kx$, $U = \frac{1}{2}kx^2$
- Power: $P = \frac{W}{t}$, instantaneous $P = \vec{F} \cdot \vec{v}$
- Completely inelastic collision: $v = \frac{m_1u_1 + m_2u_2}{m_1 + m_2}$
- Elastic collision, equal masses, one at rest: velocities are exchanged
- Coefficient of restitution: $e = \frac{\text{speed of separation}}{\text{speed of approach}}$ ($e = 1$ elastic, $e = 0$ completely inelastic)
- Vertical circle on a string: minimum speed at the top $\sqrt{gr}$, at the bottom $\sqrt{5gr}$
Common traps
- Watts versus kilowatts. Power options are often the same digits with different units.
- Sign of work. Friction and braking forces do negative work. Questions sometimes ask for the magnitude, sometimes for the signed value; read which.
- Energy is not conserved in inelastic collisions. Momentum is. Use momentum first, then compute kinetic energy if asked.
- Equal kinetic energy is not equal momentum. For the same K, the heavier body has the larger momentum, since $p = \sqrt{2mK}$.
- Spring energy is quadratic. Doubling the extension gives four times the energy, not twice.
How to study Work, Energy and Power
- Read chapter 2 of the Pareeksha book Laws of Motion, Work-Energy and Rotation, also available in Hindi and Telugu.
- For every mechanics problem you practise, ask first whether an energy method works. It is often faster than forces.
- Solve the chapter's past questions on the NEET past papers page, including the older AIPMT papers, where collision questions are plentiful.
- Take the 15-question chapter test in the NEET section of your dashboard (login needed).
- Read the neighbouring posts: Laws of Motion PYQs for the force side, System of Particles and Rotational Motion PYQs for rotational energy, and Oscillations PYQs for spring energy in SHM.
Frequently asked questions
How many NEET questions come from Work, Energy and Power?
In the 10 NEET papers from 2021 to 2026 on Pareeksha, the chapter had 10 questions, one per paper on average. The two 2026 papers had 4 between them.
Which topics are asked most?
The work-energy theorem, power, and collisions. Questions on variable force and friction that changes with position have appeared in recent papers and need simple integration.
Is integration needed for this chapter?
Simple integration of polynomials is enough. The 2026 re-exam question above needs it, and so does the older variable-force question that appeared in two AIPMT papers.
How do I know when to use energy instead of forces?
If the question asks about speeds or distances at the start and end of a motion, and not about time, energy is usually quicker. If it asks for time or acceleration, use forces and kinematics.

Comments (0)
No comments yet. Be the first to share your thoughts.